journal article·2023-07Open access

Microstructural effects on fatigue crack initiation mechanisms in a near-alpha titanium alloy

Conghui Liu, Xu Xu, Tianzhu Sun, Rhys Thomas, João Quinta da Fonseca, Michael Preuss

Acta Materialia· Volume 253

Abstract

The role of different microstructural constituents on crack initiation in two-phase titanium alloys is still an area of great controversy. The present study investigates the effects of primary α volume fraction and concomitant macrozones on two different fatigue crack initiation modes concurrently observed in a near-α titanium alloy. Statistically representative regions were monitored in quasi-in-situ studies by interrupting fatigue testing to detect slip trace formation leading to crack initiation. In addition, high-resolution 2D strain maps were generated to quantify in-plane shear strains of slip traces related to microstructural features. The detailed analysis demonstrates that at 90% of the proof stress basal 〈a〉 slip plays a crucial role in crack initiation, regardless of whether cracking is transgranular or intergranular. In addition, a distinct shift from transgranular to intergranular crack initiation was observed with increasing αp fraction driven by the increased number of αp/αp grain boundaries. The high-resolution 2D strain mapping suggest that these intergranular cracks initiated from a burst of basal 〈a〉 slip starting from (0001) twist grain boundaries but penetrating one side of the grain pair in case of a partial (0001) twist grain boundary. From these observations, a new criterion for intergranular cracking is proposed based on a geometrical grain boundary parameter and the preference of neighbouring αp grain pair well aligned for basal 〈a〉 slip. It was found that while (0001) twist grain boundaries increase with increasing αp fraction, macrozones do not further enhance their frequency. However, macrozones of hard orientated grains did enhance transgranular crack formation by potentially higher local stress and increasing slip length over clustered αp grains with low misorientation reducing the requirement for out-of-plane shear.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Influence of processing on microstructure and mechanical properties of (α+ β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
2. Mechanical properties of alloys consisting of two ductile phases10.1016/j.pmatsci.2005.10.003 ↗
3. The effect of the alpha-phase volume fraction and stress ratio on the fatigue crack-growth characteristics of the near-Alpha Imi 834 Ti alloy10.1016/0142-1123(92)90010-A ↗
4. Effect of volume fraction of alpha and transformed beta on the high cycle fatigue properties of bimodal Ti6Al4V alloy10.1088/1757-899X/201/1/012035 ↗
5. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
6. Titanium (engineering materials and processes)
7. Texture effects under tension and torsion loading conditions in titanium alloys10.1016/j.ijfatigue.2005.06.045 ↗
8. The effects of texture in titanium alloys for engineering components under fatigue10.1016/S0142-1123(01)00124-4 ↗
9. A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions10.1016/S0142-1123(03)00145-2 ↗
10. Influence of texture on fatigue properties of Ti-6Al-4 V10.1007/BF02657799 ↗
11. Textures in titanium alloys-an industrial perspective on deformation, transformation and properties10.1002/9780470444191.ch58 ↗
12. The effect of microstructure and texture on mechanical properties of Ti6-410.1016/j.ijfatigue.2009.02.014 ↗
13. Effect of microtexture on fatigue cracking in Ti–6Al–4 V10.1016/j.actamat.2007.06.034 ↗
14. Influence of microtexture on early plastic slip activity in Ti-6Al-4 V Polycrystals10.1007/s11661-018-4569-4 ↗
15. Incipient slip and long range plastic strain localization in microtextured Ti-6Al-4 V titanium10.1016/j.actamat.2016.04.057 ↗
16. Mechanical study of crystalline orientation distribution in Ti-6Al-4V: an assessment of micro-texture induced load partitioning10.1016/j.matdes.2017.10.011 ↗
17. Slip and fatigue crack formation processes in an α/β titanium alloy in relation to crystallographic texture on different scales10.1016/j.actamat.2008.04.036 ↗
18. Observations of Facet Formation in Near-α Titanium and Comments on the Role of Hydrogen10.1007/s11661-010-0507-9 ↗
19. Characterization of fatigue crack-initiation facets in relation to lifetime variability in Ti–6Al–4 V10.1016/j.ijfatigue.2011.11.017 ↗
20. Crystallography of fracture facets in a near-alpha titanium alloy10.1007/s11661-006-0144-5 ↗
21. The role of microtexture on the faceted fracture morphology in Ti–6Al–4 V subjected to high-cycle fatigue10.1016/j.actamat.2010.03.036 ↗
22. Local texture and fatigue crack initiation in a Ti-6Al-4 V titanium alloy10.1046/j.1460-2695.2002.00480.x ↗
23. Microstructural influences on very-high-cycle fatigue-crack initiation in Ti-624610.1007/s11661-008-9633-z ↗
24. Understanding the contributions of normal-fatigue and static loading to the dwell fatigue in a near-alpha titanium alloy10.1007/s11661-004-0058-z ↗
25. Fatigue crack initiation in WASPALOY at 20 °C10.1007/s11661-007-9178-6 ↗
26. Effect of slip length and slip character on titanium alloys
27. On the mechanism of fatigue and dwell-fatigue crack initiation in Ti-6Al-4 V10.1016/j.scriptamat.2020.03.031 ↗
28. Multi-dimensional study of the effect of early slip activity on fatigue crack initiation in a near-a titanium alloy
29. Strain localization and fatigue crack formation at (0001) twist boundaries in titanium alloys
30. Plastic Strain Mapping with Sub-micron Resolution Using Digital Image Correlation10.1007/s11340-012-9685-2 ↗
31. Multi-dimensional study of the effect of early slip activity on fatigue crack initiation in a near-α titanium alloy
32. A self-aligning four-point bend testing rig and sample geometry effect in four-point bend fatigue10.1016/S0142-1123(99)00084-5 ↗
33. Callister · 2011
34. Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation10.1016/j.actamat.2004.09.040 ↗
35. Effect of nanoscale α 2 precipitation on strain localisation in a two-phase Ti-alloy10.1016/j.actamat.2017.02.068 ↗
36. An experimental study of the polycrystalline plasticity of austenitic stainless steel10.1016/j.ijplas.2015.05.012 ↗
37. Characterisation of irradiation enhanced strain localisation in a zirconium alloy10.1016/j.mtla.2019.100248 ↗
38. M. Atkinson, R. Thomas, A. Harte, P. Crowther, J. da Fonseca, DefDAP: Deformation Data Analysis in Python, (2020).
39. Identification of active slip mode in a hexagonal material by correlative scanning electron microscopy10.1016/j.actamat.2019.06.024 ↗
40. Active slip system identification in polycrystalline metals by digital image correlation (DIC)10.1007/s11340-016-0217-3 ↗
41. FIB lift-out specimen preparation techniques
42. International · 2011
43. Testing · 2014
44. The influence of load holds on the fatigue behaviour of drawn Ti-6Al-4 V wires10.1016/j.ijfatigue.2017.01.043 ↗
45. Effect of microstructure on the fatigue properties of Ti–6Al–4 V titanium alloys10.1016/j.matdes.2012.10.059 ↗
46. On the probabilistic assessment of variability in fatigue life in a near α titanium alloy Timetal 834: crystallography of fatigue crack initiating facets10.1016/j.actamat.2021.117214 ↗
47. Effect of crystallographic orientation and geometrical compatibility on fatigue crack initiation and propagation in rolled Ti-6Al-4 V alloy10.1016/j.actamat.2019.07.025 ↗
48. The effects of crystallographic orientation on fatigue crack initiation behavior in Ti-6Al-4 V10.1016/j.ijfatigue.2018.07.039 ↗
49. Fatigue crack initiation in as forged Ti–6Al–4 V bars with macrozones present10.1016/j.ijfatigue.2015.05.020 ↗
50. Effects of microstructure on the short fatigue crack initiation and propagation characteristics of biomedical alpha/beta titanium alloys10.1007/s11661-000-0222-z ↗
51. Early slip activity and fatigue crack initiation of a near alpha titanium alloy, MATEC Web of Conferences
52. Slip activity during low-stress cold creep deformation in a near-α titanium alloy10.1016/j.actamat.2022.117691 ↗
53. Texture and microtexture variations in a near-α titanium forged disk of bimodal microstructure10.1016/j.actamat.2012.01.031 ↗
54. Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet10.1016/j.actamat.2005.03.043 ↗
55. Compatibility of deformation in two-phase Ti-Al alloys: dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
56. The effect of grain orientation on fracture morphology during high-cycle fatigue of Ti–6Al–4 V10.1016/j.actamat.2009.04.018 ↗
57. Microscopic strain localisation in Ti-6Al-4 V during uniaxial tensile loading10.1016/j.msea.2016.10.099 ↗
58. Understanding the role of local texture variation on slip activity in a two-phase titanium alloy10.1016/j.actamat.2021.117111 ↗
59. Discovery via integration of experimentation and modeling: three examples for titanium alloys10.1007/s11837-014-1197-3 ↗
60. Asymmetric tilt grain boundary structure and energy in copper and aluminium10.1080/14786430701455321 ↗
61. The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals10.1016/j.ijplas.2008.09.002 ↗
62. Correlation between structure, energy, and ideal cleavage fracture for symmetrical grain boundaries in fcc metals10.1557/JMR.1990.1708 ↗
63. Microstructurally short fatigue crack initiation and growth in Ti-6.8Mo-4.5Fe-1.5Al10.1016/S0921-5093(99)00575-4 ↗
64. ECCI based characterization of dislocation shear in polycrystalline arrays during heterogeneous deformation of commercially pure titanium10.1016/j.matchar.2018.06.003 ↗