Effect of platinum addition on oxidation behaviour of γ/γ′ nickel aluminide
Source abstract
Abstract
Bulk γ/γ′ nickel aluminide alloys of composition (in at.%) Ni–20Al with the addition of 0, 5, 10 and 15Pt were fabricated using arc melting, and the microstructure of the alloys was characterized. The oxidation behaviours of the alloys at 1150 °C were studied and compared in terms of oxide spallation, oxide microstructure and growth, residual stress in the α-Al2O3 scale and oxide/alloy interface morphology. Progressively increased platinum addition into the alloys results in (1) improvement in the resistance to oxide spallation, (2) reduction in oxidation of nickel, (3) lower stresses in the α-Al2O3 scale and (4) more planar oxide/alloy interfaces. In addition, for short-time oxidation (⩽1 h), the stresses in the α-Al2O3 scale on the γ′ phase region of the alloy are lower than those on the γ/γ′ mixed phase region. Discussion on the platinum effect has been focused on selective oxidation of the alloy and stress development in the oxide scale. It is concluded that the selective oxidation of aluminium promoted by platinum plays a crucial role in the evolution of the oxidation behaviour with the platinum addition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Catalytic Processes in Materials Science · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Advances in coating design for high-performance gas turbines10.1557/mrs2003.194 ↗
2. Oxide adhesion and growth characteristics on platinum-modified aluminide coatings10.1016/0257-8972(87)90098-3 ↗
3. Role of Pt content in the microstructural development and oxidation performance of Pt-aluminide coatings produced using a high-activity aluminizing process10.1016/S0921-5093(98)00655-8 ↗
4. Pt and Hf additions to NiAl bond coats and their effect on the lifetime of thermal barrier coatings10.4028/www.scientific.net/MSF.426-432.209 ↗
5. Substrate and bond coat compositions: factors affecting alumina scale adhesion10.1016/S0921-5093(97)00851-4 ↗
6. The effects of platinum concentration on the oxidation resistance of superalloys coated with single-phase platinum aluminide10.1016/S0257-8972(01)01362-7 ↗
7. Synthesis and cyclic oxidation behavior of a (Ni, Pt) Al coating on a desulfurized Ni-base superalloy10.1007/s11661-999-0308-1 ↗
8. Undulation instability of a compressed elastic film on a nonlinear creeping substrate10.1016/S1359-6454(03)00221-0 ↗
9. An analytical model of rumpling in thermal barrier coatings10.1016/j.jmps.2004.11.002 ↗
10. Surface rumpling of a (Ni, Pt)Al bond coat induced by cyclic oxidation10.1016/S1359-6454(00)00156-7 ↗
11. On the rumpling mechanism in nickel–aluminide coatings. Part I. An experimental assessment
12. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
13. D.S. Rickerby, R.G. Wing, Thermal barrier coating for a superalloy article and a method of application thereof, US Patent 5,942,337, 1997.
14. D.S. Rickerby, S.R. Bell, R.G. Wing, Article including thermal barrier coated superalloy substrate, US Patent 5,981,091, 1999.
15. On the interfacial degradation mechanisms of thermal barrier coating systems: effects of bond coat composition10.1016/j.actamat.2010.06.027 ↗
16. Evolution of interfacial toughness of a thermal barrier system with a Pt-diffused gamma/gamma′ bond coat10.1016/j.actamat.2011.07.001 ↗
17. Synthesis and oxidation performance of Al-enriched gamma+gamma′ coatings on Ni-based superalloys via secondary aluminizing10.1016/j.surfcoat.2007.06.053 ↗
18. Microstructure and high temperature oxidation behavior of Pt-modified aluminide bond coats on Ni-base superalloys10.1016/j.pmatsci.2012.08.002 ↗
19. Spinel formation in thermal barrier systems with a Pt-enriched gamma-Ni+gamma′-Ni3Al bond coat10.1016/j.surfcoat.2007.10.030 ↗
20. Oxidation failure of TBC systems: an assessment of mechanisms10.1016/j.surfcoat.2011.05.053 ↗
21. Effect of platinum on the durability of thermal barrier systems with a gamma plus gamma′ bond coat10.1016/j.tsf.2008.08.006 ↗
22. Compositional factors affecting the establishment and maintenance of Al2O3 scales on Ni–Al–Pt systems10.1007/s10853-009-3251-z ↗
23. Effects of platinum on the interdiffusion and oxidation behavior of Ni–Al-based alloys10.4028/www.scientific.net/MSF.461-464.213 ↗
24. Early-stage oxidation behavior of gamma′-Ni(3)Al-based alloys with and without Pt addition
25. Influence of platinum on maintenance of alpha-Al2O3 as a protective scale10.1007/BF00612031 ↗
26. On the measurement of strain in coatings formed on a wrinkled elastic substrate10.1023/A:1018848607100 ↗
27. Piezospectroscopic analysis of interface debonding in thermal barrier coatings10.1111/j.1151-2916.2000.tb01349.x ↗
28. Determination of the piezospectroscopic coefficients for chromium-doped sapphire10.1111/j.1151-2916.1995.tb08493.x ↗
29. Measurement of the stress in oxide scales formed by oxidation of alumina-forming alloys10.1007/BF01046985 ↗
30. Alpha-NiPt(Al) and phase equilibria in the Ni–Al–Pt system at 1150°C10.1016/j.actamat.2005.03.046 ↗
31. Wrinkling of alpha-alumina films grown by thermal oxidation. I. Quantitative studies on single crystals of Fe–Cr–Al alloy10.1016/S1359-6454(98)00133-5 ↗
32. Surface segregation of Pt in gamma′-Ni3Al: a first-principles study10.1016/j.actamat.2006.10.024 ↗
33. Spallation and transient oxide growth on PWA 1484 superalloy10.1016/j.msea.2008.01.043 ↗
34. Interdiffusion in Pt-containing gamma-Ni and gamma′-Ni3Al alloys at 1150°C10.2320/matertrans.MRA2008001 ↗
35. Stress evolution in a Pt-diffused γ/γ′ bond coat after oxidation10.1016/j.surfcoat.2014.02.065 ↗
36. Young modulus of various refractory materials as a function of temperature10.1111/j.1151-2916.1959.tb15462.x ↗
37. Determination of the growth stress and strain in α-Al2O3 scales during the oxidation of Fe–22Cr–4.8Al–0.3Y alloy10.1016/S1359-6454(97)00306-6 ↗