journal article·2021-06

On the grain size-thickness correlation for thin films

Altangerel Dulmaa, Florian G. Cougnon, Robin Dedoncker, Diederik Depla

Acta Materialia· Volume 212
Publisher page

Abstract

Abstract A meta-analysis of published data in combination with measurements on Al, Cu, CuO, CoCrCuFeNi, Ni90Cr10, TiN, and V sputter deposited thin films, demonstrates that the grain size is correlated to the film thickness by a power law. The growth exponent depends on the homologous temperature which is defined as the ratio between the deposition and the melting temperature of the studied material. An average value of the growth exponent close to 0.4 was found for the growth exponent for a homologous temperature between 0.14 and 0.31. Film growth models that depict an evolutionary overgrowth mechanism obtain the same growth exponent. Above a homologous temperature of approximately 0.3, a slightly higher exponent is observed which agrees with the general idea that at higher homologous temperatures the grain size is also influenced by restructuring mechanisms occurring during film growth. At low homologous temperatures ( 0.14), a substantially lower exponent was noticed. From a theoretical point of view the growth exponent’s value should be close to zero. The aforementioned boundaries of the homologous temperatures correspond with those observed in published structure zone models that describe the microstructure of physical vapor deposited thin films. The good agreement suggests that the underlying mechanism for the observed boundaries is the atom mobility. This hypothesis was further investigated by a study on the influence of intentionally added impurities on the power law behavior for Al and Cu thin films. For both materials, a similar decrease of the grain size as a function of an increasing impurity-to-metal impingement flux ratio on the substrate was observed. No change of the growth exponent is observed for Al, while the growth exponent becomes almost zero for Cu at sufficiently high impurity-to-metal flux ratios.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Metal and Thin Film Mechanics · Surface and Thin Film Phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. The hall–petch and inverse hall–petch relations and the hardness of nanocrystalline metals10.1007/s10853-019-04160-w ↗
2. Electrical-resistivity model for polycrystalline films: the case of arbitrary reflection at external surfaces10.1103/PhysRevB.1.1382 ↗
3. Kinetic model for thin film stress including the effect of grain growth10.1063/1.5030740 ↗
4. Geometric selection of crystals
5. Two-dimensional computer modelling of polycrystalline film growth10.1155/TSM.14-18.757 ↗
6. Dynamic scaling in polycrystalline growth10.1103/PhysRevB.45.8650 ↗
7. Simulations of polycrystalline growth in 2+1 dimensions10.1103/PhysRevB.51.1985 ↗
8. Simulation of faceted film growth in two-dimensions: microstructure, morphology and texture10.1016/S1359-6454(99)00086-5 ↗
9. Model of texture development in polycrystalline films growing on amorphous substrates with different topographies10.1016/S0040-6090(01)00863-X ↗
10. Modeling and visualization of polycrystalline thin film growth10.1016/j.commatsci.2004.03.021 ↗
11. Simulation of faceted film growth in three dimensions: microstructure, morphology and texture10.1016/j.actamat.2004.11.013 ↗
12. Simulation of growth dynamics in atomic layer deposition. part II. polycrystalline films from cubic crystallites10.1016/j.tsf.2006.11.024 ↗
13. Simulations of faceted polycrystalline thin films: Asymptotic analysis10.1016/j.actamat.2008.11.014 ↗
14. Analytic description of competitive grain growth10.1103/PhysRevE.81.011601 ↗
15. A phase-field model for polycrystalline thin film growth10.1016/j.jcrysgro.2011.04.044 ↗
16. Evolutionary selection, a principle governing growth orientation in vapour-deposited layers
17. Grain growth in thin films10.1146/annurev.ms.20.080190.001333 ↗
18. Structure evolution during processing of polycrystalline films10.1146/annurev.matsci.30.1.159 ↗
19. Grain growth phenomena in films: A monte carlo approach10.1116/1.573662 ↗
20. Analytical and numerical modeling of columnar evolution in thin films10.1116/1.575558 ↗
21. Use of the Voigt function in a single-line method for the analysis of x-ray diffraction line broadening10.1107/S0021889882012035 ↗
22. The nanostructure evolution during and after magnetron deposition of au films10.1016/S0040-6090(03)00928-3 ↗
23. Suryanarayana · 1998
24. A. Rohatgi, Webplotdigitizer (version 4.2), 2019. https://automeris.io/WebPlotDigitizer.
25. Estimating data from figures with a web-based program: Considerations for a systematic review10.1002/jrsm.1232 ↗
26. Igor Pro 8, WaveMetrics, Lake Oswego, Oregon 97035, USA
27. On the use of log-transformation vs. nonlinear regression for analyzing biological power laws10.1890/11-0538.1 ↗
28. Rank correlation methods
29. Quantitative correlation between intrinsic stress and microstructure of thin films10.1016/j.tsf.2016.03.039 ↗
30. Impurity dominated thin film growth10.1063/1.5021528 ↗
31. Structure and properties of thick condensates of nickel, titanium, tungsten, aluminum oxides, and zirconicum dioxide in vacuum
32. Biaxial alignment in sputter deposited thin films10.1016/j.tsf.2006.06.027 ↗
33. Fundamental structure forming phenomena of polycrystalline films and the structure zone models10.1016/S0040-6090(97)00503-8 ↗
34. Quantifying competitive grain overgrowth in polycrystalline zno thin films10.1016/j.actamat.2019.04.049 ↗
35. Sanders · 1971 · volume 1
36. The development of grain structure during growth of metallic films10.1016/0001-6160(84)90150-0 ↗
37. Grain growth in nanocrystalline iron prepared by mechanical attrition10.1016/S1359-6454(96)00300-X ↗
38. Microscopic view of epitaxial metal growth: nucleation and aggregation10.1016/S0167-5729(99)80001-6 ↗
39. Point defect reactions at surfaces and in bulk metals10.1103/PhysRevB.71.085422 ↗
40. Estimating grain-size distributions in nanocrystalline materials from x-ray diffraction profile analysis10.1080/01418619808224072 ↗
41. An investigation of thermal stability and microhardness of electrodeposited nanocrystalline nickel-21% iron alloys10.1016/S1359-6454(03)00215-5 ↗
42. Cross- and in-plane thermal conductivity of AlN thin films measured using differential 3-omega method10.1016/j.surfcoat.2017.01.100 ↗
43. Size effects on the thermal conductivity of polycrystalline platinum nanofilms
44. Microstructure and residual stress of very thin mo films10.1016/0040-6090(95)00603-6 ↗
45. Correlation between subgrains and coherently scattering domains10.1154/1.2135313 ↗
46. Grain-size dependence of superconductivity in dc sputtered nb films10.1007/s11433-009-0196-9 ↗
47. Effect of thickness on structural and optical properties of thermally evaporated cadmium sulfide polycrystalline thin films
48. Growth of thin ag films produced by radio frequency magnetron sputtering10.1016/j.tsf.2005.12.311 ↗
49. Microstructural evolution in nanostructured gold films10.1016/j.tsf.2012.01.010 ↗
50. Surface morphology control of nb thin films by biased target ion beam deposition10.1116/1.5023723 ↗
51. Optical constants and structural properties of thin gold films10.1364/OE.25.025574 ↗
52. Influence of substrate temperature and film thickness on thermal, electrical, and structural properties of HPPMS and DC magnetron sputtered ge thin films10.1002/adem.201600854 ↗
53. Grain and crystallite size in polycrystalline pyrite thin films10.1016/j.tsf.2004.11.064 ↗
54. Structural and electrical properties of copper thin films prepared by filtered cathodic vacuum arc technique10.1016/S0257-8972(00)01159-2 ↗
55. Effect of substrate temperature and film thickness on the characteristics of silver thin films deposited by DC magnetron sputtering10.1051/epjap/2012120212 ↗
56. Grain sizes of ni films measured by STM and x-ray methods10.1016/S0040-6090(96)08963-8 ↗
57. Characteristics of low-resistivity aluminum-doped zinc oxide films deposited at room temperature by off-axis radio-frequency sputtering on flexible plastic substrates10.1007/s00339-016-0250-1 ↗
58. Enhanced electrical property of nanostructured sb-doped sno2 thin film processed by soft chemical method10.1016/j.tsf.2003.10.101 ↗
59. Thickness dependent correlation between structural and optical properties of textured CdSe thin film10.1063/1.5096594 ↗
60. Microstructural evolution during film growth10.1116/1.1601610 ↗
61. Columnar structures in polycrystalline thin films developed by competitive growth10.1016/S0040-6090(97)00661-5 ↗