Oxide films in laser additive manufactured Inconel 718
Source abstract
Abstract
Abstract A continuous-wave 5 kW fiber laser welding system was used in conduction mode to deposit Inconel® alloy 718 (IN718) by employing filler wire on as-serviced IN718 parent material (PM) substrates. The direct laser deposited (DLD) coupons and as-serviced IN718 PM were then evaluated through tensile testing. To understand the failure mechanisms, the tensile fracture surfaces of the as-serviced IN718 PM, DLD and DLD-PM samples were analyzed using scanning electron microscopy. The fracture surfaces revealed the presence of both Al2O3 and Cr2O3 films, although the latter was reasoned to be the main oxide in IN718. Both the experimental observations and thermodynamic analysis indicated that oxidation of some alloying elements in IN718 cannot be completely avoided during manufacturing, whether in the liquid state under vacuum (for casting, the electron beam melting, welding and/or deposition) or with inert gas protection (for welding or laser deposition). The exposed surface of the oxide film on the fracture surface has poor wetting with the metal and thus can constitute a lack of bonding or a crack with either the metal and/or another non-wetted side of the oxide film. On the other hand, the wetted face of the oxide film has good atom-to-atom contact with the metal and may nucleate some intermetallic compounds, such as Laves, Ni3Nb-δ, Nb-rich MC and γ′ compounds. The potential of their nucleation on Cr2O3 was assessed using planar disregistry. Coherent planes were found between these intermetallics and Cr2O3.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Dupont · 2009
2. Pollock · J Propul Power · 2006 · 22 · 36110.2514/1.18239 ↗
3. Cornu · Weld Int · 1995 · 9 · 80210.1080/09507119509548898 ↗
4. Oblak · Metall Mater Trans B · 1974 · 5 · 14310.1007/BF02642938 ↗
5. Cozar · Metall Mater Trans B · 1973 · 4 · 4710.1007/BF02649604 ↗
6. Qi · Metall Mater Trans A · 2009 · 40A · 241010.1007/s11661-009-9949-3 ↗
7. Baufeld · J Mater Eng Perform · 2011 · 21 · 141610.1007/s11665-011-0009-y ↗
8. Blackwell · J Mater Process Technol · 2005 · 170 · 24010.1016/j.jmatprotec.2005.05.005 ↗
9. Zhang · Int J Adv Manuf Technol · 2013
10. Campbell · 1991
11. Rashid · Metall Mater Trans A · 2004 · 35A · 206310.1007/s11661-004-0155-z ↗
12. Campbell · Metall Mater Trans A · 2012 · 43B · 90210.1007/s11663-012-9655-1 ↗
13. Reed · 2008
14. , University of Cambridge.
15. Reynolds · Philos Trans R Soc London · 1883 · 174 · 93510.1098/rstl.1883.0029 ↗
16. Cao · Metall Mater Trans A · 2003 · 34A · 140910.1007/s11661-003-0253-3 ↗
17. Cao · Metall Mater Trans A · 2004 · 35A · 142510.1007/s11661-004-0251-0 ↗
18. Cao · Int J Cast Met Res · 2000 · 13 · 17510.1080/13640461.2000.11819400 ↗
19. Cao · Int J Cast Met Res · 2003 · 15 · 59510.1080/13640461.2003.11819546 ↗
20. Cao X, Campbell J. In: Venetti AC, editor. Prog Mater Sci; 2007.
21. Liu · J Mater Sci · 2012 · 47 · 429010.1007/s10853-012-6279-4 ↗
22. Liu · Metall Mater Trans A · 2013 · 44 · 68210.1007/s11661-012-1419-7 ↗
23. Richards · Scan Microsc · 1999 · 13 · 55
24. Bramfitt · Metall Trans · 1970 · 1 · 198710.1007/BF02642799 ↗
25. Wada · J Phys Soc Jpn · 1990 · 59 · 70110.1143/JPSJ.59.701 ↗
26. Dubitskii · Z Naturforsch B · 2006 · 61 · 154110.1515/znb-2006-1210 ↗
27. Fang · J Phys Condens Matter · 1992 · 4 · 240510.1088/0953-8984/4/10/007 ↗
28. Shee · J Alloys Compd · 1998 · 265 · 24910.1016/S0925-8388(97)00291-0 ↗
29. Kaufman · Scripta Mater · 1969 · 3 · 71510.1016/0036-9748(69)90220-8 ↗
30. Baster · J Alloys Compd · 2000 · 296 · 110.1016/S0925-8388(99)00511-3 ↗