Recrystallization of coherent nanolamellar structures in Ti48Al2Cr2Nb intermetallic alloy
Source abstract
Abstract
This study is about the recrystallization of a nanolamellar structure in Ti48Al2Cr2Nb intermetallic alloy. This is a specific case of recrystallization, the driving force comes only from the elastic coherency strain and the interfacial energy. Using an estimation of the stored energy, it is shown that the driving force is sufficient for recrystallization to occur without any prior plastic deformation. Two kinds of nucleation sites are identified: at the border between nanolamellar colonies and inside the nanolamellar colonies. For the former, it is proposed that a nucleus preexists. It is formed by local plastic relaxation of strong internal stresses at the tip of the lamellae and by subsequent recovery. For the latter, it is asserted that a nucleus is generated with a new orientation, by formation of a new interface and its migration. These two different mechanisms of nucleation are discussed based on microscopy observations and driving force estimation. In both cases growth proceeds by strain induced grain boundary migration (SIGBM) assisted by successive (111) twinning.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Analysis of the minimum creep rates of TiAl alloys10.1016/S0921-5093(03)00589-6 ↗
2. Effect of boron addition on tensile ductility in lamellar TiAl alloys10.1016/S0966-9795(02)00087-0 ↗
3. Interplay between α(Ti) nucleation and growth during peritectic solidification investigated by phase-field simulations10.1088/0953-8984/21/46/464104 ↗
4. Grain refinement by low boron additions in niobium-rich TiAl-based alloys10.1016/j.intermet.2008.04.019 ↗
5. Alloy design concepts for refined gamma titanium aluminide based alloys10.1016/j.intermet.2006.05.003 ↗
6. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
7. Crystallography and phase transformation mechanisms in TiAl-based alloys_A synthesis10.1016/j.intermet.2009.05.013 ↗
8. Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy10.1016/j.intermet.2013.09.010 ↗
9. Texture and microstructure evolution during tempering of γ-massive phase in a TiAl-based alloy10.1016/j.intermet.2009.05.001 ↗
10. Variant selection during nucleation and growth of γ-massive phase in TiAl-based intermetallic alloys10.1016/j.actamat.2008.11.012 ↗
11. Mismatch-induced recrystallization of giant magneto-resistance multilayer systems10.1063/1.2163567 ↗
12. PM TiAl alloys: the sky's the limit10.1016/S0026-0657(00)87337-3 ↗
13. Polycrystal orientation maps from TEM10.1016/S0304-3991(02)00435-7 ↗
14. Evolution of metastable α phase during heating of Ti48Al2Cr2Nb intermetallic alloy10.1016/j.jallcom.2015.09.179 ↗
15. A quantitative TEM analysis of the lamellar microstructure in TiAl based alloys10.1016/S1359-6454(96)00398-9 ↗
16. Multiscale γ variant selection in a quaternary near-γ Ti–Al alloy10.1080/14786430600669832 ↗
17. EBSD characterisation of massive γ nucleation and growth in a TiAl-based alloy10.1016/j.intermet.2005.08.010 ↗
18. Interfacial energies in two-phase TiAl-Ti3Al alloy10.1016/S1359-6462(97)00313-8 ↗
19. Coherency and loss of coherency in lamellar Ti–Al10.1016/S0966-9795(98)00034-X ↗
20. Effects of lamellar boundary structural change on lamellar size hardening in TiAl alloy10.1016/j.actamat.2004.07.029 ↗
21. Newly developed TiAl base alloys for lightweight components in jet engines and internal combustion engines-Properties, production, application10.1002/mawe.200600067 ↗
22. Phase transformation effects during hip of TiAl10.1016/0956-7151(92)90107-P ↗
23. Interaction between phase transformation and compression sintering in a TiAl-based intermetallic alloy
24. Gottstein · 2004
25. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
26. Effect of microstructural stability on creep behavior of 47XD TiAl alloys with fine-grained fully lamellar structure10.1016/j.scriptamat.2004.08.027 ↗
27. Microstructural stability and creep behavior of a lamellar γ-TiAl based alloy with extremely fine lamellar spacing10.1016/S0966-9795(02)00021-3 ↗
28. Development of Widmanstätten laths in a near-γ TiAl alloy10.1016/j.actamat.2005.04.007 ↗
29. Features of feathery gamma structure in a near-γ TiAl alloy10.1016/j.actamat.2007.12.056 ↗
30. Strain induced grain boundary migration in high purity aluminum10.1063/1.1699614 ↗
31. Two-dimensional motion of idealized grain boundaries10.1063/1.1722511 ↗
32. A hybrid model for mesoscopic simulation of recrystallization10.1016/S0927-0256(00)00216-0 ↗
33. The effect of thermal exposure on microstructural stability and creep resistance of a two-Phase TiAl/Ti3Al lamellar alloy10.1007/BF02648857 ↗
34. The effects of long-term air exposure on the stability of lamellar TiAl alloys10.1016/S0966-9795(99)00120-X ↗
35. Microstructural instability in a crept fully lamellar TiAl alloy10.1016/S0966-9795(98)00125-3 ↗
36. Novel design concepts for gamma-base titanium aluminide alloys10.1016/S0966-9795(00)00036-4 ↗
37. Humphreys · 2004