Breakdown of the Hall-Petch relationship in extremely fine nanograined body-centered cubic Mo alloys
Source abstract
Abstract
Abstract Mechanical properties and deformation behavior have been studied in face-centered cubic (fcc) metals with extremely fine grain sizes, even below about 20 nm, but this range is rarely studied in the body-centered cubic (bcc) metals. Here, we study the hardness and deformation behavior of bcc Mo(O) alloys with grain sizes from 120 to 4 nm, covering the range of classical Hall-Petch behavior as well as the regime where that scaling law breaks down, between about 11 and 4 nm. A hardness as high as 17.3 GPa was achieved at the strongest grain size of 11 nm, and the breakdown at smaller grain sizes is associated with a number of changes in behavior: an inflection in activation volume (associated with a change in rate dependence of deformation) and increasing shear localization. At coarser grain sizes this is associated with shear offsets at grain boundaries, pointing to an increasing prevalence of intergranular deformation (by sliding or grain rotation). At finer grain sizes localization is associated with the formation of large shear bands at scales far greater than the grain size. These behaviors are suggestive of a crossover from crystal-like to glass-like deformation behaviors at the finest grain sizes, consistent with the increasing fraction of disordered regions in the structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced Materials Characterization Techniques · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
2. Dual-phase nanostructuring as a route to high-strength magnesium alloys10.1038/nature21691 ↗
3. Grain boundary stability governs hardening and softening in extremely fine nanograined metals10.1126/science.aal5166 ↗
4. The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni10.1016/S1359-6454(02)00427-5 ↗
5. Tailoring and patterning the grain size of nanocrystalline alloys10.1016/j.actamat.2006.08.032 ↗
6. The relationship between hardness and abrasive wear resistance of electrodeposited nanocrystalline Ni-P coatings10.1016/S1359-6462(02)00633-4 ↗
7. Plastic deformation induced hexagonal-close-packed nickel nano-grains10.1016/j.scriptamat.2019.04.024 ↗
8. Grain rotation mediated by grain boundary dislocations in nanocrystalline platinum10.1038/ncomms5402 ↗
9. In situ TEM observations of fast grain-boundary motion in stressed nanocrystalline aluminum films10.1016/j.actamat.2008.03.032 ↗
10. Grain-size dependent mechanical behavior of nanocrystalline metals10.1016/j.msea.2015.07.075 ↗
11. Grain-boundary strengthening in nanocrystalline chromium and the Hall-Petch coefficient of body-centered cubic metals10.1016/j.scriptamat.2012.09.025 ↗
12. Outstanding radiation resistance of tungsten-based high-entropy alloys10.1126/sciadv.aav2002 ↗
13. Recent advances in aerospace refractory metal alloys10.1179/imr.1988.33.1.131 ↗
14. Tensile properties of nanocrystalline tantalum from molecular dynamics simulations10.1016/j.actamat.2008.03.025 ↗
15. Inverse Hall–Petch relationship in nanocrystalline tantalum10.1016/j.msea.2013.05.024 ↗
16. Molecular dynamics simulation study of the effect of grain size on the deformation behavior of nanocrystalline body-centered cubic iron10.1016/j.scriptamat.2010.11.019 ↗
17. Activation analysis of deformation in evaporated molybdenum thin films10.1088/0022-3727/36/7/318 ↗
18. Microstructure and mechanical properties of super-strong nanocrystalline tungsten processed by high-pressure torsion10.1016/j.actamat.2006.05.005 ↗
19. Nanostructurization of Nb by high-pressure torsion in liquid nitrogen and the thermal stability of the structure obtained10.1134/S0031918X1203009X ↗
20. Influence of oxygen on the glass formation of Mo-O binary alloys10.1016/j.jnoncrysol.2018.07.064 ↗
21. Study on the reduction of molybdenum dioxide by hydrogen10.2320/matertrans.MER2008103 ↗
22. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
23. The Hall-Petch breakdown in nanocrystalline metals: a crossover to glass-like deformation10.1016/j.actamat.2007.07.020 ↗
24. Influence of indenter geometry on the eformation behavior of Zr60Cu30Al10 bulk metallic glass during nanoindentation10.2320/matertrans.MJ200752 ↗
25. Variation of strain rate sensitivity with grain size in Cr and other body-centred cubic metals10.1088/0022-3727/47/17/175303 ↗
26. Nanotwinned metal MEMS films with unprecedented strength and stability10.1126/sciadv.1700685 ↗
27. Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals10.1016/j.msea.2004.03.064 ↗
28. Solid-solution strengthening by oxygen in Nb-Ta and Nb-Mo single crystals10.1002/1521-396X(200106)185:2<357::AID-PSSA357>3.0.CO;2-9 ↗
29. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility10.1038/nmat3544 ↗
30. Grain size effect on radiation tolerance of nanocrystalline Mo10.1016/j.scriptamat.2016.06.007 ↗
31. Hall-Petch breakdown manifested in abrasive wear resistance of nanocrystalline nickel10.1016/S1359-6462(02)00062-3 ↗
32. Softening of nanocrystalline metals at very small grain sizes10.1038/35328 ↗
33. A maximum in the strength of nanocrystalline copper10.1126/science.1086636 ↗
34. Demonstration of an inverse Hall-Petch relationship in electrodeposited nanocrystalline Ni-W alloys through tensile testing10.1016/j.scriptamat.2006.03.047 ↗
35. Nanomechanics of Hall-Petch relationship in nanocrystalline materials10.1016/j.pmatsci.2009.03.008 ↗
36. In situ observation of stress induced grain boundary migration in nanocrystalline gold10.1016/j.scriptamat.2017.03.003 ↗
37. Experimental Observations of stress-driven grain boundary migration10.1126/science.1178226 ↗
38. Grain boundary migration during room temperature deformation of nanocrystalline Ni10.1016/j.scriptamat.2006.06.032 ↗
39. Experimental evidence for grain-boundary sliding in ultrafine-grained aluminum processed by severe plastic deformation10.1002/adma.200501232 ↗
40. Size-induced weakening and grain boundary-assisted deformation in 60 nm grained Ni nanopillars10.1016/j.scriptamat.2010.09.010 ↗
41. Effects of nanocrystalline and ultrafine grain sizes on constitutive behavior and shear bands in iron10.1016/S1359-6454(03)00169-1 ↗
42. Microstructure and mechanical properties at different length scales and strain rates of nanocrystalline tantalum produced by high-pressure torsion10.1016/j.actamat.2010.12.042 ↗
43. Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression
44. Microstructure-dependent deformation behavior of bcc-metals-indentation size effect and strain rate sensitivity10.1080/14786435.2014.982741 ↗
45. Adiabatic shear banding in ultrafine-grained Fe processed by severe plastic deformation10.1016/j.actamat.2003.12.025 ↗
46. Grain-size dependence of plastic deformation in nanocrystalline Fe10.1063/1.1569035 ↗
47. Nano-structured vanadium: processing and mechanical properties under quasi-static and dynamic compression10.1016/j.scriptamat.2003.10.010 ↗
48. Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass10.1016/S0966-9795(02)00137-1 ↗
49. Grain boundary relaxation strengthening of nanocrystalline Ni-W alloys10.1557/jmr.2012.55 ↗
50. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
51. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
52. Strength asymmetry in nanocrystalline metals under multiaxial loading10.1016/j.actamat.2005.03.023 ↗
53. Hall-Petch relation in nanocrystalline solids10.1016/0956-716X(91)90256-Z ↗
54. Atom probe study of grain boundary segregation in technically pure molybdenum10.1016/j.matchar.2013.11.001 ↗
55. Grain boundary segregation and intergranular fracture in molybdenum10.1098/rspa.1980.0043 ↗