journal article·2019-01Open access

Elemental site occupancy in the L12 A3B ordered intermetallic phase in Co-based superalloys and its influence on the microstructure

P. Pandey, S.K. Makineni, A. Samanta, A. Sharma, S.M. Das, B. Nithin, C. Srivastava, A.K. Singh, D. Raabe, B. Gault, K. Chattopadhyay

Acta Materialia· Volume 163

Abstract

Abstract We explore the effects of the elemental site occupancy in γ′-A3B (L12) intermetallic phases and their partitioning across the γ/γ′ interface in a class of multicomponent W-free Co-based superalloys. Atom probe tomography and first principles density functional theory calculations (DFT) were used to evaluate the Cr site occupancy behavior in the γ′ phase and its effect on the γ/γ′ partitioning behavior of other solutes in a series of Co-30Ni-10Al-5Mo-2Ta-2Ti-XCr alloys, where x is 0, 2, 5, and 8 at.% Cr, respectively. The increase in Cr content from 0 to 2 to 5 at.% leads to an inversion of the partitioning behavior of the solute Mo from the γ′ phase ( K M o > 1 ) into the γ matrix ( K M o 1 ) . At 5 at.% Cr, the Cr also has a preference to replace the excess anti-site Co atoms from the B-sites. At 8 at.% Cr, the Cr develops an additional preference to replace Co atoms from the A-sites. These compositional changes in the phases and the site partitioning behavior in the γ′ phase are accompanied by an overall decrease in the lattice misfit (δ) across the γ/γ′ interfaces as measured by high-resolution X-ray diffraction at room temperature. The reduction in misfit triggers a change in morphology of the γ′ phase from cuboidal (δ ∼ +0.48% at 0 at.% Cr) to round-cornered (δ ∼ +0.34% at 5 at.% Cr) to spheroidal shaped (δ ∼ +0.19% at 8 at.% Cr) precipitates. We also observed an increase in the solvus temperature from 1066 °C to 1105 °C when adding 5 at.% Cr to the alloy. These results on the effects of Cr in Co-base superalloys enable tuning the microstructure of these alloys and widening the alloy spectrum for designing improved high temperature alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · High Temperature Alloys and Creep · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
2. Reed · 2008
3. Alloys-By-Design: application to nickel-based single crystal superalloys10.1016/j.actamat.2009.08.018 ↗
4. Alloy design for aircraft engines10.1038/nmat4709 ↗
5. Caron · 2000 · 737
6. Atomic scale structure and chemical composition across order-disorder interfaces10.1103/PhysRevLett.102.086101 ↗
7. Investigation of creep deformation mechanisms at intermediate temperatures in René 88 DT10.1016/j.actamat.2005.03.017 ↗
8. Optimal precipitate shapes in nickel-base γ–γ′ alloys10.1016/j.actamat.2011.12.008 ↗
9. Partitioning of Re between γ and γ′ phase in nickel-base superalloys10.1016/j.scriptamat.2004.09.013 ↗
10. Measurement of the lattice misfit in the single crystal nickel based superalloys CMSX-4, SRR99 and SC16 by convergent beam electron diffraction10.1016/S1359-6454(98)00085-8 ↗
11. Measurement of the effective γ/γ′ lattice mismatch during high temperature creep of Ni-based single crystal superalloy10.1016/j.matchar.2012.12.003 ↗
12. Temperature dependence of γ-γ’ lattice mismatch in Nickel-base superalloys10.1016/0025-5416(85)90189-2 ↗
13. The influence of different alloying elements on the development of the γ/γ′ microstructure of nickel-base superalloys during high-temperature annealing and deformation10.1016/j.actamat.2005.04.041 ↗
14. The influence of coherency strain on the elevated temperature tensile behavior of Ni-15Cr-AI-Ti-Mo alloys10.1007/BF02643569 ↗
15. The influence of cobalt, tantalum, and tungsten on the elevated temperature mechanical properties of single crystal nickel-base superalloys10.1007/BF02670373 ↗
16. Directional coarsening in nickel-base single crystals with high volume fractions of coherent precipitates10.1016/0956-7151(94)90011-6 ↗
17. Influence of coherency stress on microstructural evolution in model Ni-Al-Mo alloys10.1016/0956-7151(94)00337-H ↗
18. The γ/γ′ mismatch in Ni based superalloys: in situ measurements during a creep test10.1016/S0168-583X(02)01699-3 ↗
19. Cobalt-base high-temperature alloys10.1126/science.1121738 ↗
20. Makineni
21. Lee · 1971
22. A new tungsten-free γ–γ’ Co–Al–Mo–Nb-based superalloy10.1016/j.scriptamat.2014.11.009 ↗
23. Synthesis of a new tungsten-free γ–γ′ cobalt-based superalloy by tuning alloying additions10.1016/j.actamat.2014.11.016 ↗
24. A new class of high strength high temperature Cobalt based γ–γ′ Co–Mo–Al alloys stabilized with Ta addition10.1016/j.actamat.2015.06.034 ↗
25. Effects of quaternary alloying elements on the γ′ solvus temperature of Co–Al–W based alloys with fcc/L12 two-phase microstructures10.1016/j.jallcom.2010.08.050 ↗
26. Ductility enhancement by boron addition in Co–Al–W high-temperature alloys10.1016/j.scriptamat.2009.05.037 ↗
27. Effect of B and Cr on the high temperature oxidation behaviour of novel γ/γ′-strengthened Co-base superalloys10.1016/j.corsci.2011.04.020 ↗
28. Alloying effects in polycrystalline γ′ strengthened Co–Al–W base alloys10.1016/j.intermet.2013.10.022 ↗
29. Elemental partitioning and mechanical properties of Ti- and Ta-containing Co–Al–W-base superalloys studied by atom probe tomography and nanoindentation10.1016/j.actamat.2014.06.020 ↗
30. Solute partitioning in multi-component γ/γ′ Co–Ni-base superalloys with near-zero lattice misfit10.1016/j.scriptamat.2015.10.039 ↗
31. Influence of ruthenium on microstructural evolution in a model CoAlW superalloy10.1016/j.actamat.2016.07.014 ↗
32. On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys10.1016/j.actamat.2017.12.020 ↗
33. Effect of Cr addition on γ–γ′ cobalt-based Co–Mo–Al–Ta class of superalloys: a combined experimental and computational study10.1007/s10853-017-1159-6 ↗
34. A new polycrystalline Co-Ni superalloy
35. Chromium and tantalum site substitution patterns in Ni3Al(L12) γ′-precipitates10.1063/1.2956398 ↗
36. Site preference of ternary alloying elements in Ni3Al: a first-principles study10.1016/j.actamat.2005.10.039 ↗
37. Site preference and interaction energies of Co and Cr in gamma prime Ni 3 Al: a first-principles study10.1088/0965-0393/21/5/055006 ↗
38. Atomic ordering characteristics of Ni3Al intermetallics with substitutional ternary additions10.1016/S1359-6454(96)00238-8 ↗
39. The role of the atom probe in the study of nickel-based superalloys10.1016/S1044-5803(99)00050-9 ↗
40. Identification of the partitioning characteristics of ruthenium in single crystal superalloys using atom probe tomography10.1016/j.scriptamat.2004.04.019 ↗
41. Three-dimensional atom-probe tomography: advances and applications10.1146/annurev.matsci.37.052506.084200 ↗
42. Phase transformation and segregation to lattice defects in Ni-base superalloys10.1017/S143192760707078X ↗
43. Determination of solute site occupancies within γ′ precipitates in nickel-base superalloys via orientation-specific atom probe tomography10.1016/j.ultramic.2015.04.015 ↗
44. Site occupancy of chromium in the γ′-Ni3Al phase of nickel-based superalloys: a combined 3D atom probe and first-principles study10.1080/09500839.2012.690904 ↗
45. Effects of tantalum on the temporal evolution of a model Ni–Al–Cr superalloy during phase decomposition10.1016/j.actamat.2008.10.029 ↗
46. The influence of tungsten on the chemical composition of a temporally evolving nanostructure of a model Ni-Al-Cr superalloy10.1017/S1431927604040589 ↗
47. Microstructural and phase equilibria study in the Ni–Al–Cr–W system at 1173 and 1273 K10.1016/S0966-9795(03)00023-2 ↗
48. On the interplay between tungsten and tantalum atoms in Ni-based superalloys: an atom-probe tomographic and first-principles study10.1063/1.3073885 ↗
49. Effects of tantalum on the partitioning of tungsten between the γ- and γ′-phases in nickel-based superalloys: linking experimental and computational approaches10.1016/j.actamat.2010.07.004 ↗
50. Combined atom probe tomography and first-principles calculations for studying atomistic interactions between tungsten and tantalum in nickel-based alloys10.1016/j.actamat.2014.03.064 ↗
51. Elemental partitioning in Ru-containing nickel-base single crystal superalloys10.1016/j.msea.2006.12.036 ↗
52. Taylor · J. Inst. Met. · 1952 · 81 · 451
53. Improvement of stress–rupture property by Cr addition in Ni-based single crystal superalloys10.1016/j.msea.2011.01.060 ↗
54. Preparation of high quality Al TEM specimens via a double-jet electropolishing technique10.1016/j.matchar.2007.04.003 ↗
55. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
56. Correlative microscopy—novel methods and their applications to explore 3D chemistry and structure of nanoscale lattice defects: a case study in superalloys
57. ASTM B311-17 · 2017
58. ASTM E562-11 · 2011
59. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
60. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
61. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
62. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
63. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
64. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
65. High-precision sampling for Brillouin-zone integration in metals10.1103/PhysRevB.40.3616 ↗
66. Energetics of homogeneously-random fcc Al-Ag alloys: a detailed comparison of computational methods10.1016/S0927-0256(97)00016-5 ↗
67. First-principles calculations of the structural and thermodynamic properties of bcc, fcc and hcp solid solutions in the Al–TM (TM=Ti, Zr and Hf) systems: a comparison of cluster expansion and supercell methods10.1016/j.actamat.2008.03.006 ↗
68. Generation and performance of special quasirandom structures for studying the elastic properties of random alloys: application to Al-Ti10.1103/PhysRevB.81.094203 ↗
69. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
70. Efficient stochastic generation of special quasirandom structures10.1016/j.calphad.2013.06.006 ↗
71. Multicomponent multisublattice alloys, nonconfigurational entropy and other additions to the Alloy Theoretic Automated Toolkit10.1016/j.calphad.2008.12.005 ↗
72. Finite deformations of an elastic solid10.2307/2371405 ↗
73. The compressibility of media under extreme pressures10.1073/pnas.30.9.244 ↗
74. Finite elastic strain of cubic crystals10.1103/PhysRev.71.809 ↗
75. An X-ray study of creep-deformation induced changes of the lattice mismatch in the γ′-hardened monocrystalline nickel-base superalloy SRR 9910.1016/0956-7151(91)90095-I ↗
76. A novel type of Co–Ti–Cr-base superalloys with low mass density10.1016/j.actamat.2017.06.024 ↗
77. Davis · 1990
78. Qualification of the tomographic reconstruction in atom probe by advanced spatial distribution map techniques10.1016/j.ultramic.2009.03.016 ↗
79. Atom probe microscopy investigation of Mg site occupancy within δ′ precipitates in an Al–Mg–Li alloy10.1016/j.scriptamat.2012.02.021 ↗
80. Elemental partitioning and site-occupancy in γ/γ′ forming Co-Ti-Mo and Co-Ti-Cr alloys10.1016/j.scriptamat.2018.05.041 ↗
81. First-principles study of Co3(Al,W) alloys using special quasi-random structures10.1016/j.scriptamat.2008.07.021 ↗
82. Thermodynamic stability of Co–Al–W L12 γ′10.1016/j.actamat.2013.01.004 ↗
83. Atomic radii in crystals10.1063/1.1725697 ↗
84. Pettifor · 2002
85. Partitioning and site occupancy of Ta and Mo in Co-base γ/γ′ alloys studied by atom probe tomography10.1016/j.intermet.2014.01.020 ↗
86. Creep and directional coarsening in single crystals of new γ–γ′ cobalt-base alloys10.1016/j.scriptamat.2012.01.008 ↗
87. Elemental partitioning, lattice misfit and creep behaviour of Cr containing γ′ strengthened Co base superalloys10.1179/1743284715Y.0000000112 ↗
88. Partition behavior of alloying elements and phase transformation temperatures in Co–Al–W-base quaternary systems10.1016/j.intermet.2012.07.033 ↗