journal article·2020-08Open access

Understanding the surface oxide evolution of T91 ferritic-martensitic steel in supercritical water through advanced characterization

Kai Chen, Lefu Zhang, Zhao Shen

Acta Materialia· Volume 194

Abstract

Abstract The surface oxide scale formed on T91 steel after exposure to deaerated supercritical water (SCW) at 600 °C for 100–1500 h are characterized in detail to reveal the oxide evolution over time. A triplex structure with outer, inner and internal oxide layers has been confirmed. The thickness of each oxide layer increases with the exposure time following the power law kinetics. The different oxide phases in each oxide layer are the results of the decreasing partial pressure of oxygen inwards the depth of oxide scale. The inner and internal oxide layers are not uniform in Fe and Cr contents. The internal oxide layer consists of Cr-rich oxide precipitates surrounded by metal matrix in the grain interior, which could be explained by the internal oxidation mechanism. After a further long-time exposure, a continuous thin Cr-rich spinel oxide layer is formed at the internal oxide layer-metal matrix interface, which is the result of transition from internal to external oxidation when the outward diffusion of Cr exceeds the inward diffusion of oxygen. The inner oxide layer consists of Cr-rich spinel oxide precipitates surrounded by Fe-rich spinel oxide. The formation of the inner oxide layer is the result of further oxidation of the internal oxide layer where the metal matrix in the grain interior is oxidized into Fe-rich spinel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics · Subcritical and Supercritical Water Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Current status and challenges of supercritical fluid thermal hydraulics10.1016/j.nucengdes.2019.110176 ↗
2. Corrosion and stress corrosion cracking in supercritical water10.1016/j.jnucmat.2007.05.017 ↗
3. Thermal-hydraulic and neutron-physical characteristics of a new SCWR fuel assembly10.1016/j.anucene.2008.11.001 ↗
4. Materials assessment for the Canadian SCWR core concept10.1007/s11837-015-1758-0 ↗
5. Selection and corrosion evaluation tests of candidate SCWR fuel cladding materials10.1016/j.nucengdes.2011.08.086 ↗
6. A roadmap for tailoring the strength and ductility of ferritic/martensitic T91 steel via thermo-mechanical treatment10.1016/j.actamat.2016.04.031 ↗
7. Oxidation of ferritic-martensitic alloys T91, HCM12A and HT-9 in supercritical water10.1016/j.jnucmat.2007.05.023 ↗
8. Progress in corrosion resistant materials for supercritical water reactors10.1016/j.corsci.2009.07.007 ↗
9. Chapter 6 - Corrosion issues in current and next-generation nuclear reactors
10. Oxidation mechanism of T91 steel in liquid lead-bismuth eutectic: with consideration of internal oxidation10.1038/srep35268 ↗
11. Comparative oxidation behaviour of Fe-9Cr steel in CO2 and H2O at 550 °C: detailed analysis of the inner oxide layer10.1016/j.corsci.2015.07.032 ↗
12. Oxidation mechanism of an Fe–9Cr–1Mo steel by liquid Pb–Bi eutectic alloy at 470 °C (Part II)10.1016/j.corsci.2008.06.050 ↗
13. A review of the oxidation behaviour of structural alloys in steam10.1179/095066010X12646898728165 ↗
14. Fireside corrosion and steamside oxidation of 9–12%Cr martensitic steels exposed for long term testing10.1179/174327809X419168 ↗
15. 55Fe and 18O tracers in magnetite scales growing on iron and dilute iron-silicon alloys
16. The mechanism of corrosion of Fe-9%Cr alloys in carbon dioxide10.1007/BF00603476 ↗
17. Oxygen-18 and deuterium profiling in thick films on Fe-9% Cr alloys by 3 MeV nuclear microprobe10.1016/0010-938X(80)90105-5 ↗
18. On the mechanism of sulphide scale formation on iron10.1016/S0010-938X(65)80018-X ↗
19. The influence of metal lattice vacancies on the oxidation of high temperature materials10.1016/0010-938X(77)90004-X ↗
20. The role of metal lattice vacancies in the high temperature oxidation of nickel10.1016/S0010-938X(72)80013-1 ↗
21. The mechanism of high temperature aqueous corrosion of steel10.1016/0010-938X(89)90120-0 ↗
22. Oxidation of ferritic and ferritic-martensitic steels in flowing and static supercritical water10.1016/j.corsci.2015.10.017 ↗
23. Corrosion behavior of 9-12% Cr ferritic-martensitic steels in supercritical water10.1016/j.corsci.2009.12.032 ↗
24. The characteristic of oxide scales on T91 tube after long-term service in an ultra-supercritical coal power plant10.1016/j.supflu.2012.08.015 ↗
25. Investigation on early formation and evolution of oxide scales on ferritic–martensitic steels in supercritical water10.1016/j.corsci.2018.02.036 ↗
26. EFTEM and EELS analysis of the oxide layer formed on HCM12A exposed to SCW10.1016/j.jnucmat.2012.06.017 ↗
27. Corrosion behavior of ferritic/martensitic steels CNS-Ⅰ and modified CNS-Ⅱ in supercritical water10.1016/S1006-706X(12)60102-2 ↗
28. Influence of temperature on the oxidation behavior of a ferritic-martensitic steel in supercritical water10.1016/j.corsci.2016.10.020 ↗
29. Effects of exposure temperature and time on corrosion behavior of a ferritic-martensitic steel P92 in aerated supercritical water10.1016/j.corsci.2014.10.022 ↗
30. Oxidation of austenitic and ferritic/martensitic alloys in supercritical water10.1016/j.supflu.2013.03.014 ↗
31. Microstructure evolution and corrosion behaviour of an ASTM A213 T91 tube after long term creep exposure10.1016/j.engfailanal.2017.03.023 ↗
32. Corrosion of ferritic-martensitic steels in steam and supercritical water10.1016/j.jnucmat.2012.09.037 ↗
33. Oxidation behavior of ferritic–martensitic and ODS steels in supercritical water10.1016/j.jnucmat.2012.03.009 ↗
34. Anomalous temperature dependence of oxidation kinetics during steam oxidation of ferritic steels in the temperature range 550–650 C10.1016/j.corsci.2004.01.010 ↗
35. Oxidation of 9Cr oxide dispersion strengthened steel exposed in supercritical water10.1016/j.jnucmat.2007.05.018 ↗
36. Corrosion resistance of candidate cladding materials for supercritical water reactor10.1016/j.anucene.2018.12.007 ↗
37. A study on the corrosion and stress corrosion cracking susceptibility of 310-ODS steel in supercritical water10.1016/j.jnucmat.2018.11.016 ↗
38. A research on the corrosion and stress corrosion cracking susceptibility of 316L stainless steel exposed to supercritical water10.1016/j.corsci.2017.08.027 ↗
39. Corrosion and stress corrosion cracking susceptibility of type 347H stainless steel in supercritical water10.5006/2459 ↗
40. Stress corrosion crack growth behavior of type 310S stainless steel in supercritical water10.5006/2775 ↗
41. Corrosion behavior of alumina-forming and oxide dispersion strengthened austenitic 316 stainless steel in supercritical water10.1016/j.corsci.2018.04.026 ↗
42. Corrosion behavior of ferritic-martensitic steel T91 in supercritical water10.1016/j.corsci.2005.08.021 ↗
43. Khanna · 2002 · 20
44. Diffusion processes in high technology materials
45. Grain boundary diffusion and grain boundary segregation
46. FactSage Thermochemical Software and Databases, 2010-201610.1016/j.calphad.2016.05.002 ↗
47. Corrosion of 9Cr steel in CO2 at intermediate temperature I: mechanism of void-induced duplex oxide formation10.1007/s11085-011-9271-5 ↗
48. Oxidation of Fe–10Cr in O2 and in O2 + H2O environment at 600 °C: a microstructural investigation10.1016/j.corsci.2013.06.016 ↗
49. High temperature oxidation of Fe–9Cr–1Mo steel in stagnant liquid lead–bismuth at several temperatures and for different lead contents in the liquid alloy10.1016/j.jnucmat.2008.02.006 ↗
50. Modelling of the oxide scale formation on Fe-Cr steel during exposure in liquid lead-bismuth eutectic in the 450–600 °C temperature range10.1002/maco.201005871 ↗
51. Corrosion behavior of a ferritic/martensitic steel HCM12A exposed to harsh environments10.1016/j.jnucmat.2007.05.001 ↗
52. Influence of alloy microstructure on oxide growth in HCM12A in supercritical water
53. Quantitative approach for determining the critical volume fraction for the transition from internal to external oxidation10.1007/s11085-014-9516-1 ↗
54. Effect of alloy composition and exposure conditions on the selective oxidation behavior of ferritic Fe–Cr and Fe–Cr–X alloys10.1007/s11085-010-9215-5 ↗
55. Influence of the dissolved oxygen content on corrosion of the ferritic-martensitic steel P92 in supercritical water10.1016/j.corsci.2011.11.013 ↗