journal article·2024-10Open access

Effect of precipitates on the dominant active slip systems in Mg-4.5Zn (wt.%) alloy

Biaobiao Yang, Jun Wang, Mahmoud Reza Ghandehari Ferdowsi, Qi Chao, Xiang Gao, Yunping Li, Yuman Zhu, Matthew Barnett, Javier LLorca

Acta Materialia· Volume 278

Abstract

The dominant active slip systems during plastic deformation of an extruded Mg-4.5Zn (wt.%) alloy with and without β 1 ′ precipitates were investigated by means of advanced electron back-scattered diffraction techniques and transmission electron microscopy . Planar slip traces were found in 92% of the grains with slip traces in the sample without precipitates and, among them, the primary active slip systems were basal slip and pyramidal II slip. However, non-planar slip traces were observed in 76% of the grains with slip traces in the sample with precipitates, and among them, prismatic slip exhibited the highest activity, followed by pyramidal II slip. The change in the dominant active slip systems with precipitation was attributed to the strong hardening induced by β 1 ′ precipitates on basal slip. This favoured the cross-slip of basal slip dislocations to prismatic plane and plastic deformation progressed by the glide of prismatic slip dislocations parallel to the precipitates.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. The forming of magnesium alloy forgings for aircraft and automotive applications10.12913/22998624/64003 ↗
2. Development and application of magnesium alloy parts for automotive OEMs: A review10.1016/j.jma.2022.12.015 ↗
3. Biodegradable Magnesium-Based Implants in Orthopedics—A General Review and Perspectives
4. Microstructure, Deformation, and Property of Wrought Magnesium Alloys10.1007/s11661-020-05974-z ↗
5. Plastic Deformation of Magnesium Single Crystals10.1007/BF03397694 ↗
6. Effect of temperature on the flow stress and strain-hardening coefficient of magnesium single crystals10.1007/BF03397908 ↗
7. First-principles data for solid-solution strengthening of magnesium: From geometry and chemistry to properties10.1016/j.actamat.2010.06.045 ↗
8. Mechanistic origin and prediction of enhanced ductility in magnesium alloys10.1126/science.aap8716 ↗
9. A Review on Casting Magnesium Alloys: Modification of Commercial Alloys and Development of New Alloys10.1016/j.jmst.2016.07.001 ↗
10. Towards development of a high-strength stainless Mg alloy with Al-assisted growth of passive film10.1038/s41467-022-33480-w ↗
11. Design of single-phased magnesium alloys with typically high solubility rare earth elements for biomedical applications: Concept and proof
12. Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature10.1016/j.actamat.2015.03.053 ↗
13. Mechanistic origin of the enhanced strength and ductility in Mg-rare earth alloys10.1016/j.actamat.2022.118550 ↗
14. A formation criterion for Order-Disorder (OD) phases of the Long-Period Stacking Order (LPSO)-type in Mg-Al-RE (Rare Earth) Ternary Systems10.1038/s41598-017-12506-0 ↗
15. Precipitation and Hardening in Magnesium Alloys10.1007/s11661-012-1217-2 ↗
16. Reverse tension/compression asymmetry of a Mg-Y-Zn alloys containing LPSO phases10.1016/j.msea.2015.09.003 ↗
17. The effect of LPSO on the deformation mechanism of Mg-Gd-Y-Zn-Zr magnesium alloy10.1016/j.jma.2016.03.001 ↗
18. Ageing behavior of extruded Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr (wt.%) alloy containing LPSO phase and γ′ precipitates10.1038/srep43391 ↗
19. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging10.1016/j.actamat.2020.09.024 ↗
20. Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn10.1016/j.actamat.2004.07.015 ↗
21. Effect of grain size on slip activity in pure magnesium polycrystals10.1016/j.actamat.2014.10.001 ↗
22. Sensitivity of deformation twinning to grain size in titanium and magnesium10.1016/j.actamat.2011.09.018 ↗
23. Grain size effects on dislocation and twinning mediated plasticity in magnesium10.1016/j.scriptamat.2015.09.008 ↗
24. Texture tailoring and bendability improvement of rolled AZ31 alloy using {10-12} twinning: The effect of precompression levels10.1016/j.jma.2019.09.002 ↗
25. Deformation mechanisms of dual-textured Mg-6.5Zn alloy with limited tension-compression yield asymmetry10.1016/j.actamat.2023.118766 ↗
26. Effect of micro-texture on fracture location in friction stir weld of Mg alloy AZ61 during tensile test10.1016/S1359-6462(03)00210-0 ↗
27. Quasi-in-situ study on {10-12} twinning-detwinning behavior of rolled Mg-Li alloy in two-step compression (RD)-compression (ND) process10.1016/j.jma.2021.01.006 ↗
28. Effect of grain size, texture and density of precipitates on the hardness and tensile yield stress of Mg-14Gd-0.5Zr alloys10.1016/j.matdes.2016.10.074 ↗
29. The role of atomic scale segregation in designing highly ductile magnesium alloys10.1016/j.actamat.2016.06.024 ↗
30. Evolution of deformation twinning mechanisms in magnesium from low to high strain rates10.1016/j.matdes.2022.110646 ↗
31. Fabrication of high-strength Mg-Gd-Zn-Zr alloy via selective laser melting10.1016/j.matchar.2020.110377 ↗
32. Enhancing plastic deformability of Mg and its alloys—A review of traditional and nascent developments10.1016/j.jma.2017.11.001 ↗
33. Designing high ductility in magnesium alloys10.1016/j.actamat.2019.04.019 ↗
34. Designing highly ductile magnesium alloys: current status and future challenges10.1080/10408436.2021.1947185 ↗
35. Effect of Alloying Elements on Microstructure, Texture Development, and Mechanical Properties of Magnesium Alloys10.4028/www.scientific.net/AMM.217-219.382 ↗
36. Effects of alloying elements on microstructures and mechanical properties of wrought Mg-MM-Sn alloy10.1016/j.jallcom.2007.12.098 ↗
37. Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying10.1016/j.jma.2020.08.016 ↗
38. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg-Y alloys10.1016/j.actamat.2010.08.031 ↗
39. Ductility improvement of Mg alloys by solid solution: Ab initio modeling, synthesis and mechanical properties10.1016/j.actamat.2014.02.011 ↗
40. Underlying slip/twinning activities of Mg-xGd alloys investigated by modified lattice rotation analysis10.1016/j.jma.2021.06.008 ↗
41. Effect of rare-earth element additions on high-temperature mechanical properties of AZ91 magnesium alloy10.1007/s11661-005-0022-6 ↗
42. Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests10.1016/j.actamat.2021.117151 ↗
43. Nanoscale coherent interface strengthening of Mg alloys10.1039/C8NR04805C ↗
44. Improving ductility of a Mg alloy via non-basal slip induced by Ca addition10.1016/j.ijplas.2019.04.020 ↗
45. Highly deformable Mg-Al-Ca alloy with Al2Ca precipitates10.1016/j.actamat.2020.09.006 ↗
46. A rare-earth free magnesium alloy with improved intrinsic ductility10.1038/s41598-017-10384-0 ↗
47. A new dilute Mg-Mn-Al alloy with exceptional rollability and ductility at room temperature10.1016/j.msea.2022.144229 ↗
48. Segregation-driven exceptional twin-boundary strengthening in lean Mg-Zn-Ca alloys10.1016/j.actamat.2022.117746 ↗
49. Heterogeneous fiberous structured Mg-Zn-Zr alloy with superior strength-ductility synergy10.1016/j.jmst.2022.06.021 ↗
50. Activation of second-order pyramidal slip and other secondary mechanisms in solid solution Mg-Zn alloys and their effect on tensile ductility
51. Recent advances of high strength Mg-RE alloys: Alloy development, forming and application10.1016/j.jmrt.2023.08.055 ↗
52. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys10.1016/S1359-6462(02)00497-9 ↗
53. Effect of precipitate shape on slip and twinning in magnesium alloys10.1016/j.actamat.2010.11.060 ↗
54. Effect of Precipitate Shape and Habit on Mechanical Asymmetry in Magnesium Alloys10.1007/s11661-012-1466-0 ↗
55. Insight from in situ microscopy into which precipitate morphology can enable high strength in magnesium alloys10.1016/j.jmst.2018.01.017 ↗
56. A novel strategy to strengthen the hexagonal close-packed (HCP) alloys10.1016/j.jallcom.2021.162346 ↗
57. Revisiting Precipitation kinetics in Mg-Zn alloy - a multi-characterization and modeling study10.1016/j.actamat.2023.119276 ↗
58. Mechanism of Precipitation Hardening of Magnesium-Zinc Alloys10.2320/matertrans1960.12.323 ↗
59. Transmission electron microscopy study of age hardening in a Mg-5 wt.% Zn alloy10.1016/0001-6160(65)90039-8 ↗
60. Precipitate characteristics and their effect on the prismatic-slip-dominated deformation behaviour of an Mg-6 Zn alloy10.1016/j.actamat.2013.03.033 ↗
61. Stress relaxations during cyclic loading-unloading in precipitation hardened Mg-4.5Zn10.1016/j.actamat.2020.116531 ↗
62. Effect of precipitate shape and orientation on Orowan strengthening of non-basal slip modes in hexagonal crystals, application to magnesium alloys10.1016/j.msea.2016.04.056 ↗
63. Effect of particles on the formation of deformation twins in a magnesium-based alloy10.1016/j.msea.2009.04.001 ↗
64. Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys10.1016/j.actamat.2019.03.027 ↗
65. Interactions between basal dislocations and β1′ precipitates in Mg-4Zn alloy: Mechanisms and strengthening10.1016/j.actamat.2020.01.028 ↗
66. Influence of precipitation on tension and compression twinning in Mg-6.5Zn alloy10.1016/j.scriptamat.2021.114253 ↗
67. Solid solution and precipitation strengthening effects in basal slip, extension twinning and pyramidal slip in Mg-Zn alloys10.1016/j.actamat.2021.117374 ↗
68. Investigation of precipitate hardening of slip and twinning in Mg5%Zn by micropillar compression10.1016/j.actamat.2015.08.012 ↗
69. Precipitate strengthening of pyramidal slip in Mg-Zn alloys10.1016/j.msea.2020.140697 ↗
70. Origin of nucleation and growth of extension twins in grains unsuitably oriented for twinning during deformation of Mg-1%Al
71. A novel pole figure inversion method: specification of the MTEX algorithm10.1107/S0021889808030112 ↗
72. F. Bachmann, R. Hielscher, H. Schaeben, Texture Analysis with MTEX - Free and Open Source Software Toolbox, Solid State Phenom. 160 (2010) 63-68. https://doi.org/10.4028/www.scientific.net/SSP.160.63.10.4028/www.scientific.net/SSP.160.63 ↗
73. Identification of active slip systems in polycrystals by Slip Trace - Modified Lattice Rotation Analysis (ST-MLRA)10.1016/j.scriptamat.2022.114648 ↗
74. An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al10.1016/j.ijplas.2019.02.014 ↗
75. Effect of solutes on strength and ductility of Mg alloys10.1016/j.actamat.2019.09.018 ↗
76. V. Tong, E. Wielewski, B. Britton, Characterisation of slip and twinning in high rate deformed zirconium with electron backscatter diffraction, (2018). https://doi.org/10.48550/arXiv.1803.00236.
77. D.M. Henderson, Euler angles, quaternions, and transformation matrices, 1977. https://ntrs.nasa.gov/citations/19770024290 (accessed October 10, 2023).
78. Investigation of Prism 〈a〉 Slip in Warm-Rolled AZ31 Alloy10.1007/s11661-011-0800-2 ↗
79. Chun · 2016 · 345
80. Review Grain and subgrain characterisation by electron backscatter diffraction10.1023/A:1017973432592 ↗
81. Electron backscatter diffraction: Strategies for reliable data acquisition and processing10.1016/j.matchar.2009.05.011 ↗
82. S. Erich, B. Walter, Kristallplastizität: Mit Besonderer Berücksichtigung der Metalle, 1935. https://link.springer.com/book/10.1007/978-3-662-34532-0 (accessed December 5, 2022).
83. Plane-Strain Compression of Magnesium and Magnesium Alloy Crystals
84. Double twinning mechanisms in magnesium alloys via dissociation of lattice dislocations
85. Double twinning
86. Yield point elongation due to twinning in a magnesium alloy10.1016/j.actamat.2011.11.022 ↗
87. Direct measurement of critical resolved shear stress of prismatic and basal slip in polycrystalline Ti using high energy X-ray diffraction microscopy10.1016/j.actamat.2017.05.015 ↗
88. Crystallographic classification of kink bands in an extruded Mg-Zn-Y alloy using intragranular misorientation axis analysis10.1016/j.actamat.2012.12.026 ↗
89. Accurate determination of active slip systems for improved geometrical criteria of basal-to-basal slip transfer at grain boundaries in pure Mg10.1016/j.actamat.2022.118536 ↗
90. Revealing the role of pyramidal slip in the high ductility of Mg-Li alloy
91. Effects of Zn on 〈c + a〉 slip and grain boundary segregation of Mg alloys10.1016/j.scriptamat.2018.09.022 ↗
92. Solid solution strengthening of magnesium single crystals—I alloying behaviour in basal slip10.1016/0001-6160(69)90151-5 ↗
93. Solid solution strengthening of magnesium single crystals—ii the effect of solute on the ease of prismatic slip10.1016/0001-6160(69)90152-7 ↗
94. Effect of Zn Concentration and Grain Size on Prismatic Slip in Mg-Zn Binary Alloys
95. Substitutional solution hardening of magnesium single crystals
96. Strain hardening of as-extruded Mg-xZn (x = 1, 2, 3 and 4 wt%) alloys10.1016/j.jmst.2018.09.015 ↗
97. Effect of alloying elements on the elastic properties of Mg from first-principles calculations10.1016/j.actamat.2009.04.038 ↗
98. On the strength of dislocation interactions and their effect on latent hardening in pure Magnesium10.1016/j.ijplas.2014.06.010 ↗
99. Effect of basal precipitates on extension twinning and pyramidal slip: A micro-mechanical and electron microscopy study of a Mg-Al binary alloy10.1016/j.actamat.2020.02.037 ↗
100. Basal dislocation/precipitate interactions in Mg-Al alloys: an atomistic investigation10.1088/1361-651X/ab2de0 ↗