Intragranular void formation in shock-spalled tantalum: Mechanisms and governing factors
Source abstract
Abstract
Abstract Intragranular void formation in polycrystalline tantalum is investigated with plate impact experiments and molecular dynamics simulations, as regards its mechanisms and governing factors: grain boundary (GB) misorientation, grain orientation, grain size and shock pressure. Free-surface velocity history measurements are performed to obtain spall strength. Electron backscatter diffraction characterizations are used to obtain spatial distribution of voids, GB misorientation, and grain orientation associated with twins and intragranular voids. Intragranular voids are smaller in size but larger in number than intergranular voids, and nucleate in the GB vicinities. Smaller grains are favorable for the formation of intergranular and intragranular voids. At higher shock pressure, intragranular voids increase in fraction and tend to distribute at grain centers. Deformation twinning depends on grain orientation and prefers to form at high-angle GBs. However, intragranular voids have negligible dependence on grain orientation and favor medium-angle GBs, and the preference is enhanced slightly with increasing impact velocity and decreasing grain size. The simulations show GB-induced multiple-slip, slip-slip intersections and strain localizations act as the prerequisites to intragranular void formation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-pressure geophysics and materials · Microstructure and mechanical properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Antoun · 2003
2. Spall behavior of aluminum with varying microstructures
3. Dynamic failure of solids10.1016/0370-1573(87)90049-4 ↗
4. Spall fracture: methodological aspects, mechanisms and governing factors10.1007/s10704-009-9438-0 ↗
5. Effects of structural anisotropy on deformation and damage of a duplex stainless steel under high strain rate loading10.1016/j.msea.2017.08.091 ↗
6. Shock wave response of a zirconium-based bulk metallic glass and its composite10.1063/1.1485300 ↗
7. Spall damage of a mild carbon steel: effects of peak stress, strain rate and pulse duration10.1016/j.msea.2016.02.080 ↗
8. Anisotropic shock response of columnar nanocrystalline Cu10.1063/1.3437654 ↗
9. Meyers · 1994
10. Influence of grain size on the tensile response of aluminum under plate-impact loading10.1063/1.2798497 ↗
11. Effects of grain size and boundary structure on the dynamic tensile response of copper10.1063/1.3607294 ↗
12. The spall strength and hugoniot elastic limit of tantalum with various grain size
13. Shock wave loading and spallation of copper bicrystals with asymmetric Σ3<110> tilt grain boundaries10.1063/1.3506707 ↗
14. Effect of loading direction on grain boundary failure under shock loading10.1016/j.actamat.2013.11.026 ↗
15. Simulation of tantalum nanocrystals under shock-wave loading: dislocations and twinning
16. Effect of crystalline structure on intergranular failure during shock loading10.1007/s11837-013-0798-6 ↗
17. The influence of shock-loading path on the spallation response of Ta
18. Influence of sweeping detonation-wave loading on shock hardening and damage evolution during spallation loading in tantalum
19. Spall damage of copper under supported and decaying shock loading10.1063/1.3271414 ↗
20. Orientation dependence of void formation and substructure deformation in a spalled copper bicrystal10.1016/j.scriptamat.2011.09.015 ↗
21. Laser compression of monocrystalline tantalum10.1016/j.actamat.2012.08.026 ↗
22. Shock compression and spallation of single crystal tantalum
23. Orientation dependence of shock-induced twinning and substructures in a copper bicrystal10.1016/j.actamat.2009.09.033 ↗
24. Loading-path dependent deformation of nanocrystalline ta under single-and double-shock, and quasi-isentropic compression10.1063/1.4978359 ↗
25. Nucleation and growth of damage in polycrystalline aluminum under dynamic tensile loading10.1063/1.4914919 ↗
26. Influence of boundary structure and near neighbor crystallographic orientation on the dynamic damage evolution during shock loading10.1080/14786435.2012.734638 ↗
27. Effect of grain boundary structure on plastic deformation during shock compression using molecular dynamics
28. Statistics of weak grain boundaries for spall damage in polycrystalline copper10.1016/j.scriptamat.2010.08.003 ↗
29. Microstructural effects on damage nucleation in shock-loaded polycrystalline copper10.1007/s11661-014-2482-z ↗
30. Interactive effects of shock loading parameters on the substructure and mechanical properties of nickel and stainless steel10.1016/0025-5416(79)90158-7 ↗
31. Dynamic fracture of C/SiC composites under high strain-rate loading: microstructures and mechanisms10.1016/j.carbon.2015.05.015 ↗
32. Dynamic fracture of carbon nanotube/epoxy composites under high strain-rate loading10.1016/j.compositesa.2014.10.001 ↗
33. Characterization of incipient spall damage in shocked copper multicrystals10.1177/1056789508097550 ↗
34. Micromechanics of spall and damage in tantalum10.1016/0924-0136(96)02340-0 ↗
35. Precursor decay anomaly in single-crystal lithium fluoride10.1063/1.370563 ↗
36. The effect of shock-wave profile on dynamic brittle failure10.1063/1.4794002 ↗
37. Growth and collapse of nanovoids in tantalum monocrystals10.1016/j.actamat.2010.11.001 ↗
38. Growth and collapse of nanovoids in tantalum monocrystals loaded at high strain rate
39. Deformation twinning in explosively-driven tantalum10.1016/j.msea.2012.06.071 ↗
40. Papoulis · 2002
41. Shock-induced plasticity in tantalum single crystals: interatomic potentials and large-scale molecular-dynamics simulations10.1103/PhysRevB.88.134101 ↗
42. Large-scale molecular dynamics simulations of shock induced plasticity in tantalum single crystals
43. Grain boundary orientation effects on deformation of Ta bicrystal nanopillars under high strain-rate compression
44. Plastic deformation in nanoindentation of tantalum: a new mechanism for prismatic loop formation10.1016/j.actamat.2014.06.058 ↗
45. Equations of state of six metals above 94 GPa10.1103/PhysRevB.70.094112 ↗
46. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
47. Dowling · 1998
48. Meyers · 2009
49. Void initiation in fcc metals: effect of loading orientation and nanocrystalline effects10.1016/j.actamat.2010.04.043 ↗
50. Effect of microstructural length scales on spall behavior of copper10.1007/s11661-004-0212-7 ↗
51. Submicrosecond strength of ultrafine-grained materials10.3103/S0025654410040114 ↗
52. Resistance to dynamic deformation and fracture of tantalum with different grain and defect structures10.1134/S1063783412040233 ↗
53. Unusual behaviour of usual materials in shock waves
54. Plasticity induced by shock waves in nonequilibrium molecular-dynamics simulations10.1126/science.280.5372.2085 ↗
55. Modelling of nucleation and void growth in dynamic pressure loading, application to spall test on tantalum10.1007/s10704-006-0070-y ↗