journal article·2022-08

Dispersion of reinforcing micro-particles in the powder bed fusion additive manufacturing of metal matrix composites

Yanming Zhang, Yefeng Yu, Lu Wang, Yang Li, Feng Lin, Wentao Yan

Acta Materialia· Volume 235
Publisher page

Abstract

Understanding the complex multi-phase interactions are vital for defects reduction in additive manufacturing (AM) of metal matrix composites. In this study, we propose a high-fidelity model to reveal the dynamics of molten pool and reinforcing solid particles during the AM process, using the resolved Computational Fluid Dynamics and Discrete Element Method (CFD-DEM) with bi-directional momentum and energy exchange. Our model is validated against the electron beam melting (EBM) experiments of tungsten-copper composites fabricated with elemental powder blends. The results demonstrate that the interface effect, including the dynamic wetting phenomena and Laplace pressure, play significant roles in the dynamics of reinforcing solid particles. On the other hand, the existence of reinforcing solid particles in the molten pool changes the molten pool size and alters the flow field during the melting process. Although the interface effect causes tungsten particle agglomeration at single track surface, the layer-wise deposition scheme with proper layer thickness eliminates the cluster and promotes the uniform tungsten distribution in the densified bulk sample, which shows the capability of AM to achieve spontaneous dispersion of reinforcing solid particles in the metal matrix. This work provides unprecedented details about the multi-phase dynamics in metal matrix composite AM process.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Particle Dynamics in Fluid Flows

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Clyne · 1995
2. Wear and corrosion resistance of laser clad Ni2Si/NiSi composite coatings10.1016/S0257-8972(03)00240-8 ↗
4. Metal matrix composites–from science to technological significance10.1016/j.compscitech.2005.05.027 ↗
5. Metal matrix composites
6. Method of stir casting of aluminum metal matrix composites: a review
7. Properties of P/M processed particle reinforced metal matrix composites specified by reinforcement concentration and matrix-to-reinforcement particle size ratio10.1016/j.actamat.2005.08.036 ↗
8. Powder metallurgy of al-based metal matrix composites reinforced with β-Al3Mg2 intermetallic particles: analysis and modeling of mechanical properties10.1016/j.actamat.2009.06.017 ↗
9. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles10.1038/nature16445 ↗
10. Additive manufacturing of in situ metal matrix composites
11. Scientific, technological and economic issues in metal printing and their solutions10.1038/s41563-019-0408-2 ↗
12. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
13. Advances in additive manufacturing of metal-based functionally graded materials10.1080/09506608.2019.1709354 ↗
14. Aluminum with dispersed nanoparticles by laser additive manufacturing10.1038/s41467-019-12047-2 ↗
15. A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites10.1016/j.ceramint.2018.08.083 ↗
16. A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting10.1016/S1003-6326(20)65357-2 ↗
17. Development of metal matrix composites by laser-assisted additive manufacturing technologies: a review10.1007/s10853-020-04730-3 ↗
18. Rapid fabrication of al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting10.1016/j.scriptamat.2014.10.011 ↗
19. Laser additive manufacturing of nano-TiC reinforced ni-based nanocomposites with tailored microstructure and performance10.1016/j.compositesb.2018.12.146 ↗
20. Influence of process parameters in additive manufacturing of highly reinforced 316l/SiCp composites10.1016/j.jmatprotec.2021.117325 ↗
21. Denudation of metal powder layers in laser powder bed fusion processes10.1016/j.actamat.2016.05.017 ↗
22. Fluid and particle dynamics in laser powder bed fusion10.1016/j.actamat.2017.09.051 ↗
23. Bulk-explosion-induced metal spattering during laser processing
24. Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed X-ray imaging10.1126/science.aav4687 ↗
25. Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding10.1016/j.ijmachtools.2020.103555 ↗
26. Critical instability at moving keyhole tip generates porosity in laser melting10.1126/science.abd1587 ↗
27. Powder-spreading mechanisms in powder-bed-based additive manufacturing: experiments and computational modeling10.1016/j.actamat.2019.08.030 ↗
28. Packing quality of powder layer during counter-rolling-type powder spreading process in additive manufacturing10.1016/j.ijmachtools.2020.103553 ↗
29. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
30. Evaporation model for keyhole dynamics during additive manufacturing of metal10.1103/PhysRevApplied.14.064039 ↗
31. A mixed interface-capturing/interface-tracking formulation for thermal multi-phase flows with emphasis on metal additive manufacturing processes10.1016/j.cma.2021.113910 ↗
32. Universal scaling laws of keyhole stability and porosity in 3D printing of metals10.1038/s41467-021-22704-0 ↗
33. Meso-scale modeling of multiple-layer fabrication process in selective electron beam melting: inter-layer/track voids formation10.1016/j.matdes.2017.12.031 ↗
34. Fundamental consolidation mechanisms during selective beam melting of powders10.1088/0965-0393/21/8/085011 ↗
35. Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting10.1016/j.actamat.2017.05.061 ↗
36. Keyhole-induced porosities in laser-based powder bed fusion (L-PBF) of Ti6Al4V: high-fidelity modelling and experimental validation
37. Dynamics of pore formation during laser powder bed fusion additive manufacturing10.1038/s41467-019-10009-2 ↗
38. Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing10.1126/science.aay7830 ↗
39. Spattering and denudation in laser powder bed fusion process: multiphase flow modelling10.1016/j.actamat.2020.06.033 ↗
40. Semi-coupled resolved CFD–DEM simulation of powder-based selective laser melting for additive manufacturing10.1016/j.cma.2021.113707 ↗
41. Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron X-ray imaging
42. Quantitative investigation of gas flow, powder-gas interaction, and powder behavior under different ambient pressure levels in laser powder bed fusion10.1016/j.ijmachtools.2021.103797 ↗
43. A porosity technique for the definition of obstacles in rectangular cell meshes
44. Wei · 2006
45. Enthalpy-porosity technique for modeling convection-diffusion phase change: application to the melting of a pure metal
46. Multiscale modeling of electron beam and substrate interaction: a new heat source model10.1007/s00466-015-1170-1 ↗
47. Volume of fluid (VOF) method for the dynamics of free boundaries10.1016/0021-9991(81)90145-5 ↗
48. Israelachvili · 2015
49. Analytical expressions for thermophysical properties of solid and liquid tungsten relevant for fusion applications10.1016/j.nme.2017.08.002 ↗
50. Solid-state contributions to densification during liquid-phase sintering10.1007/s11663-996-0003-1 ↗
51. Observations of particle-melt pool impact events in directed energy deposition
52. Analysis of conventional drag and lift models for multiphase CFD modeling of blood flow
53. An analytical solution of the critical interface velocity for the encapturing of insoluble particles by a moving solid/liquid interface10.1007/s11661-998-0186-y ↗
54. An analytical model for the interaction between an insoluble particle and an advancing solid/liquid interface10.1007/BF02801184 ↗
55. Pore elimination mechanisms during 3D printing of metals
56. Theoretical study and pathways for nanoparticle capture during solidification of metal melt
57. NIST-JANAF thermochemical tables
58. Cagran · 2000
59. Reference data for the density and viscosity of liquid copper and liquid tin10.1063/1.3467496 ↗
60. Review of data for the surface tension of pure metals10.1179/imr.1993.38.4.157 ↗
61. Solid-liquid interface energy of metals at melting point and undercooled state10.2320/matertrans.43.721 ↗
62. Effect of atmosphere on surface tension of glass10.1111/j.1151-2916.1958.tb13497.x ↗
63. Effect of pressure on the surface tension of water. adsorption of low molecular weight gases on water at 25. deg10.1021/j100615a017 ↗
64. Lotus-leaf-like microstructures on tungsten surface induced by one-step nanosecond laser irradiation10.1016/j.surfcoat.2016.10.033 ↗
65. Numerical simulations of flows with moving contact lines10.1146/annurev-fluid-010313-141338 ↗
66. Drop impact onto a dry surface: role of the dynamic contact angle10.1016/j.colsurfa.2008.03.005 ↗
67. VOF simulations of the contact angle dynamics during the drop spreading: standard models and a new wetting force model10.1016/j.cis.2014.07.004 ↗