In situ neutron diffraction investigation of the collaborative deformation–transformation mechanism in TRIP-assisted steels at room and elevated temperatures

Abstract The deformation behaviour of two transformation induced plasticity (TRIP)-assisted steels with slightly different microstructures due to different thermo-mechanically controlled processing (TMCP) was investigated by the in situ neutron diffraction technique during tensile straining at room temperature and two elevated (50 and 100 °C) temperatures. The essential feature of the TRIP deformation mechanism was found to be significant stress redistribution at the yield point. The applied tensile load is redistributed within the complex TRIP-steel microstructure in such a way that the retained austenite bears a significantly larger load than the ferrite–bainite α-matrix. The macroscopic yielding of the steel then takes place through the simultaneous cooperative activity of the austenite-to-martensite transformation in the austenite phase and plastic deformation in the α-matrix. It is concluded that, although its volume fraction is small, the martensitically transforming retained austenite phase dispersed within the α-matrix governs the plastic deformation of TRIP-assisted steels.