On the rapid hardening and exhaustion of twinning in magnesium alloy
Source abstract
Abstract
Abstract We numerically study the rapid hardening and possible role of exhaustion of twinning in magnesium alloys under twinning dominated conditions, based on the large strain elastic visco-plastic self-consistent model. It is found that upon the exhaustion of the tensile twinning, further deformation requires the material to activate Prismatic and Pyramidal slips, which have relative high critical resolved shear stress (CRSS). However, the stress level at the exhaustion of the tensile twinning is not high enough to activate Prismatic and Pyramidal slips. Consequently, the imposed strain increments must mainly be accommodated by elastic deformations, and the strain hardening rate becomes a large fraction of the elastic modulus. Therefore, it can be concluded that the rapid hardening is a composite response more associated with elasticity of a large volume fraction of the material, than the dislocation-dislocation interactions normally held responsible for strain hardening of metals.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Numerical study of the stress state of a deformation twin in magnesium10.1016/j.actamat.2014.10.048 ↗
2. Modeling of the work hardening in magnesium alloy sheets10.1016/j.ijplas.2015.08.001 ↗
3. A microstructure based analytical model for tensile twinning in a rod textured Mg alloy10.1016/j.ijplas.2015.05.003 ↗
4. Influence of orientation on twin nucleation and growth at low strains in a magnesium alloy10.1016/j.actamat.2014.07.013 ↗
5. Mechanical response of AZ31B magnesium alloy: experimental characterization and material modeling considering proportional loading at room temperature10.1016/j.ijplas.2013.10.006 ↗
6. On twinning and anisotropy in rolled Mg alloy AZ31 under uniaxial compression10.1016/j.ijsolstr.2015.03.012 ↗
7. In-situ investigation on the microstructure evolution and plasticity of two magnesium alloys during three-point bending10.1016/j.ijplas.2015.05.010 ↗
8. Visco-plastic modeling of mechanical responses and texture evolution in extruded AZ31 magnesium alloy for various loading conditions10.1016/j.ijplas.2014.10.012 ↗
9. Rate sensitivity and tension–compression asymmetry in AZ31B magnesium alloy sheet10.1098/rsta.2013.0216 ↗
10. Time and spatial resolution of slip and twinning in a grain embedded within a magnesium polycrystal10.1016/j.actamat.2014.06.030 ↗
11. Effect of the loading mode on the evolution of the deformation mechanisms in randomly textured magnesium polycrystals - comparison of experimental and modeling results10.1016/j.ijplas.2015.05.009 ↗
12. Geometrically necessary twins in bending of a magnesium alloy10.1016/j.msea.2015.08.027 ↗
13. Stochastic modeling of twin nucleation in polycrystals: an application in hexagonal close-packed metals10.1016/j.ijplas.2013.11.005 ↗
14. A generalized thermodynamically consistent distortional hardening model for Mg alloys10.1016/j.ijplas.2015.06.010 ↗
15. The effect of high yttrium solute concentration on the twinning behaviour of magnesium alloys10.1016/j.actamat.2014.09.022 ↗
16. Mechanical testing of thin sheet magnesium alloys in biaxial tension and uniaxial compression10.1007/s11340-014-9892-0 ↗
17. Influence of texture on Hall-Petch relationships in an Mg alloy10.1016/j.actamat.2014.08.023 ↗
18. Mechanical behavior of Mg subjected to strain path changes: experiments and modeling10.1016/j.ijplas.2014.10.009 ↗
19. A constitutive model of twin nucleation, propagation and growth in Magnesium alloys10.1016/j.msea.2014.11.096 ↗
20. Crystallographic analysis on the activation of multiple twins in rolled AZ31 Mg alloy sheets during uniaxial and plane strain compression10.1016/j.msea.2015.11.033 ↗
21. Sensitivity of deformation twinning to grain size in titanium and magnesium10.1016/j.actamat.2011.09.018 ↗
22. Yield point elongation due to twinning in a magnesium alloy10.1016/j.actamat.2011.11.022 ↗
23. Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn10.1016/j.actamat.2004.07.015 ↗
24. Deformation twinning in AZ31: influence on strain hardening and texture evolution10.1016/j.actamat.2010.07.041 ↗
25. Effect of dislocation transmutation on modeling hardening mechanisms by twinning in magnesium10.1016/j.ijplas.2011.09.002 ↗
26. Hardening evolution of AZ31B Mg sheet10.1016/j.ijplas.2006.03.005 ↗
27. Transformation of slip dislocations during twinning of copper-aluminum alloy crystals10.1051/metal/199794091037 ↗
28. Dislocation transmutation by tension twinning in magnesium alloy AZ3110.1016/j.ijplas.2016.01.012 ↗
29. A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials10.1016/j.jmps.2010.01.004 ↗
30. Effects of basal texture on mechanical behaviour of magnesium alloy AZ31B sheet10.1016/j.msea.2010.02.050 ↗
31. On crystal plasticity formability analysis for magnesium alloy sheets10.1016/j.ijsolstr.2010.12.004 ↗
32. Study of lattice strains in magnesium alloy AZ31 based on a large strain elastic-viscoplastic self-consistent polycrystal model10.1016/j.ijsolstr.2012.04.026 ↗
33. Studying the effect of stress relaxation and creep on lattice strain evolution of stainless steel under tension10.1016/j.actamat.2012.10.027 ↗
34. Deformation behavior of solid-solution-strengthened Mg-9wt%Al alloy: in-situ neutron diffraction and elastic-viscoplastic self-consistent modeling10.1016/j.actamat.2014.03.038 ↗
35. Evaluation of elastic-viscoplastic self-consistent polycrystal plasticity models for zirconium alloys10.1016/j.ijsolstr.2015.07.004 ↗
36. A constitutive model of twinning and detwinning for HCP polycrystals10.1016/j.msea.2012.06.038 ↗
37. A physics-based crystal plasticity model for hexagonal close packed (HCP) crystals including both twinning and de-twinning mechanisms10.1016/j.ijplas.2013.02.016 ↗
38. Modeling inelastic behavior of magnesium alloys during cyclic loading-unloading10.1016/j.ijplas.2013.01.007 ↗
39. On the Swift effect and twinning in a rolled magnesium alloy under free-end torsion10.1016/j.scriptamat.2013.05.010 ↗
40. Investigation of deformation dynamics in a wrought magnesium alloy10.1016/j.ijplas.2014.07.005 ↗
41. Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading10.1016/j.ijplas.2014.08.010 ↗
42. Deformation behavior of Mg-8.5wt.%Al alloy under reverse loading investigated by in-situ neutron diffraction and elastic viscoplastic self-consistent modeling10.1016/j.actamat.2016.01.066 ↗
43. Texture development and strain hardening in rate dependent polycrystals10.1016/0001-6160(85)90188-9 ↗
44. A new empirical equation for termination of twinning in magnesium alloys10.1016/j.scriptamat.2016.04.015 ↗
45. The determination of the elastic field of an ellipsoidal inclusion, and related problems10.1098/rspa.1957.0133 ↗
46. Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet10.1016/j.ijsolstr.2010.06.016 ↗
47. Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet10.1016/j.msea.2006.03.160 ↗
48. A model for texture development dominated by deformation twinning-application to zirconium alloys10.1016/0956-7151(91)90083-D ↗
49. The effects of texture and extension twinning on the low-cycle fatigue behavior of a rolled magnesium alloy, AZ31B10.1016/j.msea.2010.07.047 ↗
50. Numerical assessment of the role of slip and twinning in magnesium alloy AZ31B Sheet during loading path reversal10.1007/s11661-015-2890-8 ↗
51. Strengthening of a particulate metal matrix composite by quenching10.1016/0956-7151(91)90329-Y ↗