Three-dimensional investigation of grain boundary–twin interactions in a Mg AZ31 alloy by electron backscatter diffraction and continuum modeling

Abstract The effect of grain boundary (GB) misorientation ( θ ) on twinning in a Mg AZ31 alloy is investigated using a three-dimensional (3-D) experimental and modeling approach, in which 3-D electron backscattered diffraction is performed in a volume consisting of a central grain, favorably oriented for twinning, and surrounded by three boundaries, with θ ranging from 15° to 64°. This study corroborates previous observations that twin nucleation and propagation are favored at low θ . Furthermore, it reveals that non-Schmid effects, such as the activation of low Schmid factor (SF) variants or of double tensile twins, are absent in the vicinity of low misorientation boundaries and that they become more abundant as θ increases. The 3-D morphology of individual twin variants is found to be related to their SF. High SF variants have well-established plate morphology, while low SF variants adopt irregular shapes. A crystal plasticity continuum model recently proposed by the authors is used in a very high intragrain resolution and large-scale finite element polycrystalline aggregate model of the experimental specimen. This model is shown to successfully capture the influence of θ on twin propagation and variant selection. It ultimately predicts (i) a rise in local non-basal slip with increasing θ , (ii) that low θ GB favor twin nucleation by non-Schmid stress concentrations, but that propagation is immediately accommodated by the macroscopic stress, and (iii) that high θ GB are not favorable twin nucleation sites, despite having high von Mises stress concentrations.