Precipitation in lean Mg–Zn–Ca alloys
Source abstract
Abstract
While lean Mg–Zn–Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca on the microstructure. In this context, the precipitation of Zn and Ca in Mg-1.5Zn-0.25Ca (in wt.%), initially extruded at 330°C, towards Mg–Ca binary precipitates or Ca–Mg–Zn ternary precipitates was probed in a multiscale correlative approach using atom probe tomography (APT) and analytical transmission electron microscopy (TEM). Particular focus was set on the ternary precipitate phase whose structure is debated. In the as-extruded material, the binary precipitates are made of hexagonal C14 Mg2Ca containing up to about 3 at.% of Zn. The ternary ones are based on the hexagonal Ca2Mg5Zn5 prototype structure with a composition close to Ca3Mg11Zn4, as deduced from atomically resolved EDS mapping and scanning TEM imaging, supported by simulations. The precipitation sequence was scrutinized upon linear heating from room temperature to 375°C, starting from the solutionized material. Three exothermic differential scanning calorimetry (DSC) peaks were observed, at respectively 125, 250 and 320°C. Samples were taken after the peak decays, at respectively 205, 260 and 375°C for structural analysis. At 205°C, APT analysis revealed Ca-rich, Zn-rich and Zn‒Ca-rich clusters of about 3 nm in size and with a number density of 5.7 × 1023 m−3. At 260°C, APT and TEM showed mono-layered Zn‒Ca-rich Guinier‒Preston (GP) zones of about 8 nm in size and with a number density of 1.3 × 1023 m−3. At 375°C, larger and highly coherent elongated precipitates were found, with a size of about 50 nm. They occur as binary Mg–Ca precipitates or ternary Ca2Mg6Zn3 precipitates, as deduced from scanning TEM-based energy dispersive X-ray spectroscopy (EDS) and nanodiffraction in TEM. Here, the binary precipitates outnumber the ternary ones, while in the as-extruded material the ternary precipitates outnumber the binary ones, which corresponds well to the calculated phase diagram. We correlated the microstructure to hardness probed by Vickers testing. The largest hardening relates to the end of the 125°C DSC peak and thus to GP zones, which outperform the hardening induced by the nanometer-sized clusters and the larger intermetallic particles. The complexity of the precipitation sequence in lean Mg–Zn–Ca alloys is discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys10.1016/j.actamat.2015.07.021 ↗
2. Recent magnesium alloy development for elevated temperature applications10.1179/095066004225010497 ↗
3. Precipitation hardening of Mg-Ca(-Zn) alloys10.1016/S1359-6462(97)00294-7 ↗
4. Age-hardening response of Mg-0.3 at.%Ca alloys with different Zn contents10.1016/j.msea.2009.07.027 ↗
5. Die Kristallstruktur des CaMg210.1007/BF01789231 ↗
6. Laves-phase structural changes in the system CaAl2-Mg-x(x)10.1021/ic020596m ↗
7. Lattice Parameters and Zone Overlap in Solid Solutions of Lead in Magnesium10.1016/0001-6160(59)90090-2 ↗
8. Raynor · 1959
9. The effect of calcium additions on the oxidation behavior in magnesium alloys10.1016/S1359-6462(00)00344-4 ↗
10. Beffort · 2000 · 215
11. Enhanced age-hardening behaviour in Mg-4 wt.% Zn micro-alloyed with Ca10.1016/j.scriptamat.2004.04.020 ↗
12. The effect of Ag and Ca additions on the age hardening response of Mg-Zn alloys10.1016/j.msea.2013.03.069 ↗
13. Particle effects on recrystallization in magnesium-manganese alloys: particle pinning10.1016/j.msea.2011.02.030 ↗
14. Zinc: a multipurpose trace element10.1007/s00204-005-0009-5 ↗
15. MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants10.1038/nmat2542 ↗
16. Magnesium alloys for temporary implants in osteosynthesis: In vivo studies of their degradation and interaction with bone10.1016/j.actbio.2011.11.008 ↗
17. High-Strength Low-Alloy (HSLA) Mg-Zn-Ca Alloys with Excellent Biodegradation Performance10.1007/s11837-014-0875-5 ↗
18. Mechanical properties, degradation performance and cytotoxicity of Mg-Zn-Ca biomedical alloys with different compositions10.1016/j.msec.2011.07.015 ↗
19. In-vitro evaluation of Mg-4.0Zn-0.2Ca alloy for biomedical application10.1016/S1003-6326(11)61587-2 ↗
20. Biocompatibility and strength retention of biodegradable Mg-Ca-Zn alloy bone implants10.1002/jbm.b.32813 ↗
21. Biodegradability engineering of biodegradable Mg alloys: Tailoring the electrochemical properties and microstructure of constituent phases10.1038/srep02367 ↗
22. Immunological Response to Biodegradable Magnesium Implants10.1007/s11837-014-0874-6 ↗
23. In vivo corrosion of four magnesium alloys and the associated bone response10.1016/j.biomaterials.2004.09.049 ↗
24. Stress shielding and bone resorption in shoulder arthroplasty10.1067/mse.2003.22 ↗
25. The role of zinc in the biocorrosion behavior of resorbable Mg-Zn-Ca alloys10.1016/j.actbio.2019.09.021 ↗
26. Biocorrosion Zoomed In: Evidence for Dealloying of Nanometric Intermetallic Particles in Magnesium Alloys10.1002/adma.201903080 ↗
27. The Effect of Chemistry and 3D Microstructural Architecture on Corrosion of Biodegradable Mg-Ca-Zn Alloys10.1002/adem.202100157 ↗
28. Microstructure and bio-corrosion behavior of Mg-Zn and Mg-Zn-Ca alloys for biomedical applications10.1002/maco.201307588 ↗
29. Influence of Ca and Zn on the microstructure and corrosion of biodegradable Mg-Ca-Zn alloys10.1016/j.corsci.2015.01.027 ↗
30. Sur les alliages ternaires magnésium-zinc-calcium
31. Contribution à l'étude des alliages ternaires, Publications scientifiques et techniques du ministère de l'air
32. The Solid Constitution in the Magnesium-Rich Region of the Mg-Ca-Zn Phase Diagram
33. J.B. Clark, JCPDS, Card 12-0266 (1961).10.1007/BF01785886 ↗
34. Atomic Radii in Crystals10.1063/1.1725697 ↗
35. Extension of Solid Solubility in Magnesium by Rapid Solidification10.1016/0921-5093(90)90175-3 ↗
36. A ternary phase observed in rapidly solidified Mg-Ca-Zn alloys10.1016/S1359-6462(01)00982-4 ↗
37. Precipitate crystal structure determination in melt spun Mg-1.5wt%Ca-6wt%Zn alloy10.1017/S1431927602010413 ↗
38. Second phase formation in melt-spun Mg-Ca-Zn alloys10.1016/j.msea.2004.04.043 ↗
39. Solidification, solution treatment and age hardening of a Mg-1.6 wt.% Ca-3.2 wt.% Zn alloy10.1016/j.actamat.2005.09.023 ↗
40. Precipitation hardening in Mg-Ca-Zn alloys10.1007/s11661-006-0019-9 ↗
41. TEM and 3DAP characterization of an age-hardened Mg-Ca-Zn alloy10.1016/j.scriptamat.2005.05.030 ↗
42. Determination of the solubility range and crystal structure of the Mg-rich ternary compound in the Ca-Mg-Zn system10.1016/j.intermet.2010.08.033 ↗
43. Experimental study of the Ca-Mg-Zn system using diffusion couples and key alloys10.1088/1468-6996/12/2/025003 ↗
44. Critical assessment and thermodynamic modeling of Mg-Ca-Zn system supported by key experiments10.1016/j.calphad.2014.03.003 ↗
45. Ternary compounds and solid-state phase equilibria in Mg-rich side of Mg-Zn-Ca system at 300 degrees C10.1016/S1003-6326(11)60987-4 ↗
46. Evolution of precipitation during non-isothermal ageing of an Mg-Ca-Zn alloy with high Ca content10.1016/j.msea.2012.01.038 ↗
47. www.factsage.com, Version 6.0 (2009)).
48. investigation of structures in as-cast alloys from the Mg-Zn-Ca system10.2478/v10172-012-0193-2 ↗
49. Equilibrium ternary intermetallic phase in the Mg-Zn-Ca system10.1557/jmr.2016.196 ↗
50. Uber Bauprinzipien Des CaZn2-Gitters
51. ASTM, Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought, B951-11 (2018).
52. A lean magnesium-zinc-calcium alloy ZX00 used for bone fracture stabilization in a large growing-animal model10.1016/j.actbio.2020.06.013 ↗
53. Comparison of a resorbable magnesium implant in small and large growing-animal models10.1016/j.actbio.2018.07.044 ↗
54. Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys10.1016/j.actbio.2015.05.004 ↗
55. J.F. Löffler, P. Uggowitzer, C. Wegmann, M. Becker, H. Feichtinger, Process and apparatus for vacuum distillation of high-purity magnesium, patents EP 2,804,964-B1 and US 9,677,151-B2.
56. Application of High-Voltage Electron-Microscopy to Low-Temperature Radiation-Damage Studies in Metals10.1111/j.1365-2818.1973.tb03766.x ↗
57. Crystallographic Tool Box (CrysTBox): automated tools for transmission electron microscopists and crystallographers10.1107/S1600576715017252 ↗
58. EMS - A software package for electron diffraction analysis and HREM image simulation in materials science10.1016/0304-3991(87)90080-5 ↗
59. Computation of Absorptive Form-Factors for High-Energy Electron-Diffraction10.1107/S0108767391004804 ↗
60. Egerton · 2011 · 293
61. Williams · 1996 · 531
62. Dr. Probe: a software for high-resolution STEM image simulation10.1016/j.ultramic.2018.06.003 ↗
63. The Scattering of Electrons by Atoms and Crystals .1. A New Theoretical Approach10.1107/S0365110X57002194 ↗
64. The Art and Science and Other Aspects of Making Sharp Tips10.1116/1.585467 ↗
65. Analysis of three-dimensional atom-probe data by the proximity histogram10.1007/S100050010051 ↗
66. Aspects of the observation of clusters in the 3-dimensional atom probe10.1002/sia.2486 ↗
67. A procedure for quantification of precipitate microstructures from three-dimensional atom probe data10.1016/S0304-3991(02)00319-4 ↗
68. CompuTherm, Pandat software package for calculating phase diagrams and thermodynamic properties of multicomponent alloys, Madison, WI 53719 USA, www.computherm.com.
69. MatCalc software package for computer simulation of phase transformation and microstructure evolution in metallic systems, Vienna, Austria, www.matcalc-engineering.com.
70. Nayeb-Hashemi · 1988
71. Supplemental Literature Review of Binary Phase Diagrams: Cs-In, Cs-K, Cs-Rb, Eu-In, Ho-Mn, K-Rb, Li-Mg, Mg-Nd, Mg-Zn, Mn-Sm, O-Sb, and Si-Sr10.1007/s11669-013-0233-2 ↗
72. Diffusion coefficients of alloying elements in dilute Mg alloys: a comprehensive first-principles study10.1016/j.actamat.2015.10.010 ↗
73. Callister · 2003
74. Stacking-fault mediated plasticity and strengthening in lean, rare-earth free magnesium alloys
75. Local Magnification Effects in the Atom Probe10.1016/0039-6028(91)90449-3 ↗
76. Rational design of a lean magnesium-based alloy with high age-hardening response10.1016/j.actamat.2018.07.054 ↗
77. Atomic structures of ordered monolayer GP zones in Mg-Zn-X (X= Ca, Nd) systems10.1016/j.scriptamat.2022.114744 ↗
78. Segregation-driven exceptional twin-boundary strengthening in lean Mg-Zn-Ca alloys10.1016/j.actamat.2022.117746 ↗
79. A computational thermodynamic model of the Ca–Mg–Zn system10.1016/j.jallcom.2003.08.097 ↗
80. Ca-Mg (calcium-magnesium)10.1361/105497198770342012 ↗
81. Influence of predeformation and ageing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress10.1016/S1359-6454(98)00296-1 ↗
82. Hosford · 2010
83. Friedel · 1964 · 376