journal article·2016-05

FIB-induced dislocations in Al submicron pillars: Annihilation by thermal annealing and effects on deformation behavior

Subin Lee, Jiwon Jeong, Youbin Kim, Seung Min Han, Daniel Kiener, Sang Ho Oh

Acta Materialia· Volume 110
Publisher page

Abstract

Abstract In-situ transmission electron microscopy (TEM) annealing of submicron Al pillars (∼300–450 nm in diameter) fabricated by focused ion beam (FIB) shows that the dislocation loops formed by the high energy Ga+ ion beam impact near the material surface can be removed by annealing at around half of the melting point (Tm). Quantitative analysis of real-time TEM data reveals that the dislocation loops first show a ripening behavior at around 0.4Tm, i.e. larger loops coarsen at the expense of smaller ones. Subsequently, the ripened loops start to shrink and are eventually annihilated at ∼0.5Tm by the diffusion of thermally activated vacancies. Microcompression tests on the as-fabricated and annealed pillars suggest that the FIB-induced defects, particularly dislocation loops, distinctively affect the deformation behavior of submicron Al pillars; while the yield and flow stresses appear unaffected by the annealing, strain bursts are larger and more frequent in the annealed pillars compared to those of as-fabricated samples. In-situ TEM compression revealed that the initial plastic deformation and subsequent plastic flow of Al pillars are significantly altered by the presence of FIB-induced dislocation loops, as they actively respond to the applied stress. We observe that the initial dislocation activity in most FIB-prepared pillars was the glide of FIB-induced dislocation loops. With further straining, the dislocation loops escaped the pillar, leaving slip steps at the pillar surface and/or dislocation debris within the pillar volume via the interaction with other mobile dislocations. The subsequent dislocation slip is mostly localized at these locations, thereby forming large slip steps. Contrarily, in the case of annealed pillars, the deformation was rather homogeneous with the formation of multiple fine slip steps. The present direct TEM observations contribute to the understanding of the nature of FIB-induced defects and reveal their distinct roles in the deformation behaviors of submicron pillars.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Ion-surface interactions and analysis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Sample dimensions influence strength and crystal plasticity10.1126/science.1098993 ↗
2. In situ observation of dislocation nucleation and escape in a submicrometre aluminium single crystal10.1038/nmat2370 ↗
3. Mechanical properties of ultrahigh-strength gold nanowires10.1038/nmat1403 ↗
4. Ultrahigh strength single crystalline nanowhiskers grown by physical vapor deposition10.1021/nl9015107 ↗
5. Comparing the strength of f.c.c. and b.c.c. sub-micrometer pillars: compression experiments and dislocation dynamics simulations10.1016/j.msea.2007.08.093 ↗
6. Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale10.1016/j.actamat.2009.12.022 ↗
7. Size effects on strength and plasticity of vanadium nanopillars10.1016/j.scriptamat.2010.08.011 ↗
8. Plasticity of micrometer-scale single crystals in compression10.1146/annurev-matsci-082908-145422 ↗
9. Plasticity in small-sized metallic systems: intrinsic versus extrinsic size effect10.1016/j.pmatsci.2011.01.005 ↗
10. Surface-controlled dislocation multiplication in metal micropillars10.1073/pnas.0806118105 ↗
11. Source truncation and exhaustion: Insights from quantitative in situ TEM tensile testing10.1021/nl201890s ↗
12. Unravelling the physics of size-dependent dislocation-mediated plasticity10.1038/ncomms6926 ↗
13. Nanoscale gold pillars strengthened through dislocation starvation10.1103/PhysRevB.73.245410 ↗
14. How does radiation damage10.1126/science.1150394 ↗
15. Surface damage formation during ion-beam thinning of samples for transmission electron microscopy10.1016/S0304-3991(00)00096-6 ↗
16. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
17. Effects of focused ion beam induced damage on the plasticity of micropillars10.1103/PhysRevB.80.104104 ↗
18. Effects of focused ion beam milling on the nanomechanical behavior of a molybdenum-alloy single crystal10.1063/1.2784948 ↗
19. Effects of focused ion beam milling on the compressive behavior of directionally solidified micropillars and the nanoindentation response of an electropolished surface10.1016/j.actamat.2008.09.033 ↗
20. FIB damage of Cu and possible consequences for miniaturized mechanical tests10.1016/j.msea.2007.01.046 ↗
21. Mechanical annealing and source-limited deformation in submicrometre-diameter Ni crystals10.1038/nmat2085 ↗
22. Achieving the ideal strength in annealed molybdenum nanopillars10.1016/j.actamat.2010.05.052 ↗
23. Advanced nanomechanics in the TEM: effects of thermal annealing on FIB prepared Cu samples10.1080/14786435.2012.685966 ↗
24. The design of accurate micro-compression experiments10.1016/j.scriptamat.2005.06.043 ↗
25. Effects of initial orientation, sample geometry and friction on anisotropy and crystallographic orientation changes in single crystal microcompression deformation: a crystal plasticity finite element study10.1016/j.actamat.2007.04.023 ↗
26. Giannuyi · 2005
27. Focused ion beam microscopy and micromachining10.1557/mrs2007.62 ↗
28. Ziegler · 1985
29. Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients10.1016/j.actamat.2004.12.031 ↗
30. Microcompression study of Al-Nb nanoscale multilayers10.1557/jmr.2011.414 ↗
31. Study of strain softening behavior of Al-Al3Sc multilayers using microcompression testing10.1016/j.actamat.2009.06.007 ↗
32. Point defect clusters and dislocations in FIB irradiated nanocrystalline aluminum films: an electron tomography and aberration-corrected high-resolution ADF-STEM study10.1017/S143192761101213X ↗
33. Defect accumulation in pure fcc metals in the transient regime: a review10.1016/0022-3115(93)90125-I ↗
34. Measurements of the vacancy formation enthalpy in aluminum using positron annihilation spectroscopy10.1103/PhysRevB.17.3444 ↗
35. Energetics and kinetics of vacancy diffusion and aggregation in shocked aluminium via orbital-free density functional theory10.1039/b705455f ↗
36. Vacancy-formation energies at the (111) surface and in bulk Al, Cu, Ag, and Rh10.1103/PhysRevB.48.1877 ↗
37. Hull · 1984
38. Source-based strengthening of sub-micrometer Al fibers10.1016/j.actamat.2011.11.005 ↗
39. Size effects in Al nanopillars: single crystalline vs. bicrystalline10.1016/j.actamat.2011.03.065 ↗
40. Higher-order gradient effects in micropillar compression10.1016/j.actamat.2012.12.038 ↗
41. Initial dislocation structures in 3-D discrete dislocation dynamics and their influence on microscale plasticity10.1016/j.actamat.2008.12.020 ↗
42. Atomistic simulations of dislocation pinning points in pure face-centered-cubic nanopillars10.1088/0965-0393/20/7/075001 ↗
43. Oxidation-assisted ductility of aluminium nanowires10.1038/ncomms4959 ↗
44. Elastic limit for surface step dislocation nucleation in face-centered cubic metals: Temperature and step height dependence10.1016/j.actamat.2010.04.009 ↗