The effect of microstructure evolution on the mechanical properties of martensite ferritic steel during long-term aging
Source abstract
Abstract
Abstract The evolution of the microstructure and its effect on mechanical properties of a 10% Cr steel under long-term aging at 650 °C have been investigated. During short-term aging ( n m / h 1 / 3 ), rather than the increase in the ratio of brittle phase interfaces. The swallowing growth mechanism for Laves phase, growing by swallowing the adjacent M23C6 carbides, has been emphatically discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility10.1038/nature14144 ↗
2. Creep response and deformation processes in nanocluster-strengthened ferritic steels10.1016/j.actamat.2007.11.038 ↗
3. Ultrafine-grained nanocluster-strengthened alloys with unusually high creep strength10.1016/j.scriptamat.2009.06.034 ↗
4. On the effect of long-term creep on the microstructure of a 12% chromium tempered martensite ferritic steel10.1016/j.actamat.2009.07.010 ↗
5. Study of the microstructure of the Grade 91 steel after more than 100,000 h of creep exposure at 600°C10.1016/j.ijpvp.2010.03.017 ↗
6. The role of Laves phase on microstructure evolution and creep strength of novel 9% Cr heat resistant steels10.1016/j.intermet.2012.08.016 ↗
7. The influence of microstructural aspects on the service behaviour of advanced power plant steels10.2355/isijinternational.39.874 ↗
8. The effect of tungsten on dislocation recovery and precipitation behavior of low-activation martensitic 9Cr steels10.1007/BF02664988 ↗
9. On the contribution of carbides and micrograin boundaries to the creep strength of tempered martensite ferritic steels10.1016/j.actamat.2006.08.046 ↗
10. Effect of quenching, tempering, and cold rolling on creep deformation behavior of a tempered martensitic 9Cr-1W steel10.1007/s11661-003-0222-x ↗
11. Creep behavior and degradation of subgrain structures pinned by nanoscale precipitates in strength-enhanced 5 to 12 pct Cr ferritic steels10.1007/s11661-011-0726-8 ↗
12. Study on the nucleation and growth of M23C6 carbides in a 10% Cr martensite ferritic steel after long-term aging10.1016/j.matchar.2015.11.023 ↗
13. Creep-strengthening of steel at high temperatures using nano-sized carbonitride dispersions10.1038/nature01740 ↗
14. Creep behavior and stability of MX precipitates at high temperature in 9Cr–0.5Mo–1.8W–VNb steel10.1016/S0921-5093(01)00973-X ↗
15. Investigations on the growth kinetics of Laves phase precipitates in 12% Cr creep-resistant steels: experimental and DICTRA calculations10.1016/j.actamat.2010.07.033 ↗
16. Study on the nucleation and growth of Laves phase in a 10% Cr martensite ferritic steel after long-term aging10.1016/j.jallcom.2014.09.204 ↗
17. On the nucleation of Laves phase particles during high-temperature exposure and creep of tempered martensite ferritic steels10.1016/j.actamat.2014.08.008 ↗
18. The nucleation of Mo-rich Laves phase particles adjacent to M23C6 micrograin boundary carbides in 12% Cr tempered martensite ferritic steels10.1016/j.actamat.2015.01.027 ↗
19. Creep rates and strengthening mechanisms in tungsten-strengthened 9Cr steels10.1016/S0921-5093(00)02002-5 ↗
20. Causes of breakdown of creep strength in 9Cr–1.8W–0.5Mo–VNb steel10.1016/j.msea.2006.05.010 ↗
21. Aging phenomena before the precipitation of the bulky laves phase in Fe-10% Cr ferritic alloys10.1016/0956-716X(95)00086-B ↗
22. Metallurgy and creep properties of new 9-12% Cr steels10.1002/srin.199605503 ↗
23. Martensitic/ferritic super heat-resistant 650°C steels-Design and testing of model alloys10.2355/isijinternational.42.1505 ↗
24. Microstructure and long-term creep properties of 9–12% Cr steels10.1016/j.ijpvp.2007.06.010 ↗
25. The temporal evolution of the decomposition of a concentrated multicomponent Fe–Cu-based steel10.1016/j.actamat.2007.12.044 ↗
26. Influence of tempering on the microstructure and mechanical properties of HSLA-100 steel plates10.1007/s11661-001-0201-z ↗
27. Origin of copper precipitation strengthening in steel revisited10.1016/j.scriptamat.2005.02.034 ↗
28. Ostwald ripening in multicomponent alloys10.1016/j.actamat.2013.03.049 ↗
29. X-ray evaluation of dislocation density in ODS-Eurofer steel10.1016/j.msea.2011.11.051 ↗
30. Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel10.1016/j.actamat.2015.01.013 ↗
31. Compatible strain evolution in two phases due to epsilon martensite transformation in duplex TRIP-assisted stainless steels with high hydrogen embrittlement resistance10.1016/j.ijplas.2016.09.012 ↗
32. The effect of dislocation contrast on x-ray line broadening: a new approach to line profile analysis10.1063/1.117951 ↗
33. Characterization of the microstructure in random and textured polycrystals and single crystals by diffraction line profile analysis10.1016/j.msea.2010.08.059 ↗
34. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
35. A review of strain analysis using electron backscatter diffraction10.1017/S1431927611000055 ↗
36. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
37. Ferritic alloys with extreme creep resistance via coherent hierarchical precipitates10.1038/srep16327 ↗
38. Microstructural stability and long term creep strength of grade 91 steel10.1179/174892312X13269692038897 ↗
39. The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels10.1016/S1359-6454(03)00324-0 ↗
40. Dislocations in complex materials10.1126/science.1105962 ↗
41. Precipitate stability in creep resistant ferritic steels-experimental investigations and modelling10.2355/isijinternational.43.420 ↗
42. Nano-sized precipitate stability and its controlling factors in a NiAl-strengthened ferritic alloy
43. Mechanisms of subgrain coarsening and its effect on the mechanical properties of carbon-supersaturated nanocrystalline hypereutectoid steel10.1016/j.actamat.2014.10.027 ↗
44. Relationship between local deformation behavior and crystallographic features of as-quenched lath martensite during uniaxial tensile deformation10.1016/j.actamat.2009.06.021 ↗
45. Dislocations at γ/γ′ interfaces during the creep of nickel-base superalloys
46. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility10.1038/nmat3544 ↗
47. Microanalysis of two creep resistant 9–12% chromium steels10.1016/S0921-5093(98)00532-2 ↗
48. Precipitation behavior of laves phase and its effect on toughness of 9Cr-2Mo Ferritic-martensitic steel10.1016/S0022-3115(86)80083-6 ↗
49. Ternary laves phases with transition elements and silicon