Attaining high magnetic performance in as-sintered multi-main-phase Nd-La-Ce-Fe-B magnets: Toward skipping the post-sinter annealing treatment
Source abstract
Abstract
Abstract Two-step post-sinter annealing (PSA) treatment, due to its universal applicability, has been one of the most effective strategies for enhancing the coercivity of Nd-Fe-B sintered magnets. Here we report a peculiar phenomenon that the as-sintered multi-main-phase (MMP) Nd-La-Ce-Fe-B magnet exhibits the highest reported to date coercivity of 13.0 kOe upon 25 wt% La-Ce substituting for Nd, combined with Br = 13.12 kG, and (BH)max = 41.67 MGOe. Further annealing cannot enhance the coercivity whereas the remanence and energy product are drastically lowered, i.e. to 11.0 kOe, 12.57 kG, and 38.71 MGOe after two-step PSA, being remarkably different from the conventional Nd-Fe-B. Microstructural analysis reveals that the as-sintered Nd-La-Ce-Fe-B magnet with coexisting REFe2 (Fd 3 ¯ m) and RE-rich (Fm 3 ¯ m) intergranular phases possesses continuous GB layer isolating adjacent ferromagnetic grains. Hence the beneficial role of PSA on modifying the microstructure and strengthening the coercivity is tiny. Additionally, high-temperature PSA destroys the initial chemical heterogeneity of MMP magnets, leading to the formation of REs homogeneously distributed grains and resultant reduction of the intrinsic magnetic properties. As evidenced by in-situ Lorentz TEM characterization, PSA sample with reduced chemical gradient exhibits quick domain wall motion, compared to the as-sintered one with basically unchanged magnetic domain structure upon the same applied field. The proof-of-principle micromagnetic simulation further confirms that retaining the inhomogeneous La/Ce/Nd distribution is essential to suppress the magnetic dilution effect. These findings demonstrate the realistic prospect of skipping PSA treatment in MMP magnets, which can not only reduce the production process and cost, but also delight the scenario for designing high-performance 2:14:1-type sintered magnets based on abundant La/Ce.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Rare-earth and actinide compounds · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. New material for permanent magnets on a base of Nd and Fe10.1063/1.333572 ↗
2. Microstructure of a Dy-free Nd-Fe-B sintered magnet with 2 T coercivity10.1016/j.actamat.2018.06.037 ↗
3. Prospect for HRE-free high coercivity Nd-Fe-B permanent magnets10.1016/j.scriptamat.2018.03.012 ↗
4. A nanocomposite structure in directly cast NdFeB based alloy with low Nd content for potential anisotropic permanent magnets10.1016/j.matdes.2017.01.008 ↗
5. Cerium: an unlikely replacement of Dysprosium in high performance Nd-Fe-B permanent magnets10.1002/adma.201404892 ↗
6. Rare earth elements as critical raw materials: focus on international markets and future strategies10.1016/j.resourpol.2012.07.001 ↗
7. Manipulating Ce valence in RE2Fe14B tetragonal compounds by La-Ce Co-doping: resultant crystallographic and magnetic anomaly10.1038/srep30194 ↗
8. Coercivity enhancement of hot-deformed Ce-Fe-B magnets by grain boundary infiltration of Nd-Cu eutectic alloy10.1016/j.actamat.2017.10.071 ↗
9. R2Fe14B materials: intrinsic properties and technological aspects10.1103/RevModPhys.63.819 ↗
10. Heavy rare earth free, free rare earth and rare earth free magnets – vision and reality10.1016/j.scriptamat.2018.01.032 ↗
11. Influence of Ce content on the rectangularity of demagnetization curves and magnetic properties of Re-Fe-B magnets sintered by double main phase Alloy method10.1109/TMAG.2013.2278018 ↗
12. Achievement of high coercivity in sintered R-Fe-B magnets based on misch-metal by dual alloy method10.1063/1.4869202 ↗
13. Chemically inhomogeneous RE-Fe-B permanent magnets with high figure of merit: solution to global rare earth criticality10.1038/srep32200 ↗
14. Effects of REFe2 on microstructure and magnetic properties of Nd-Ce-Fe-B sintered magnets10.1016/j.actamat.2017.02.002 ↗
15. Improved thermal stability of Nd-Ce-Fe-B sintered magnets by Y substitution10.1016/j.scriptamat.2016.12.013 ↗
16. Grain boundary restructuring of multi-main-phase Nd-Ce-Fe-B sintered magnets with Nd hydrides10.1016/j.actamat.2017.09.045 ↗
17. Microstructure and magnetic properties of core-shell Nd-La-Fe-B sintered magnets10.1016/j.jallcom.2018.03.291 ↗
18. Tuning Ce distribution for high performanced Nd-Ce-Fe-B sintered magnets10.1016/j.jmmm.2016.06.048 ↗
19. Effect of post-sinter annealing on the coercivity and microstructure of Nd-Fe-B permanent magnets10.1016/j.actamat.2008.11.019 ↗
20. Strategy for high-coercivity Nd-Fe-B magnets10.1016/j.scriptamat.2012.06.038 ↗
21. Grain boundary and interface chemistry of an Nd-Fe-B-based sintered magnet10.1016/j.actamat.2011.10.043 ↗
22. An investigation of the microstructure in the grain boundary region of Nd-Fe-B sintered magnet during post-sintering annealing10.1016/j.scriptamat.2013.01.019 ↗
23. Improvement of coercivity of sintered NdFeB permanent magnets by heat treatment10.1016/S0304-8853(01)00967-2 ↗
24. Coercivity enhancement of low rare earth Nd-Fe-B sintered magnets by optimizing microstructure10.1016/j.jmmm.2015.01.043 ↗
25. Change of microstructure and magnetic properties of sintered Nd-Fe-B induced by annealing10.1016/j.jmmm.2005.06.003 ↗
26. Effect of post-sintering annealing on microstructure and coercivity of Al85Cu15-added Nd-Fe-B sintered magnets10.1016/j.jmmm.2010.07.031 ↗
27. On the reversible and fully repeatable increase in coercive field of sintered Nd-Fe-B magnets following post sinter annealing10.1016/j.jmmm.2014.02.025 ↗
28. Temperature dependence of the crystal structures and phase fractions of secondary phases in a Nd-Fe-B sintered magnet10.1016/j.actamat.2018.05.020 ↗
29. Post-sinter annealing influences on coercivity of multi-main-phase Nd-Ce-Fe-B magnets10.1016/j.actamat.2017.12.027 ↗
30. Permanent magnetic properties of rapidly quenched (La,Ce)2Fe14B nanomaterials based on La-Ce mischmetal10.1016/j.jallcom.2015.08.044 ↗
31. McMichael
32. Two- and three-dimensional calculation of remanence enhancement of rare-earth based composite magnets10.1063/1.358026 ↗
33. Micromagnetic simulation of the influence of grain boundary on cerium substituted Nd-Fe-B magnets10.1063/1.4972803 ↗
34. Microstructure and temperature dependent of coercivity of hot-deformed Nd-Fe-B magnets diffusion processed with Pr-Cu alloy10.1016/j.actamat.2015.08.013 ↗
35. Quantitative phase-sensitive imaging in a transmission electron microscope10.1016/S0304-3991(99)00174-6 ↗
36. Phase measurement of atomic resolution image using transport of intensity equation
37. Enhanced coercivity of Nd-Ce-Fe-B sintered magnets by adding (Nd, Pr)-H powders10.1016/j.jallcom.2017.05.257 ↗
38. Effect of Ce on the magnetic properties and microstructure of sintered Didymium-Fe-B magnets
39. Static and dynamic magnetic response of CeFe210.1063/1.370230 ↗
40. Crucial role of the REFe2 intergranular phase on corrosion resistance of Nd-La-Ce-Fe-B sintered magnets10.1016/j.jallcom.2017.11.372 ↗
41. A study on the Nd-rich phase evolution in the Nd-Fe-B sintered magnet and its mechanism during post-sintering annealing10.1016/j.jallcom.2012.05.075 ↗
42. Dependence of magnetic, phase-transformation and microstructural characteristics on the Cu content of Nd-Fe-B sintered magnet10.1016/j.actamat.2013.11.063 ↗
43. Impact of different Nd-rich crystal-phases on the coercivity of Nd-Fe-B grain ensembles10.1016/j.scriptamat.2013.08.029 ↗
44. Dependence of the crystal structure of the Nd-rich phase on oxygen content in an Nd-Fe-B sintered magnet10.1016/j.scriptamat.2008.03.004 ↗
45. Measuring diffusion using the differential form of Fick's law and magnetic resonance imaging10.1088/1367-2630/13/1/015005 ↗
46. Microstructure modification and coercivity enhancement of Nd-Ce-Fe-B sintered magnets by grain boundary diffusing Nd-Dy-Al alloy10.1016/j.jmmm.2017.06.116 ↗
47. Coercivity enhancement of (Nd,Ce)-Fe-B sintered magnets by doping Nd-Fe additives10.1063/1.4976722 ↗
48. Coercivity enhancement in (Ce, Nd)-Fe-B sintered magnets prepared by adding NdHx powders10.1016/j.jmmm.2017.03.078 ↗
49. Significant coercivity enhancement of hot deformed NdFeB magnets by doping Ce-containing (PrNdCe)70Cu30 alloys powders10.1016/j.scriptamat.2017.11.052 ↗
50. Enhanced coercivity and grain boundary chemistry in diffusion-processed Ce13Fe79B8 ribbons10.1016/j.matlet.2016.12.060 ↗