The mechanics of shape memory alloy metal rubber
Source abstract
Abstract
This work presents a theoretical and experimental characterization of shape memory alloy metal rubber (SMA-MR) material. SMA-MR is a novel porous damping solid made of coil entangled nitinol wires. The constitutive model proposed in this work takes into account the geometry of the coils used, the manufacturing parameters of the SMA-MR material together with the thermo-mechanical behavior of the shape memory alloy wires. Metal rubber samples made with nitinol constitutive material are fabricated and tested under different quasi-static loading and temperature conditions. The special characteristics of SMA-MR such as hysteretic behavior, nonlinear stiffness, transverse isotropy, dry friction damping property and temperature dependency are predicted by the model, with the comparison between the theoretical and experimental results yielding discrepancies lower than 5% in the majority of the conditions considered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Structural Engineering and Vibration Analysis · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Numerical modeling methodology and experimental study for piezoelectric vibration damping control of rotating composite fan blades10.1016/j.compstruc.2013.06.001 ↗
2. Piezoelectric bending response and switching behavior of ferroelectric/paraelectric bilayers10.1016/j.actamat.2007.10.011 ↗
3. Control of forced vibration using multi-electrode electro-rheological fluid dampers10.1115/1.2889755 ↗
4. Vibration control of a structural system using magneto-rheological fluid mount10.1177/1045389X05053917 ↗
5. Structural anelasticity, elasticity and broken ergodicity in Ni–Ti shape memory alloys10.1016/j.actamat.2014.04.010 ↗
6. Nonlinear control of a shape memory alloy adaptive tuned vibration absorber10.1016/j.jsv.2005.01.018 ↗
7. Shabalovskaya · Bio Med. Mater. Eng. · 2002 · 12 · 69
8. Compression mechanics of nickel-based superalloy metal rubber10.1016/j.msea.2013.05.064 ↗
9. Compressive and dissipative behavior of metal rubber under constraints
10. J. Hong, B. Liu, D. Zhang, Y. Ma. Shape memory effect and hysteresis behavior of shape memory alloy metal rubber. in: Proceedings of ASME TURBO EXPO, Copenhagen, Denmark, 2012, June 11–15, p. 69244.10.1115/GT2012-69244 ↗
11. 3D entangled wire reinforced metallic composites10.1016/j.msea.2012.03.058 ↗
12. Experimental evaluation of a metal mesh bearing damper10.1115/1.483214 ↗
13. Rotordynamic bearing dampers for cryogenic rocket engine turbopumps10.2514/2.6157 ↗
14. Hysteretic properties of metal rubber particles10.1177/0954406212452380 ↗
15. Andres. Measurements of rotordynamic response and temperatures in a rotor supported on metal mesh foil bearings10.1115/1.4025237 ↗
16. Damping capacity measurement of elastic porous wire-mesh material in wide temperature range10.1016/j.jmatprotec.2007.12.053 ↗
17. Dynamic mechanical behavior of nickel-based superalloy metal rubber10.1016/j.matdes.2013.10.088 ↗
18. Research on the shape memory effect and thermalelasticity of a novel intellectual damping material10.7498/aps.61.168102 ↗
19. Experimental investigation on shape memory alloy metal rubber10.1007/s11431-013-5210-9 ↗
20. Mechanical properties and theoretical modeling of self-centering shape memory alloy pseudo-rubber10.1088/0964-1726/20/11/115008 ↗
21. A theoretical model and experimental investigation of a nonlinear constitutive equation for elastic porous metal rubbers10.1007/s11029-005-0056-2 ↗
22. Chegodaev · 2000
23. A Micromechanics constitutive model of the metal rubber materials based on the radial and axial combined deformation of the microsprings
24. Theoretical model of metal rubber
25. J. Hong, B. Zhu, Y. Ma, Theoretical and experimental investigation on nonlinear characterization of metal rubber, in: Proceedings of ASME TURBO EXPO, Vancouver, Canada, 2011, June 6–10, p. 45772.10.1115/GT2011-45772 ↗
26. A novel smart rotor support with shape memory alloy metal rubber for high temperatures and variable amplitude vibrations10.1088/0964-1726/23/12/125016 ↗
27. B. Ertas, H. Luo, D. Hallman, Dynamic characteristics of shape memory alloy metal mesh dampers, in: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, 2009, May 4–7, p. 2521.10.2514/6.2009-2521 ↗
28. Study of a new application form of shape memory alloy superelasticity10.1088/0964-1726/12/6/N02 ↗
29. Zhang · 2008
30. Transient growth and stick-slip in sliding friction
31. Friction-induced stick-slip intensified by corrosion of gray iron brake disc10.1016/j.wear.2013.11.008 ↗
32. Prasher · J. Alloys Compd. · 2014 · 46910.1016/j.jallcom.2014.06.109 ↗
33. Thermomechanical sketch of shape memory effect: one dimensional tensile behavior
34. C.L. Magee, The nucleation of martensite phase transformation, in: American Society for Metals, London, Metals Park, 1970, p. 115.