journal article·2020-03Open access

Direct measurements of slip irreversibility in a nickel-based superalloy using high resolution digital image correlation

J.C. Stinville, P.G. Callahan, M.A. Charpagne, M.P. Echlin, V. Valle, T.M. Pollock

Acta Materialia· Volume 186

Abstract

Abstract Fatigue crack nucleation in crystalline materials typically develops due to highly localized cyclic slip. During a fatigue cycle, reverse slip differs locally from slip in the forward direction particularly in precipitate-containing materials such as superalloys. In this paper we report the first direct measurements of irreversibility at the scale of individual slip bands by high-resolution digital image correlation (DIC) in a polycrystalline nickel-based superalloy. Quantitative measurements of the slip irreversibility are challenging for regions of material that have a size that captures the microstructure and its variability. High spatial resolution at the nanometer scale during experimental measurements is needed to observe slip localization during deformation. Moreover, large fields are also needed to obtain the material response over statistically representative populations of microstructural configurations. Recently, high resolution scanning electron microscope (SEM) digital image correlation (DIC) has been extended for quantitative analysis of discontinuities induced by slip events using the Heaviside-DIC method. This novel method provides quantitative measurements of slip localization at the specimen surface. In this paper, the Heaviside-DIC method is used to measure slip irreversibility and plastic strain accumulation in a nickel-based superalloy. The method detects bands with high levels of irreversibility early in cycling that ultimately form fatigue cracks upon further cycling. The local microstructural configurations that induce large amounts of plasticity and slip irreversibility are correlated to crack nucleation locations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. Cyclic slip irreversibilities and the evolution of fatigue damage10.1007/s11661-009-9839-8 ↗
2. High temperature fatigue of nickel-base superalloys – a review with special emphasis on deformation modes and oxidation10.1016/j.engfailanal.2009.01.010 ↗
3. On the unified view of the contribution of plastic strain to cyclic crack initiation: impact of the progressive transformation of shear bands to persistent slip bands10.1016/j.actamat.2014.11.020 ↗
4. Mechanical behaviour and damage processes of Udimet 720Li: influence of localized plasticity at grain boundaries
5. A study of dislocation transmission through a grain boundary in hcp ti-6Al using micro-cantilevers10.1016/j.actamat.2015.10.023 ↗
6. A combined grain scale elastic–plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy10.1016/j.actamat.2015.09.050 ↗
7. Sub-grain scale digital image correlation by electron microscopy for polycrystalline materials during elastic and plastic deformation
8. Fatigue deformation in a polycrystalline nickel base superalloy at intermediate and high temperature: competing failure modes10.1016/j.actamat.2018.03.035 ↗
9. Grain boundary-slip bands interactions: impact on the fatigue crack initiation in a polycrystalline forged ni-based superalloy10.1016/j.actamat.2015.08.009 ↗
10. In-Situ mechanical testing for characterizing strain localization during deformation at elevated temperatures10.1007/s11340-011-9499-7 ↗
11. Microstructural features controlling the variability in low-cycle fatigue properties of alloy inconel 718DA at intermediate temperature10.1007/s11661-015-3291-8 ↗
12. 4.01 - Cyclic Deformation, Crack Initiation, and Low-cycle Fatigue
13. Chapter 27 - Fatigue
14. Coarse slip model of fatigue10.1016/0001-6160(69)90099-6 ↗
15. Microstructural statistics for fatigue crack initiation in polycrystalline nickel-base superalloys10.1007/s10704-017-0241-z ↗
16. A cyclic slip irreversibility based model for fatigue crack initiation of nickel base alloys10.1016/j.ijfatigue.2017.04.007 ↗
17. Cyclic slip irreversibility and fatigue life: a microstructure-based analysis10.1016/j.actamat.2012.10.029 ↗
18. A model for slip irreversibility, and its effect on the fatigue crack propagation threshold in a nickel-base superalloy10.1016/j.actamat.2004.10.036 ↗
19. A physically based fatigue model for prediction of crack initiation from persistent slip bands in polycrystals10.1016/j.actamat.2010.09.036 ↗
20. Stm and surface analytical study of the effect of environment on fatigue crack initiation in silver single crystals ii: effects of oxygen partial pressure10.1016/0956-716X(90)90256-G ↗
21. Twin boundary: Stronger or weaker interface to resist fatigue cracking?10.1016/j.scriptamat.2012.01.028 ↗
22. Assessment of small fatigue crack growth driving forces in single crystals with and without slip bands10.1007/s10704-012-9726-y ↗
23. Use of atomic force microscopy to quantify slip irreversibility in a nickel-base superalloy10.1016/S1359-6462(03)00357-9 ↗
24. Low and high cycle fatigue-a continuum supported by AFM observations10.1016/S1359-6454(98)00169-4 ↗
25. Afm and sem-feg study on fundamental mechanisms leading to fatigue crack initiation10.1016/j.ijfatigue.2014.09.019 ↗
26. On slip band features and crack initiation in fatigued 316l austenitic stainless steel: part 1: analysis by electron back-scattered diffraction and atomic force microscopy10.1016/S0921-5093(01)01381-8 ↗
27. High-speed atomic force microscopy for materials science10.1080/09506608.2016.1156301 ↗
28. Deformation compatibility in a single crystalline ni superalloy10.1098/rspa.2015.0690 ↗
29. Self-assembled nanoparticle surface patterning for improved digital image correlation in a scanning electron microscope10.1007/s11340-013-9734-5 ↗
30. Plastic strain mapping with sub-micron resolution using digital image correlation10.1007/s11340-012-9685-2 ↗
31. High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy10.1016/j.actamat.2015.07.016 ↗
32. Characterisation of strain localisation processes during fatigue crack initiation and early crack propagation by SEM-DIC in an advanced disc alloy10.1016/j.msea.2017.05.091 ↗
33. Stable speckle patterns for nano-scale strain mapping up to 700circc10.1007/s11340-017-0317-8 ↗
34. Active slip system identification in polycrystalline metals by digital image correlation (DIC)10.1007/s11340-016-0217-3 ↗
35. An experimental study of the polycrystalline plasticity of lamellar titanium aluminide10.1016/j.ijplas.2019.02.013 ↗
36. Distortion correction protocol for digital image correlation after scanning electron microscopy: emphasis on long duration and ex-situ experiments10.1007/s11340-017-0303-1 ↗
37. Digital image correlation under scanning electron microscopy: methodology and validation10.1007/s11340-013-9782-x ↗
38. Correction of scanning electron microscope imaging artifacts in a novel digital image correlation framework10.1007/s11340-018-00469-w ↗
39. Advanced detector signal acquisition and electron beam scanning for high resolution SEM imaging10.1016/j.ultramic.2018.08.025 ↗
40. Correction of scan line shift artifacts in scanning electron microscopy: an extended digital image correlation framework10.1016/j.ultramic.2018.01.002 ↗
41. Crystal plasticity modelling and HR-DIC measurement of slip activation and strain localization in single and oligo-crystal ni alloys under fatigue10.1016/j.ijplas.2016.10.001 ↗
42. An experimental study of the polycrystalline plasticity of austenitic stainless steel10.1016/j.ijplas.2015.05.012 ↗
43. Characterisation of irradiation enhanced strain localisation in a zirconium alloy10.1016/j.mtla.2019.100248 ↗
44. Fatigue strain mapping via digital image correlation for ni-based superalloys: the role of thermal activation on cube slip10.1016/j.msea.2017.04.002 ↗
45. Measurements of plastic localization by heaviside-digital image correlation10.1016/j.actamat.2018.07.013 ↗
46. Impact of speckle pattern parameters on DIC strain resolution calculated from in-situ SEM experiments
47. DIC Development for the study of materials including multiple crossing cracks10.1007/s11340-014-9948-1 ↗
48. Crack analysis in mudbricks under compression using specific development of stereo-Digital image correlation
49. Shear-band capturing using a multiscale extended digital image correlation technique10.1016/j.cma.2007.06.019 ↗
50. Extended digital image correlation with crack shape optimization10.1002/nme.2070 ↗
51. Extended digital image correlation method for analysis of discrete discontinuity10.1016/j.optlaseng.2015.05.006 ↗
52. A novel “subset splitting” procedure for digital image correlation on discontinuous displacement fields10.1007/s11340-009-9220-2 ↗
53. Reed · 2006
54. Development and introduction of a damage tolerant high temperature nickel-base disk alloy
55. Lenthe · 2016 · 569
56. Crystallographic fatigue crack initiation in nickel-based superalloy rené 88DT at elevated temperature10.1016/j.actamat.2009.08.022 ↗
57. Divergence of mechanisms and the effect on the fatigue life variability of rene 88 dt
58. Fatigue crack initiation in nickel-based superalloy René 88 DT at 593∘C
59. On slip band features and crack initiation in fatigued 316l austenitic stainless steel: part 1: analysis by electron back-scattered diffraction and atomic force microscopy10.1016/S0921-5093(01)01381-8 ↗
60. Accurate reconstruction of EBSD datasets by a multimodal data approach using an evolutionary algorithm10.1016/j.matchar.2019.01.033 ↗
61. Quantitative analysis of surface effects of plastic deformation10.1016/S0921-5093(99)00447-5 ↗
62. Surface relief and internal structure in fatigued stainless sanicro 25 steel10.1007/s11661-016-3374-1 ↗
63. Low cycle fatigue behaviour of an aluminium alloy with small shearable precipitates: effect of surface coating10.1016/S0142-1123(00)00028-1 ↗
64. On the stability of orowan loops around coherent spherical ordered precipitates10.1016/0001-6160(89)90044-8 ↗
65. Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy10.1016/j.actamat.2012.01.049 ↗
66. Atomic force microscopy of slip lines on the surface of a fatigued nickel single crystal10.1080/095008398178732 ↗
67. The effect of grain size on the localization of plastic deformation in shear bands10.1016/j.scriptamat.2011.09.001 ↗
68. Crack initiation during high cycle fatigue of an austenitic steel10.1016/0956-7151(90)90305-Z ↗
69. Development of ultrasonic fatigue for rapid, high temperature fatigue studies in turbine engine materials
70. Crystallographic initiation of nickel-base superalloy IN100 at RT and 538c under low cycle fatigue conditions
71. Fatigue crack initiation in WASPALOY at 20 ∘c10.1007/s11661-007-9178-6 ↗
72. Mechanisms of fatigue crack nucleation
73. Fatigue crack initiation and early crack growth in copper polycrystals – effects of temperature and environment
74. Atomistic simulations of tension–compression asymmetry in dislocation nucleation for copper grain boundaries10.1016/j.commatsci.2008.03.041 ↗
75. Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy10.1016/j.cossms.2014.06.001 ↗
76. Modeling crack nucleation at coherent twin boundaries in nickel-based superalloys
77. The application of dislocation concepts in fatigue
78. Strain localization during fatigue of precipitation hardened aluminium alloys
79. Petrenec · 2014
80. Experimental evaluation of the cyclic slip irreversibility factor10.4028/www.scientific.net/KEM.465.223 ↗
81. Large scale 3-dimensional atomistic simulations of screw dislocations interacting with coherent twin boundaries in al, cu and ni under uniaxial and multiaxial loading conditions10.1016/j.actamat.2019.05.025 ↗
82. Low-temperature deformation of copper single crystals10.1063/1.1722824 ↗
83. In situ synchrotron x-ray imaging of high-cycle fatigue crack propagation in single-crystal nickel-base alloys10.1016/j.actamat.2011.04.042 ↗
84. 3d simulation of short fatigue crack propagation by finite element crystal plasticity and remeshing10.1016/j.ijfatigue.2015.05.022 ↗
85. Polycrystal orientation distribution effects on microslip in high cycle fatigue10.1016/S0142-1123(02)00057-9 ↗
86. Assessing reliability of fatigue indicator parameters for small crack growth via a probabilistic framework10.1088/1361-651X/aa6c45 ↗