Evolution of microstructure and deformation resistance in creep of tempered martensitic 9–12%Cr–2%W–5%Co steels
Source abstract
Abstract
Abstract The microstructural evolution during creep at 923 K of four tempered martensite 9–12%Cr-steels modified with 2%W and 5%Co was quantified by electron microscopy. Coarsening of subgrains with strain towards the stress dependent steady state was confirmed. The evolution of the precipitate structure is similar with regard to M23C6 (M: metallic element, X: N, C) and Laves phase (Fe,Cr)2(W,Mo) but differs strongly with regard to V-bearing precipitates. Low temper temperatures promote precipitation of V as M2X instead of VX. This appears to be critical in causing anomalously fast breakdown of initially high creep resistance. Dissolution of small V-bearing precipitates and corresponding loss of precipitation hardening in the subgrain interior is proposed to be the reason for this breakdown. The dissolution is caused by fast coarsening of M2X precipitates and precipitation of Z-phase at subgrain boundaries. Large M2X precipitates at subgrain boundaries are proposed to be nucleation sites of Z-phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Eggeler · Steel Res · 1987 · 58 · 9710.1002/srin.198701594 ↗
2. Blum · Steel Res · 1991 · 62 · 7210.1002/srin.199101253 ↗
3. Straub · VGB Kraftwerkstechnik · 1993 · 73 · 646
4. Henes · 1999 · 179
5. Weinert P. PhD thesis, Technische Universität Graz, Graz, Austria; 2001.
6. Hald J. In: Werkstoffe und Qualitätssicherung 2004, Dortmund, March 2004; VGB.
7. Qin · Mater Sci Eng A · 2003 · 341 · 21110.1016/S0921-5093(02)00215-0 ↗
8. Eggeler · Acta Metall · 1989 · 37 · 322510.1016/0001-6160(89)90194-6 ↗
9. Götz · 2001 · 155
10. Gustafson · Mater Sci Eng A · 2002 · 33 · 27910.1016/S0921-5093(01)01874-3 ↗
11. Chilukuru H, Blum W, Schwienheer M, Scholz A. In: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe, Beiträge zur 26. Vortragsveranstaltung der Arbeitsgemeinschaft für warmfeste Stähle und für Hochtemperaturwerkstoffe am 28. November in Düsseldorf, Stahlinstitut VDEh; 2003. p. 65–74.
12. Hald J, Straub S. In: Lecomte-Beckers J, Carton M, Schubert F, Ennis PJ, editors. Materials for advanced power engineering 1998, Proceedings of the 6th Liege conference, vol. 1, p. 155–69. European commission, Universite de Liege, Schriften des Forschungszentrum Jülich, Reihe Energietechnik/Energy Technology, vol. 5; 1998.
13. Abe · Curr Opin Solid State Mater Sci · 2004 · 8 · 30510.1016/j.cossms.2004.12.001 ↗
14. Agamennone R, Berger C, Blum W, Ehlers J, Granacher J, Inden G, et al. In: Lecomte-Beckers J, Carton M, Schubert F, Ennis PJ, editors, Materials for advanced power engineering 2002, Proceedings of the 7th Liege conference, vol. 3, p. 1279–89. European commission, Universite de Liege, Schriften des Forschungszentrum Jülich, Reihe Energietechnik/Energy Technology, vol. 21; 2002.
15. Knezevic · ISIJ Int · 2002 · 42 · 150510.2355/isijinternational.42.1505 ↗
16. Ennis · Acta Mater · 1997 · 4 · 490110.1016/S1359-6454(97)00176-6 ↗
17. Kloos · Materialprüfung · 1988 · 93
18. Berger · Z Metallkd · 2005 · 96 · 66810.3139/146.101086 ↗
19. Straub · 1995
20. Polcik P. Modellierung des Verformungsverhaltens der warmfesten 9–12% Chromstähle im Temperaturbereich von 550–650°C. D29 (Dissertation Universität Erlangen-Nürnberg). Shaker Verlag, Aachen; 1999.
21. Blum · Steel Res · 1999 · 70 · 27410.1002/srin.199905639 ↗
22. Agamennone R, Blum W. In: Ref. [14], vol. 2, p. 1161–71.
23. Götz · Mater Sci Eng A · 2003 · 34 · 20110.1016/S0921-5093(02)00684-6 ↗
24. Seibert T. Dipl.-Ing. thesis, University of Erlangen-Nürnberg, Erlangen, Germany; 2005.
25. Blum W, Straub S, Vogler S. In: Brandon DG, Chaim R, Rosen A, editors, Proceedings of the 9th international conference on the strength of metals and alloys (ICSMA 9), vol. I, London: Freund; 1991. p. 111–26.
26. Straub S, Blum W. In: McQueen HJ, Konopleva EV, Ryan ND, editors, Proceedings of the international symposium on hot workability of steels and light alloys – composites, Montréal; 1996. p. 189–203.
27. Polcik · 1995 · 313
28. Zeng XH, Blum W. In: Proceedings of the 29th MPA seminar, safety and reliability in energy technology, October 2003, Stuttgart; 2003.
29. Sedláček · Comput Mater Sci · 2002 · 2 · 20010.1016/S0927-0256(02)00264-1 ↗
30. Straub · Steel Res · 1995 · 66 · 39410.1002/srin.199501144 ↗
31. Maziasz · 1992 · 1125 · 1135
32. Sawada K, Kushima H, Kimura K. In: International workshop on performance and requirements of structural materials for modern high efficient power plants, Darmstadt; September 6–9, 2005. p. 96–104.
33. Abe F, Horiuchi T, Taneike M. In: Strang A, Conroy A, Banks WD, editors, Engineering issues in turbine machinery, power plant and renewables, Proceedings of the sixth international Charles Parsons turbine conference, Trinity College Dublin, Ireland, 16–18 September 2003. Parsons; 2003.
34. Hald · Steel Res · 1996 · 67 · 36910.1002/srin.199605503 ↗
35. Agamennone R. Unpublished work.
36. Suzuki · ISIJ Int · 2003 · 43 · 108910.2355/isijinternational.43.1089 ↗
37. Mayer KH. Technical report, April 2004.
38. Kimura K, Suzuki K, Kushima H, Abe F. In: Gladiš R, Jakobová A, Kuboň Z, Purmenský J, Filip M, Foldyna V, Sobotka J, editors, Proceedings of the 10th joint International conference on creep & fracture of engineering materials and structures, creep resistant metallic materials, 8–11 April 2001, p. 186–95, Prag, Czech Republic, 2001. Vitkovice-Research and Development and TERIS; 2002.
39. Seibert T, Durst K, Chilukuru H, Blum W, Göken M. In: Göken M, editor, 37. Praktische Metallographie Sonderbände – Fortschritte in der Metallographie, Erlangen, September 2005. DGM. p. 73.
40. Henes D, Straub S, Sailer T, Polcik P, Blum W, Mayer KH. In: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe, 20. Vortragsveranstaltung der Arbeitsgemeinschaft Warmfeste Stähle und der Arbeitsgemeinschaft Hochtemperaturwerkstoffe, 11.1997 Düsseldorf, Düsseldorf: Verein Deutscher Eisenhüttenleute; 1997. p. 42–55.
41. Abe · Mater Sci Eng A · 2001 · 319–321 · 77010.1016/S0921-5093(00)02002-5 ↗
42. Maruyama K, Lee JS. In: ECCC creep conference, London, September 2005. p. 372–9.
43. Danielsen H, Hald J. Technical report M4-313, Värmeforsk Service AB, 10153 Stockholm, February 2004.
44. Letofsky-Papst · Z Metallkd · 2004 · 95 · 1810.3139/146.017905 ↗
45. Chilukuru H. Microstructural investigation of tempered martensite steels; 1995. Unpublished.
46. Blum W, Chilukuru H. In: OPE 2006 – Chennai, international conference on pressure vessels and piping, Chennai; 2006.
47. Kimura · Scripta Metall · 1987 · 21 · 1910.1016/0036-9748(87)90399-1 ↗
48. Kimura · 2005 · 97
49. Sawada · Mater Sci Eng A · 2001 · 319–321 · 78410.1016/S0921-5093(01)00973-X ↗
50. Abe · 2002 · 341