Quantifying the grain boundary segregation strengthening induced by post-ECAP aging in an Al-5Cu alloy
Source abstract
Abstract
Abstract Hardening on annealing (HOA) has been frequently observed in nanostructured metals and alloys. For nanostructured materials obtained by severe plastic deformation (SPD), HOA has been attributed to the reduction of dislocation sources within grains and grain boundary relaxation during annealing. In the present work, it is shown that when a bimodal grain structured (a mixture of micron-sized and ultrafine grains) Al-5Cu alloy prepared by equal channel angular pressing (ECAP) was subjected to post-ECAP natural and artificial aging treatments, the alloy shows a completely different precipitation behavior with an accelerated precipitation kinetics. No coherent θ'' or semi-coherent θ' precipitates form in the bulk of grains, while a large fraction of stable incoherent θ precipitates form along high angle boundaries. After artificial aging at low temperatures for a short time, a significant improvement of both ultimate tensile strength and uniform elongation was achieved without sacrificing the yield strength. A systematic microstructure characterization by EBSD, TEM and APT has been carried out to investigate the evolution of grain size, dislocation density and solid solution level of Cu as well as the precipitation of Al-Cu precipitates during natural and artificial aging treatments. A quantitative evaluation of different supposed strengthening mechanisms revealed that the segregation of Cu elements at grain boundaries plays a more important role than grain boundary relaxation and the dislocation source-limited strengthening to compensate the yield strength reduction caused by the decrease in dislocation density and solute content of Cu in solid solution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
2. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
3. Effect of soft Bi particles on grain refinement during severe plastic deformation10.1016/S1003-6326(17)60114-6 ↗
4. Soft particles assisted grain refinement and strengthening of an Al-Bi-Zn alloy subjected to ECAP10.1016/j.msea.2017.07.064 ↗
5. Nano- and micro-scale free volume in ultrafine grained Cu–1wt.%Pb alloy deformed by equal channel angular pressing10.1016/j.actamat.2009.07.066 ↗
6. The evolution of homogeneity in processing by high-pressure torsion10.1016/j.actamat.2006.07.029 ↗
7. Influence of dislocation–solute atom interactions and stacking fault energy on grain size of single-phase alloys after severe plastic deformation using high-pressure torsion10.1016/j.actamat.2014.01.036 ↗
8. Experimental evidence for grain-boundary sliding in ultrafine-grained aluminum processed by severe plastic deformation10.1002/adma.200501232 ↗
9. Strengthening mechanisms in nanostructured aluminum10.1016/j.msea.2006.10.173 ↗
10. Tailoring dislocation structures and mechanical properties of nanostructured metals produced by plastic deformation10.1016/j.scriptamat.2009.02.018 ↗
11. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed10.1016/j.actamat.2009.05.017 ↗
12. Hardening by annealing and softening by deformation in nanostructured metals10.1126/science.1124268 ↗
13. Nanostructured aluminum and if steel produced by rolling-a comparative study10.2355/isijinternational.48.1080 ↗
14. Structural and mechanical properties of nanocrystalleve titanium processed by severe plastic deformation10.1016/S1359-6462(97)00210-8 ↗
15. The Hall-Petch relation in submicro-grained Al-1.5% Mg alloy10.1016/0956-716X(92)90405-4 ↗
16. Microstructures and hardness of ultrafine-grained Ni3Al10.1016/0956-7151(93)90110-E ↗
17. Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena10.1016/j.msea.2012.01.080 ↗
18. A scanning force microscopy study of grain boundary energy in copper subjected to equal channel angular pressing10.1016/j.actamat.2007.08.023 ↗
19. On the structure, stress fields and energy of nonequilibrium grain boundaries10.1016/0956-7151(93)90152-I ↗
20. Observations of grain boundary structure in submicrometer-grained Cu and Ni using high-resolution electron microscopy10.1557/JMR.1998.0057 ↗
21. Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing10.1016/j.actamat.2010.11.063 ↗
22. Effect of back pressure during equal-channel angular pressing on deformation-induced porosity in copper10.1016/j.scriptamat.2013.02.034 ↗
23. Short-circuit diffusion in an ultrafine-grained copper–zirconium alloy produced by equal channel angular pressing10.1016/j.actamat.2007.07.026 ↗
24. Combined volumetric, energetic and microstructural defect analysis of ECAP-processed nickel10.1016/j.actamat.2015.10.004 ↗
25. Microstructural evolution during the heat treatment of nanocrystalline alloys10.1557/JMR.2007.0403 ↗
26. Grain boundary stability governs hardening and softening in extremely fine nanograined metals10.1126/science.aal5166 ↗
27. Grain-boundary relaxation and its effect on plasticity in nanocrystalline Fe10.1063/1.2187417 ↗
28. Non-equilibrium grain boundary structure and inelastic deformation using atomistic simulations10.1016/j.ijplas.2010.09.011 ↗
29. Dislocation emission from deformation-distorted grain boundaries in ultrafine-grained materials10.1016/j.scriptamat.2013.12.012 ↗
30. Characterizing hardening on annealing of cold-rolled aluminum AA3103 strips10.1007/s11661-013-2064-5 ↗
31. Effects of annealing and impurities on tensile properties of electrodeposited nanocrystalline Ni10.1016/j.scriptamat.2004.08.015 ↗
32. Grain boundary relaxation strengthening of nanocrystalline Ni–W alloys10.1557/jmr.2012.55 ↗
33. Grain boundary-mediated plasticity in nanocrystalline nickel10.1126/science.1098741 ↗
34. Grain rotation mediated by grain boundary dislocations in nanocrystalline platinum
35. Experimental observations of stress-driven grain boundary migration10.1126/science.1178226 ↗
36. A maximum in the strength of nanocrystalline copper10.1126/science.1086636 ↗
37. Stabilizing nanostructures in metals using grain and twin boundary architectures10.1038/natrevmats.2016.19 ↗
38. Design of stable nanocrystalline alloys10.1126/science.1224737 ↗
39. Tailoring and patterning the grain size of nanocrystalline alloys10.1016/j.actamat.2006.08.032 ↗
40. Grain boundary segregation, chemical ordering and stability of nanocrystalline alloys: atomistic computer simulations in the Ni–W system10.1016/j.actamat.2007.03.024 ↗
41. Stability criteria for nanocrystalline alloys10.1016/j.actamat.2017.03.029 ↗
42. Grain boundary segregation and thermodynamically stable binary nanocrystalline alloys10.1103/PhysRevB.79.094112 ↗
43. The deformation and work hardening behaviour of a SPD processed Al-5Cu alloy10.1016/j.jallcom.2016.11.353 ↗
44. Influence of pre-ageing on the stretch formability of Al-Mg-Si automotive sheet alloys10.1016/j.msea.2017.05.009 ↗
45. Microstructure evolution and mechanical behavior of a binary Al–7Mg alloy processed by equal-channel angular pressing10.1016/j.actamat.2014.10.025 ↗
46. The formation of nanograin structures and accelerated room-temperature theta precipitation in a severely deformed Al–4wt.% Cu alloy10.1016/j.actamat.2009.11.008 ↗
47. Grain boundary precipitation in an Al-Cu alloy10.1016/0001-6160(68)90131-4 ↗
48. Anelastic relaxation peak associated with the presence of incoherent θ phase in Al-4wt.%Cu alloy10.1016/0921-5093(92)90122-H ↗
49. Solute clustering in Al–Cu–Mg alloys during the early stages of elevated temperature ageing10.1016/j.actamat.2010.05.020 ↗
50. Room temperature precipitation in quenched Al–Cu–Mg alloys: a model for the reaction kinetics and yield strength development10.1080/14786430412331333374 ↗
51. Plasticity and grain boundary diffusion at small grain sizes10.1002/adem.200900333 ↗
52. Absolute interfacial energies of [001] tilt and twist grain boundaries in copper10.1016/0001-6160(59)90198-1 ↗
53. Effect of recrystallization on diffusion in ultrafine-grained Ni10.1016/j.actamat.2014.02.002 ↗
54. Effect of annealing on percolating porosity in ultrafine-grained copper produced by equal channel angular pressing10.1016/j.actamat.2013.05.036 ↗
55. Grain boundary self-diffusion in polycrystalline nickel of different purity levels10.1016/j.actamat.2009.09.015 ↗
56. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
57. On the influence of temperature on the electric conducting-power of alloys10.1098/rstl.1864.0004 ↗
58. Influence of grain boundary state on electrical resistivity of ultrafine grained aluminium10.1080/14786435.2016.1204022 ↗
59. Mechanical and electrical properties of mechanically alloyed nanocrystalline Cu–Nb alloys10.1016/j.actamat.2006.03.021 ↗
60. Change in electrical resistivity of commercial purity aluminium severely plastic deformed10.1080/14786435.2010.510453 ↗
61. Calculation of electrical resistivity produced by dislocations and grain boundaries in metals10.1088/0953-8984/6/4/007 ↗
62. Estimation of solute Fe concentration in commercial pure aluminium10.4028/www.scientific.net/KEM.44-45.31 ↗
63. Mechanical stability and electrical conductivity of Cu–Ag filamentary microcomposites10.1016/S0921-5093(98)01097-1 ↗
64. Ultrafine grained copper alloy sheets having both high strength and high electric conductivity10.1016/j.matlet.2009.05.021 ↗
65. Microstructural evolution and service performance of cold-drawn pure aluminum conductor wires10.1016/j.jmst.2016.11.018 ↗
66. Microstructure and vacancy-type defects in high-pressure torsion deformed Al–Cu–Mg–Mn alloy10.1016/j.scriptamat.2009.04.027 ↗
67. Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization10.1016/S1359-6454(03)00160-5 ↗
68. The ageing and thermal recovery behaviour of Al-Mg-Cu alloys10.4028/www.scientific.net/MSF.396-402.1031 ↗
69. Nanostructured metals: less is more10.1038/nmat1671 ↗
70. Rapid hardening induced by electric pulse annealing in nanostructured pure aluminum10.1016/j.scriptamat.2011.10.023 ↗
71. On non-equilibrium grain boundaries and their effect on thermal and mechanical behaviour: a molecular dynamics computer simulation10.1016/S1359-6454(02)00195-7 ↗
72. On the origin of the extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation10.1016/j.scriptamat.2010.07.014 ↗
73. Hirth · 1968
74. Segregation of Mg, Cu and their effects on the strength of Al Σ5(210)[001] symmetrical tilt grain boundary10.1016/j.actamat.2017.12.023 ↗
75. Modelling grain boundary strengthening in ultra-fine grained aluminum alloys10.1016/j.msea.2005.08.121 ↗
76. Reaching theoretical strengths in nanocrystalline Cu by grain boundary doping10.1016/j.scriptamat.2011.06.048 ↗