Dynamic recrystallization in a near β titanium alloy under different deformation modes – Transition and correlation
Source abstract
Abstract
During the thermoforming of TC18 titanium alloy multi-cavity components, different deformation modes always exist and change, such as uniaxial compression (UC), shear-compression deformation (SCD), uniaxial tension (UT) and shear-tension deformation (STD). Dynamic recrystallization (DRX) of β grains occurs during the single-phase field deformation and has a great influence on the performance of components. In this study, the types and mechanisms of DRX in TC18 titanium alloy as well as transition and correlation under different deformation modes are investigated. It is found that discontinuous dynamic recrystallization (DDRX) initiates through grain boundary bulging at a low strain and dominates in different modes of deformation. Continuous dynamic recrystallization (CDRX) initiates at different strains depending on deformation modes, and the mechanisms vary, subgrain rotation within grains and lattice rotation near GBs under UC and STD, while only subgrain rotation under UT, in addition to these two mechanisms, grain fragmentation is also involved under SCD. Secondary dynamic recrystallization (SDRX) only occurs at a high strain under SCD and STD. Deformation modes lead to differences in orientation, slip and rotation of grains, further result in different dislocation density, distribution and accumulation, which contribute to the occurrence and transition of different types of DRX. Meanwhile deformation modes result in differences in the difficulty of GB migration and lattice rotation, ultimately in the initiation and degree of DDRX and CDRX. The shear stress in SCD and STD promotes the occurrence of CDRX. The present results can provide a guidance for obtaining good performance of the titanium alloy components.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. The dynamic responses of lamellar and equiaxed near β-Ti alloys subjected to multi-pass cross rolling10.1016/j.jmst.2019.10.017 ↗
2. Study on bifurcation behavior and morphology of the secondary grain boundary α phase in TC18 titanium alloy10.1016/j.jallcom.2022.163622 ↗
3. A unified model of ductile fracture considering strain rate and temperature under the complex stress states10.1016/j.jmatprotec.2021.117275 ↗
4. Mechanisms of macrozone elimination and grain refinement of near α Ti alloy via the spheroidization of the Widmannst¨atten structure10.1016/j.actamat.2023.119339 ↗
5. A critical assessment of experimental investigation of dynamic recrystallization of metallic materials10.1016/j.matdes.2020.108873 ↗
6. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
7. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
8. Unique high-temperature deformation dominated by grain boundary sliding in heterogeneous necklace structure formed by dynamic recrystallization in HfNbTaTiZr BCC refractory high entropy alloy10.1016/j.actamat.2019.11.001 ↗
9. Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method10.1016/j.ijplas.2018.03.002 ↗
10. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
11. Micromechanical response of pure magnesium at different strain rate and temperature conditions: twin to slip and slip to twin transitions10.1016/j.actamat.2022.118528 ↗
12. Relationship between β→α dynamic transformation and dynamic recrystallization under thermomechanical coupling in Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1016/j.jmst.2023.05.061 ↗
13. Transition of dynamic recrystallization mechanisms of as-cast AZ31 Mg alloys during hot compression10.1016/j.ijplas.2018.07.017 ↗
14. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion10.1016/j.actamat.2018.07.014 ↗
15. Hot deformation and recrystallization behavior of a new nickel-base superalloy for ultra-supercritical applications10.1016/j.jmrt.2022.06.141 ↗
16. Microstructural evolution and dynamic recrystallization mechanism of a heavily-alloyed Ni-based superalloy during hot extrusion10.1016/j.jmrt.2023.02.118 ↗
17. High-temperature deformation behavior and recrystallization mechanism of a near beta titanium alloy Ti-55511 in β phase region10.1016/j.msea.2022.143335 ↗
18. High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy
19. Evolutions of the microstructures and mechanical properties of TC18 titanium alloy processed by hot-rolling in β single-phase region10.1016/j.jmrt.2023.08.268 ↗
20. Influence of mode of deformation on microstructural heterogeneities in Ni subjected to large strain deformation10.1080/09500839.2015.1085129 ↗
21. Recrystallisation following non-proportional straining in aluminium10.1179/mst.1995.11.11.1104 ↗
22. Annealing response of AA5182 deformed in plane strain and equibiaxial strain paths
23. Influence of state of stress on dynamic recrystallization in a titanium-modified austenitic stainless steel10.1007/s11661-011-1015-2 ↗
24. Continuous dynamic recrystallization in a superplastic 7075 aluminum alloy10.2320/matertrans.43.2400 ↗
25. Thermal stability of ECAP processed pure copper10.1016/j.msea.2007.01.042 ↗
26. Deformation mode dependent mechanism and kinetics of dynamic recrystallization in hot working of titanium alloy10.1016/j.msea.2019.138804 ↗
27. Effect of deformation mode and grain orientation on misorientation development in a body-centered cubic steel10.1016/j.actamat.2007.05.014 ↗
28. Effect of neighboring grain orientation on strain localization in slip bands in HCP materials10.1016/j.ijplas.2021.103026 ↗
29. Effect of grain orientation on microstructures during hot deformation of AA3104 Aluminium alloy by plane strain compression10.1016/S1359-6454(01)00009-X ↗
30. Importance of deformation-induced local orientation distributions for nucleation of recrystallisation10.1016/j.actamat.2021.116808 ↗
31. Modification of the shear-compression specimen for large strain testing10.1007/s11340-015-0057-6 ↗
32. A shear-tension specimen for large strain testing10.1007/s11340-015-0106-1 ↗
33. Texture evolution associated with the preferential recrystallization during annealing process in a hot-rolled near β titanium alloy10.1016/j.jmrt.2021.02.062 ↗
34. A review of microstructure and texture evolution during plastic deformation and heat treatment of β-Ti alloys10.1016/j.jallcom.2021.163242 ↗
35. Rollett · 2004
36. Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloy10.1016/j.actamat.2019.04.018 ↗
37. Microstructure evolution, lattice rotation retardation and grain orientation fragmentation in commercial purity aluminium deformed by high pressure torsion10.1016/j.jmrt.2020.04.056 ↗
38. Effect of irradiation-induced strength anisotropy on the reorientation trajectories and fragmentation behavior of grains in BCC polycrystals under tensile loading10.1016/j.actamat.2023.119503 ↗
39. DDRX and CDRX of an as-cast nickel-based superalloy during hot compression at γ′ sub-/super-solvus temperatures10.1016/j.jallcom.2019.06.202 ↗
40. Strain-induced grain boundary migration and grain rotation in polycrystalline metals: atomic-and meso-scale phase field simulations10.1016/j.commatsci.2023.112531 ↗
41. Thermal deformation behavior and microstructure evolution of GH4169 superalloy under the shear-compression deformation conditions10.1016/j.matdes.2021.110195 ↗
42. Combined deformation behavior and microstructure evolution of 7050 aluminum alloy during hot shear-compression deformation10.1016/j.matchar.2016.10.025 ↗
43. Mechanical behaviors and texture evolution of CoCrFeNi high-entropy alloy under shear-tension deformation10.1016/j.jallcom.2019.152479 ↗
44. The nature and motion of deformation-induced dislocations in SrTiO3: insights from atomistic simulations10.1016/j.actamat.2022.118404 ↗
45. In-situ EBSD study of the active slip systems and lattice rotation behavior of surface grains in aluminum alloy during tensile deformation10.1016/j.msea.2013.05.046 ↗
46. Heterogeneous microstructural evolution during hydrodynamic penetration of a high-velocity copper microparticle impacting copper
47. Systematic analysis of the softening mechanism and texture evolution of Ti–6Cr–5Mo–5V–4Al alloy during hot compression in α+β phase region10.1016/j.msea.2022.143571 ↗
48. Dislocation slips assisted grain rotation and specific texture evolution in a CoCrNi medium entropy alloy10.1016/j.msea.2023.145897 ↗
49. Disparity in recrystallization of α- & γ-fibers and its impact on Cube texture formation in non-oriented electrical steel10.1016/j.actamat.2021.117141 ↗
50. Influence of the mode of deformation on recrystallisation kinetics in Nickel through experiments, theory and phase field model10.1080/14786435.2017.1370146 ↗
51. Exploring grain boundary energy landscapes with the activation-relaxation technique10.1016/j.scriptamat.2013.02.038 ↗
52. Deformation substructure development in AlXCoCrFeNi (X = 0, 0.3) high entropy alloy under different influencing factors10.1016/j.jallcom.2021.162196 ↗