In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields
Source abstract
Abstract
The fatigue fragmentation of dendritic structures of a SCN-5 wt .% Camphor transparent alloy in an ultrasound field was investigated systematically using high-speed imaging. Dynamic interactions between oscillating ultrasonic bubbles and the primary and secondary dendrites were observed and recorded. High speed images show that when an ultrasound bubble was trapped inside an interdendritic region, the oscillation of the bubble can cause cyclic bending of the dendritic arms. Consequently, a fatigue type crack initiated at the arm root and propagated through the dendrite, causing the dendrite to fragment, i.e. dendritic fragmentation. From the recorded videos, the cycle numbers for the fatigue fragmentation were extracted, then, the fatigue strength and fatigue life of the SCN-5 wt .% Camphor transparent alloy were calculated. Results showed that the cyclic fatigue load cause a crack initiating on a SCN dendrite at a much lower stress level than its tensile strength under high frequent oscillation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Eskin · 2015
2. Abramov · 1998
3. Ultrasonic processing of materials10.1007/s11663-014-0266-x ↗
4. The role of ultrasonic cavitation in refining the microstructure of aluminum based nanocomposites during the solidification process10.1016/j.ultras.2017.06.023 ↗
5. Effect of power ultrasound on solidification of aluminum A356 alloy10.1016/j.matlet.2004.09.027 ↗
6. Nucleation of solid in an undercooled liquid by cavitation10.1063/1.1707821 ↗
7. Influence of high-power ultrasonic irradiation on primary nucleation process during solidification10.1143/JJAP.46.4939 ↗
8. Effect of ultrasonic (cavitation) treatment of the melt on the microstructure evolution during solidification of aluminum alloy ingots10.3139/146.020502 ↗
9. A refining mechanism of primary Al3 Ti intermetallic particles by ultrasonic treatment in the liquid state10.1016/j.actamat.2016.06.056 ↗
10. Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy10.1016/j.jcrysgro.2015.11.034 ↗
11. Criteria of grain refinement induced by ultrasonic melt treatment of aluminum alloys containing Zr and Ti10.1007/s11661-010-0232-4 ↗
12. The grain refining mechanism of cast zinc through silver inoculation10.1016/j.actamat.2014.07.026 ↗
13. In situ observations of dendritic fragmentation due to local solute-enrichment during directional solidification of an aluminum alloy10.1016/j.actamat.2007.03.030 ↗
14. Impact of melt convection induced by ultrasonic wave on dendrite growth in Sn–Bi alloys10.1016/j.matlet.2015.02.069 ↗
15. A synchrotron X-ray radiography study of dendrite fragmentation induced by a pulsed electromagnetic field in an Al–15Cu alloy10.1016/j.actamat.2014.02.024 ↗
16. The spatial and temporal distribution of dendrite fragmentation in solidifying Al-Cu alloys under different conditions10.1016/j.actamat.2016.09.013 ↗
17. The sonocrystallisation of ice in sucrose solutions: primary and secondary nucleation10.1016/j.ultras.2003.08.001 ↗
18. The microscopic visualisation of the sonocrystallisation of ice using a novel ultrasonic cold stage10.1016/j.ultsonch.2004.01.018 ↗
19. A high-speed imaging and modeling study of dendrite fragmentation caused by ultrasonic cavitation10.1007/s11661-012-1188-3 ↗
20. Dendrites fragmentation induced by oscillating cavitation bubbles in ultrasound field10.1016/j.ultras.2017.08.004 ↗
21. A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35Cu alloy induced by ultrasonic melt processing10.1016/j.actamat.2017.09.010 ↗
22. Microstructural stress concentration: an important role in grain refinement of rheocasting structure10.1007/s11661-005-0274-1 ↗
23. High speed imaging study of the dynamics of ultrasonic bubbles at a liquid-solid interface10.4028/www.scientific.net/MSF.765.230 ↗
24. In situ observation of ultrasonic cavitation-induced fragmentation of the primary crystals formed in Al alloys10.1016/j.ultsonch.2017.03.057 ↗
25. Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound10.1016/j.actamat.2017.10.067 ↗
26. Ultrafast X-ray imaging and modelling of ultrasonic cavitations in liquid metal10.4028/www.scientific.net/MSF.765.190 ↗
27. High-speed synchrotron X-ray imaging studies of the ultrasound shockwave and enhanced flow during metal solidification processes10.1007/s11661-015-2872-x ↗
28. Mechanical deformation of dendrites by fluid flow10.1007/BF02647763 ↗
29. Suresh · 1998
30. Interdendritic spacing: Part I. Experimental studies10.1007/BF02644688 ↗
31. Direct observation of solidification microstructures around absolute stability10.1016/1359-6454(95)00448-3 ↗
32. Shock wave emissions of a sonoluminescing bubble10.1103/PhysRevLett.81.5434 ↗
33. Re-determination of succinonitrile (SCN)-camphor phase diagram10.1016/j.jcrysgro.2005.12.087 ↗
34. In situ observation of solidification patterns in diffusive conditions10.1016/j.actamat.2016.01.024 ↗
35. The growth or collapse of a spherical bubble in a viscous compressible liquid
36. Effect of alloying content on high cycle fatigue behaviour of Cu-Ti alloys10.1016/S0142-1123(96)00041-2 ↗