Understanding of failure mechanisms of the oxide scales formed on nanocrystalline coatings with different Al content during cyclic oxidation
Source abstract
Abstract
Abstract Cyclic oxidation behaviors of three nanocrystalline coatings with phase constitutions of γ/γʹ, single γʹ, and γʹ/β, respectively, tailored by adjusting the Al content, are investigated. The oxide scale on γ/γʹ coating exhibits serious surface rumpling accompanied by frequently cracking at the crests of undulations after 500 cycles at 1100°C. The premature degradation of the coating in microstructure (i.e. γ′ phase dissolution and concurrent grain coarsening), arising from high oxidation rate and low original Al content, not only increases its CTE to introduce larger thermal stress, but also decreases its hardness and elastic modulus, making it susceptible to rumpling and further inducing cracking of oxide scale. Comparatively, benefited from lower oxidation rate and higher Al content, the degradation of γʹ and γʹ/β coatings is less significant. They are subjected to lower thermal stress but possess higher deformation resistance during cycling. However, local spallation of the oxide scale occurs on γʹ/β coating since it is insusceptible to rumpling and thus the thermal stress is difficult to release in time by plastic deformation. The γʹ coating outperforms its counterparts of γ/γʹ and γʹ/β coatings, presenting low oxidation rate, high resistance to scale cracking and spallation, meanwhile, limited elements-interdiffusion with the underlying substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Magnesium Oxide Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Thermal Barrier Coatings for Aeroengine Applications10.2514/1.20734 ↗
2. Progress update on failure mechanisms of advanced thermal barrier coatings: a review10.1016/j.porgcoat.2015.09.019 ↗
3. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
4. Advanced structural ceramics in aerospace propulsion10.1038/nmat4687 ↗
5. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects10.1179/1743280413Y.0000000019 ↗
6. Materials design for the next generation thermal barrier coatings10.1146/annurev.matsci.33.011403.113718 ↗
7. Coatings for gas turbine materials and long term stability issues10.1016/j.matdes.2004.02.005 ↗
8. Surface rumpling of a (Ni, Pt)Al bond coat induced by cyclic oxidation10.1016/S1359-6454(00)00156-7 ↗
9. Rumpling of CVD (Ni,Pt)Al diffusion coatings under intermediate temperature cycling10.1016/j.surfcoat.2009.04.016 ↗
10. Comparative study of oxidation and interdiffusion behavior of AIP NiCrAlY and sputtered nanocrystalline coatings on a nickel-based single-crystal superalloy10.1016/j.corsci.2015.05.062 ↗
11. Precipitation phases in the nickel-based superalloy DZ 125 with YSZ/CoCrAlY thermal barrier coating10.1016/j.jallcom.2011.05.102 ↗
12. On the mechanism of secondary reaction zone formation in a coated nickel-based single-crystal superalloy containing ruthenium10.1016/j.scriptamat.2013.03.015 ↗
13. Microstructure and composition evolution of a single-crystal superalloy caused by elements interdiffusion with an overlay NiCrAlY coating on oxidation10.1016/j.jmst.2019.11.017 ↗
14. On the rumpling mechanism in nickel-aluminide coatings Part I: an experimental assessment
15. High temperature stress and its influence on surface rumpling in NiCoCrAlY bond coat10.1016/j.actamat.2017.08.001 ↗
16. On the failure mechanisms of thermal barrier coatings with diffusion aluminide bond coatings10.1016/j.msea.2004.11.038 ↗
17. Characterization of a cyclic displacement instability for a thermally grown oxide in a thermal barrier system10.1016/S1359-6454(01)00071-4 ↗
18. Wrinkling of α-alumina films grown by oxidation-II. Oxide separation and failure10.1016/S1359-6454(98)00134-7 ↗
19. On the rumpling mechanism in nickel-aluminide coatings Part II: characterization of surface undulations and bond coat swelling
20. A mechanistic understanding on rumpling of a NiCoCrAlY bond coat for thermal barrier coating applications10.1016/j.actamat.2017.02.003 ↗
21. Characterization and understanding of residual stresses in a NiCoCrAlY bond coat for thermal barrier coating application10.1016/j.actamat.2015.04.053 ↗
22. Effect of Hf, Y and C in the underlying superalloy on the rumpling of diffusion aluminide coatings10.1016/j.actamat.2007.10.006 ↗
23. Influence of sulfur, platinum, and hafnium on the oxidation behavior of CVD NiAl bond coatings10.1023/A:1020525123056 ↗
24. The oxidation and rumpling behavior of overlay B2 bond coats containing Pt, Pd, Cr and Hf10.1016/j.surfcoat.2013.01.021 ↗
25. Preparation and enhanced oxidation performance of a Hf-doped single-phase Pt-modified aluminide coating10.1016/j.corsci.2016.09.014 ↗
26. A model study of displacement instabilities during cyclic oxidation10.1016/S1359-6454(01)00403-7 ↗
27. High-temperature cyclic oxidation behaviour of Pt-rich γ-γ’ coatings. Part I: Oxidation kinetics of coated AM1 systems after very long-term exposure at 1100°C10.1016/j.corsci.2018.08.050 ↗
28. High-temperature cyclic oxidation of Pt-rich γ-γ’ bond-coatings. Part II: Effect of Pt and Al on TBC system lifetime10.1016/j.corsci.2019.01.003 ↗
29. A concept for the EQ coating system for nickel-based superalloys10.1007/s11837-008-0086-z ↗
30. Development of new bond coat ‘EQ coating'system10.1007/s11661-006-0050-x ↗
31. Bond coatings with high rumpling resistance: design and characterization10.1016/j.surfcoat.2016.05.002 ↗
32. The al-enriched γ’-Ni3Al-base bond coat for thermal barrier coating applications10.1016/j.corsci.2020.108523 ↗
33. High-temperature oxidation resistance of sputtered micro-grain superalloy K38G10.1007/BF00666917 ↗
34. Oxidation and hot corrosion behavior of sputtered nanocrystalline coating of superalloy K5210.1016/j.tsf.2007.07.131 ↗
35. Influence of sputtered nanocrystalline coating on oxidation and hot corrosion of a nickel-based superalloy M95110.1016/j.jmst.2014.01.001 ↗
36. Oxidation behaviour of sputter-deposited Ni-Cr-Al micro-crystalline coatings10.1016/S1359-6454(97)00346-7 ↗
37. Oxidation behavior of Al/Y co-modified nanocrystalline coatings with different Al content on a nickel-based single-crystal superalloy10.1016/j.corsci.2020.108700 ↗
38. Nondestructive evaluation of the oxidation stresses through thermal barrier coatings using Cr3+ piezospectroscopy10.1063/1.117182 ↗
39. Determination of the piezospectroscopic coefficients for chromium-doped sapphire10.1111/j.1151-2916.1995.tb08493.x ↗
40. Effect of aluminiding coating on creep properties of Ni-base single crystal superalloys10.2320/jinstmet.71.320 ↗
41. Wrinkling of α-alumina films grown by thermal oxidation–I. Quantitative studies on single crystals of Fe-Cr-Al alloy10.1016/S1359-6454(98)00133-5 ↗
42. Application of a simple statistical spalling model for the analysis of high-temperature, cyclic-oxidation kinetics data10.1023/A:1023004430423 ↗
43. An analytical model of rumpling in thermal barrier coatings10.1016/j.jmps.2004.11.002 ↗
44. Comparison of thermal expansion and oxidation behavior of various high-temperature coating materials and superalloys10.1179/mht.2004.012 ↗
45. Thermodynamic properties of the Ni-Cr-Al system10.1016/S0966-9795(98)00138-1 ↗