Characteristics of ferroelastic domains and thermal transport limits in HfO2 alloying YTaO4 ceramics
Source abstract
Abstract
Low thermal conductivity and a ferroelastic tetragonal-monoclinic phase transition are essential for the use of YTaO 4 in thermal barrier coatings. The phonon scattering mechanism of HfO 2 alloying YTaO 4 is elucidated via the analysis of microstructural characteristics, and a limit thermal conductivity (1.3 W·m −1·K −1 ) is achieved. Furthermore, a revised model is developed to successfully derive high-temperature phonon thermal conductivity, showing a decrease in the phonon scattering coefficient as strain field fluctuations decrease. This proves that the phonon scattering coefficient is temperature dependent. Atomic weight disorder plays a significant role in thermal conductivity reduction, whereas HfO 2 alloying enhances lattice symmetry and weakens the phonon scattering, and thus mitigates thermal conductivity reduction. Additionally, domain boundary width and spacing mismatch between neighboring domains cause the scattering of phonons and further reduce the thermal conductivity. Finally, evidence of a diffusive domain boundary validates that tetragonal-monoclinic transition is a second-order process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal properties of materials · High-Temperature Coating Behaviors · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
2. Calcia-magnesia-alumino-silicate (CMAS)-induced degradation and failure of air plasma sprayed yttria-stabilized zirconia thermal barrier coatings10.1016/j.actamat.2015.12.044 ↗
3. Low thermal conductivity in high-entropy rare-earth pyrosilicate solid-solutions for thermal environmental barrier coatings10.1016/j.scriptamat.2020.09.008 ↗
4. The tetragonal-monoclinic, ferroelastic transformation in yttrium tantalate and effect of zirconia alloying10.1016/j.actamat.2014.01.054 ↗
5. Thermal conductivity of single- and multi-phase compositions in the ZrO2-Y2O3-Ta2O5 system10.1016/j.jeurceramsoc.2014.03.013 ↗
6. On the yttrium tantalate-zirconia phase diagram10.1016/j.jeurceramsoc.2018.03.012 ↗
7. Multicomponent high-entropy Zr-Y-Yb-Ta-Nb-O oxides for next-generation thermal barrier coating applications10.1111/jace.18053 ↗
8. Phase equilibria in the ZrO2-YO1.5-TaO2.5 system at 1500 ˚C10.1016/j.jeurceramsoc.2017.06.031 ↗
9. ZrO2-doped YTaO4 as potential CMAS-resistant materials for thermal barrier coatings application10.1111/jace.17976 ↗
10. Thermal expansion performance and intrinsic lattice thermal conductivity of ferroelastic RETaO4 ceramics10.1111/jace.16328 ↗
11. Crystallography and substitution patterns in the ZrO2-YTaO4 system
12. First-principles calculations of the high-temperature phase transformation in yttrium tantalate10.1103/PhysRevB.90.094102 ↗
13. Ferroelastic domain identification and toughening mechanism for yttrium tantalate-zirconium oxide10.1016/j.jmst.2022.04.007 ↗
14. Thermal and mechanical properties of ferroelastic RENbO4 (RE = Nd, Sm, Gd, Dy, Er, Yb) for thermal barrier coatings10.1016/j.scriptamat.2020.01.026 ↗
15. In situ measurements of the high-temperature mechanical properties of ZrO2-doped YTaO4 ceramic by three-point bending combined with a digital image correlation method10.1016/j.ceramint.2021.11.277 ↗
16. Influence of zirconia alloying on the thermophysical and mechanical properties of YTaO4 ceramics10.1016/j.ceramint.2019.07.187 ↗
17. Influence of HfO2 alloying effect on microstructure and thermal conductivity of HoTaO4 ceramics10.1007/s40145-019-0336-2 ↗
18. Thermal conductivity of yttria-stabilized zirconia-hafnia solid solutions10.1016/j.actamat.2006.06.038 ↗
19. Effect of point defects on the thermal transport properties of (LaxGd1-x)2Zr2O7: experiment and theoretical model10.1103/PhysRevB.74.144109 ↗
20. Influence of B site substituent Ti on the structure and thermophysical properties of A2B2O7-type pyrochlore Gd2Zr2O710.1016/j.actamat.2009.06.040 ↗
21. Defect-mediated multiple-enhancement of phonon scattering and decrement of thermal conductivity in (YxYb1-x)2SiO5 solid solution10.1016/j.actamat.2017.10.064 ↗
22. High-temperature phonon thermal conductivity of nanostructures10.1103/PhysRevB.66.134203 ↗
23. Effect of point imperfections on lattice thermal conductivity10.1103/PhysRev.120.1149 ↗
24. Ultralow lattice thermal conductivity and enhanced power generation efficiency realized in Bi2Te2.7Se0.3/Bi2S3 nanocomposites10.1016/j.actamat.2021.117230 ↗
25. High-performance lead-free cubic GeTe-based thermoelectric alloy
26. A simplified method for calculating the Debye temperature from elastic constants
27. Materials selection guidelines for low thermal conductivity thermal barrier coatings10.1016/S0257-8972(02)00593-5 ↗
28. Lower limit to the thermal-conductivity of disordered crystals10.1103/PhysRevB.46.6131 ↗
29. A new estimation method for the intrinsic thermal conductivity of nonmetallic compounds: a case study for MgSiN2, AlN and Si3N4 ceramics10.1016/j.jeurceramsoc.2004.05.003 ↗
30. Nonmetallic crystals with high thermal conductivity10.1016/0022-3697(73)90092-9 ↗
31. Kittle · 1996
32. Thermal conductivity of monazite-type REPO4 (RE = La, Ce, Nd, Sm, Eu, Gd)10.1111/j.1551-2916.2009.03244.x ↗
33. Effect of lattice defects on thermal conductivity of Ti-doped, Y2O3-stabilized ZrO210.1016/j.actamat.2013.05.038 ↗
34. Effective blocking of radiative thermal conductivity in La2Zr2O7/LaPO4 composites for high temperature thermal insulation applications10.1016/j.jeurceramsoc.2016.03.010 ↗
35. Exploration of the low thermal conductivities of γ-Y2Si2O7, β-Y2Si2O7, β-Yb2Si2O7, and β-Lu2Si2O7 as novel environmental barrier coating candidates10.1016/j.jeurceramsoc.2016.04.022 ↗
36. Investigation on thermal transport and structural properties of InFeO3(ZnO)m with modulated layer structures10.1016/j.actamat.2017.07.012 ↗
37. Equiatomic quaternary (Y1/4Ho1/4Er1/4Yb1/4)2SiO5 silicate: a perspective multifunctional thermal and environmental barrier coating material10.1016/j.scriptamat.2019.04.018 ↗
38. (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4: a high-entropy rare-earth phosphate monazite ceramic with low thermal conductivity and good compatibility with Al2O310.1016/j.jmst.2019.08.012 ↗
39. Role and determining factor of substitutional defects on thermal conductivity: a study of La2(Zr1-xBx)2O7 (B = Hf, Ce, 0≤x≤0.5) pyrochlore solid solutions10.1016/j.actamat.2014.01.011 ↗
40. Zn0.1Ca0.1Sr0.4Ba0.4ZrO3: a non-equimolar multicomponent perovskite ceramic with low thermal conductivity10.1016/j.jeurceramsoc.2020.07.054 ↗
41. Application of high-throughput first-principles calculations in ceramic innovation10.1016/j.jmst.2021.01.071 ↗
42. Tailoring the anisotropic mechanical properties of hexagonal M7X3 (M=Fe, Cr, W, Mo; X=C, B) by multialloying10.1016/j.actamat.2019.03.015 ↗
43. Thermodynamic properties of the Yb-Sb system predicted from first-principles calculations10.1016/j.actamat.2021.117169 ↗
44. The scattering of low-frequency lattice waves by static imperfections10.1088/0370-1298/68/12/303 ↗
45. Model for thermal conductivity at low temperatures10.1103/PhysRev.113.1046 ↗
46. Calculated high-temperature elastic constants for zero porosity monoclinic zirconia10.1111/j.1151-2916.1964.tb13120.x ↗
47. Exponential temperature dependence of Young's modulus for several oxides10.1103/PhysRev.122.1754 ↗
48. Grimvall · 1999
49. Charge-induced disorder controls the thermal conductivity of entropy-stabilized oxides10.1002/adma.201805004 ↗
50. Achieved limit thermal conductivity and enhancements of mechanical properties in fluorite RE3NbO7 via entropy engineering10.1007/978-981-16-3492-5 ↗
51. Thermo-mechanical properties of ThO2-doped Y2O3 stabilized ZrO2 for thermal barrier coatings10.1016/j.ceramint.2015.08.137 ↗
52. Thermophysical properties of rare earth barium aluminates10.1111/jace.15504 ↗
53. High-entropy ceramics: present status, challenges, and a look forward10.1007/s40145-021-0477-y ↗
54. High-entropy (Nd0.2Sm0.2Eu0.2Y0.2Yb0.2)4Al2O9 with good high temperature stability, low thermal conductivity, and anisotropic thermal expansivity10.1007/s40145-020-0399-0 ↗
55. Influence of ZrO2 alloying effect on the thermophysical properties of fluorite-type Eu3TaO7 ceramics10.1016/j.scriptamat.2018.03.042 ↗
56. Size disorder as a descriptor for predicting reduced thermal conductivity in medium-and high-entropy pyrochlore oxides10.1016/j.scriptamat.2020.02.011 ↗
57. High-entropy perovskite RETa3O9 ceramics for high-temperature environmental/thermal barrier coatings10.1007/s40145-021-0556-0 ↗
58. Role of disorder and anharmonicity in the thermal conductivity of silicon-germanium alloys: a first-principles study10.1103/PhysRevLett.106.045901 ↗
59. Structural and thermal properties of the monoclinic Lu2SiO5 single crystal: evaluation as a new laser matrix10.1107/S0021889809004269 ↗
60. The Geometry of polyhedral distortion. Prediction relationships for the phosphate group10.1107/S0567740874004560 ↗
61. Quadratic elongation: a quantitative measure of distortion in coordination polyhedra10.1126/science.172.3983.567 ↗
62. Twinning and sequential kinking in lamellar Ti-6Al-4V alloy10.1016/j.actamat.2019.10.010 ↗
63. Deformation induced FCC lamellae and their interaction in commercial pure Ti10.1016/j.scriptamat.2018.11.037 ↗
64. Thermophysical properties of rare-earth stannates: effect of pyrochlore structure10.1016/j.actamat.2012.01.057 ↗
65. Lattice thermal conductivity of minerals at high temperatures10.1029/JB079i005p00703 ↗
66. Thermal conductivity modeling on highly disordered crystalline Y1-xNbxO1.5+x: beyond the phonon scenario10.1063/5.0040546 ↗
67. Thermal conductivity of yttria-zirconia single crystals, determined with spatially resolved infrared thermography10.1111/j.1151-2916.2000.tb01502.x ↗