journal article·2023-01

Investigation of the O phase in the Ti–22Al–25Nb alloy during deformation at elevated temperatures: Plastic deformation mechanism and effect on B2 grain boundary embrittlement

Bin Shao, Wei Tang, Shu Guo, Yingying Zong, Debin Shan, Bin Guo

Acta Materialia· Volume 242
Publisher page

Abstract

The Ti–22Al–25Nb alloy, which possesses a complex microstructure, is a new type of lightweight high-temperature structural material. Revealing the effects of microstructure and temperature on the mechanical properties of this alloy is crucial for applications in the aerospace industry. In this study, we designed three types of microstructures of the Ti–22Al–25Nb alloy, namely, single-phase B2, dual-phase α 2 + B2, and triple-phase O + α 2 + B2, and investigated their deformation and fracture behavior with increasing temperature (25,750,and 930 °C). The O + α 2 + B2 sample possessed the best comprehensive mechanical properties, and the softening of the O phase at elevated temperatures was mainly due to massive {001}<110> O basal slip and twinning. The evolution of O phase twins with increasing temperature can be described as follows: (021) → (021) + (110) → (110). At 750 °C, (021) twins formed in the strip-shaped O phase in B2 grains, while (110) twins formed in the spheroidized O phase at B2 grain boundaries. In addition, B2 grain boundary embrittlement was observed at elevated temperatures, and its mechanism can be summarized as follows. Elevated temperatures induced element segregation at the grain boundaries between hypersaturated-state B2 grains, enriching Ti and Al and diffusing Nb into the B2 grains on the nanometer scale, leading to a thin-shell O phase with a thickness of tens of nanometers precipitating at the B2 grain boundaries. During elevated-temperature fracturing, cracks propagated quickly along the interface between the thin-shell O phase and B2 phase, leading to embrittlement of the B2 grain boundary. The precipitation of many fine granular O or α 2 phases at the B2 grain boundaries can inhibit the precipitation of the thin-shell O phase and hinder the propagation of cracks along the grain boundaries. Therefore, the microstructure of this alloy should be controlled to precipitate many fine granular O or α 2 phases to occupy the B2 grain boundaries and inhibit its elevated-temperature embrittlement.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Selective laser melting of Ti–22Al–25Nb intermetallic: significant effects of hatch distance on microstructural features and mechanical properties10.1016/j.jmatprotec.2019.116398 ↗
2. Oxidation behavior of a novel multi-element alloyed Ti2AlNb-based alloy in temperature range of 650–850 °C10.1007/s12598-018-1101-3 ↗
3. Microstructure control and mechanical properties from isothermal forging and heat treatment of Ti–22Al–25Nb (at.%) orthorhombic alloy10.1016/j.intermet.2014.07.011 ↗
4. Microstructure and low cycle fatigue of a Ti2AlNb-based lightweight alloy10.1016/j.jmst.2020.01.032 ↗
5. Strain rate sensitivity of Ti-22Al-25Nb (at%) alloy during high temperature deformation10.1016/j.msea.2017.10.112 ↗
6. Effect of initial microstructures on hot deformation behavior and workability of Ti2AlNb-based alloy10.3390/met8060382 ↗
7. Fabricating Ti2AlNb sheet with high tensile strength and good ductility by hot packed rolling the spark plasma sintered pre-alloyed powder10.1016/j.msea.2020.140392 ↗
8. Selective laser melting enabled additive manufacturing of Ti–22Al–25Nb intermetallic: excellent combination of strength and ductility, and unique microstructural features associated10.1016/j.actamat.2019.05.008 ↗
9. Development of the re-entry spectrometer RESPECT for the ESA capsule EXPERT10.1016/j.actaastro.2008.07.024 ↗
10. Numerical prediction of aerothermodynamic effects on a re-entry vehicle body flap configuration10.1016/j.actaastro.2009.01.069 ↗
11. Elastic and thermodynamic properties of the Ti2AlNb orthorhombic phase from first-principles calculations10.1002/pssb.201600634 ↗
12. Investigation of the phase transformations in Ti-22Al-25Nb alloy10.1016/j.matchar.2016.02.011 ↗
13. Thermal stability and mechanical properties of Ti–22Al–25Nb alloy with different initial microstructures10.1016/j.jallcom.2020.155794 ↗
14. First-principles investigation on the atomic structure, stability and electronic property of O(001)/132(110) interface in Ti2AlNb alloys10.1016/j.jallcom.2019.152734 ↗
15. First-principles investigation on stability and oxygen adsorption behavior of a O/B2 interface in Ti2AlNb alloys10.1016/j.jallcom.2019.152926 ↗
16. Orthorhombic precipitate variant selection in a Ti2AlNb based alloy10.1016/j.matdes.2018.08.011 ↗
17. Constitutive behavior and hot workability of a hot isostatic pressed Ti-22Al-25Nb alloy during hot compression10.1007/s11665-019-04453-w ↗
18. Improved superplasticity and microstructural evolution of Ti2AlNb alloy sheet during electrically assisted superplastic gas bulging10.1007/s00170-018-2431-x ↗
19. B2 grain growth and particle pinning effect of Ti-22Al-25Nb orthorhombic intermetallic alloy during heating process10.1016/j.intermet.2012.04.021 ↗
20. Hydrogen-induced improvement of the cylindrical drawing properties of a Ti-22Al-25Nb Alloy10.1002/adem.201600621 ↗
21. Effect of the primary O phase on thermal deformation behavior of a Ti2AlNb-based alloy10.1016/j.jallcom.2020.156458 ↗
22. Deformation behavior and dynamic recrystallization of Ti–22Al–25Nb alloy at 750–990 °C
23. Formation of diverse B2+O structure and hardness of Mo-modified Ti-22Al-25Nb alloys upon cooling10.1016/j.vacuum.2019.04.034 ↗
24. Anti-correlation between solution strengthening and precipitation strengthening in lamellar O microstructures of a Ti2AlNb based alloy10.1016/j.jallcom.2020.156470 ↗
25. Selective Laser Melting of Ti2AlNb-based intermetallic alloy using elemental powders: effect of process parameters and post-treatment on microstructure, composition, and properties10.1016/j.intermet.2019.106554 ↗
26. Microstructures and tensile properties of Ti2AlNb and Mo-modified Ti2AlNb alloys fabricated by hot isostatic pressing10.1016/j.msea.2020.139043 ↗
27. Formation and temporal evolution of modulated structure in high Nb-containing lamellar γ-TiAl alloy10.1016/j.actamat.2018.11.041 ↗
28. High-resolution electron microscopy characterization of modulated structure in high Nb-containing lamellar γ-TiAl alloy10.1016/j.actamat.2017.11.016 ↗
29. Tensile behavior and deformation mechanism for Ti–22Al–25Nb alloy with lamellar O microstructures10.1016/j.msea.2020.140492 ↗
30. Plastic deformation mechanism and interaction of B2, α2, and O phases in Ti–22Al–25Nb alloy at room temperature10.1016/j.ijplas.2018.09.004 ↗
31. High-temperature deformation behavior of the extruded Ti-22Al-25Nb alloy fabricated by powder metallurgy10.1016/j.matchar.2018.01.019 ↗
32. Dynamic spheroidisation behaviour of the lamellar Ti–22Al–25Nb alloy during hot compression10.1080/02670836.2017.1415013 ↗
33. Quasi cleavage fracture of the bimodal size lamellar O phase microstructure of a Ti2AlNb based alloy10.1016/j.jallcom.2019.05.157 ↗
34. Microstructure evolution, B2 grain growth kinetics and fracture behaviour of a powder metallurgy Ti-22Al-25Nb alloy fabricated by spark plasma sintering10.1016/j.msea.2018.05.110 ↗
35. Microstructure, tensile, and creep behaviors of Ti-22Al-25Nb (at.%) orthorhombic alloy with equiaxed microstructure10.3390/ma11071244 ↗
36. In situ investigation of the tensile deformation of laser welded Ti2AlNb joints10.1016/j.matchar.2016.11.009 ↗
37. Tensile behavior of Ti-22Al-24Nb-0.5Mo in the range 25–650°C10.1016/j.msea.2016.10.047 ↗
38. Characterization of the prior particle boundaries in a powder metallurgy Ti2AlNb alloy10.1016/j.jmst.2019.04.036 ↗
39. Hot Deformation Behavior, Dynamic recrystallization, and texture evolution of Ti-22Al-25Nb alloy10.1002/adem.201700587 ↗
40. Deformation behavior of Ti2AlNb-based alloy during dynamic compression10.1002/adem.201800281 ↗
41. Hot deformation behavior and processing map of a powder metallurgy Ti-22Al-25Nb alloy10.1016/j.jallcom.2014.02.116 ↗
42. The formation mechanism of tear strips on stretched Ti-22Al-25Nb alloy sheets10.1038/s41598-017-01889-9 ↗
43. Morphology and quantitative analysis of O phase during heat treatment of hot-deformed Ti2AlNb-based alloy10.1007/s12613-018-1671-y ↗
44. The role of complexions in metallic nano-grain stability and deformation10.1016/j.cossms.2016.05.005 ↗
45. Effect of compositional changes of laves phase precipitate on grain boundary embrittlement in long-term annealed 9 pct Cr ferritic steel10.1007/s11661-018-4782-1 ↗
46. Fabricating Ti2AlNb sheet with tensile strength higher than 1500MPa by hot packed rolling spark-plasma-sintered pre-alloyed Ti2AlNb powder at the B2 + O phase field10.1016/j.jallcom.2021.160110 ↗
47. A first principles study of Ti2AlNb intermetallic10.1016/j.ssc.2014.12.002 ↗