Anomalous effects of strain rate on the room-temperature ductility of a cast Mg-Gd-Y-Zr alloy
Source abstract
Abstract
Abstract The loading rate significantly affects the mechanical properties of Mg alloys. However, the effects of strain rate on newly developed Mg–Gd–Y alloys at room temperature (RT) have rarely been investigated. Here, uniaxial tensile tests were conducted on a cast Mg-10Gd-3Y-0.5Zr (wt. %) alloy (GW103) in both as-aged and as-solutionized states with different grains sizes at RT and various strain rates. The results showed an anomalous positive strain-rate dependence of elongation in all the GW103 alloys investigated from 1 × 10−5 to 1 × 10−1 s−1. Careful microstructural characterization by slip trace analysis revealed that the exclusive deformation mechanism of pyramidal slip, non-Schmid behavior of basal slip, and slip transfer at 1 × 10−1 s−1; these induced the high RT ductility. The occurrence of pyramidal slip activity at high strain rates was suggested to be associated with rare earth solutes, fine precipitates, and local high stresses at grain boundaries due to dislocation pile-up. It was proposed that the increasing strain rate was approximately equivalent to decreases in grain size, enabling the generation of local stresses at grain boundaries, thus causing this anomalous phenomenon.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Strain rate sensitivity of the commercial aluminum alloy AA5182-O10.1016/j.msea.2004.08.029 ↗
2. Serrated flow and abnormal strain rate sensitivity of a magnesium–lithium alloy10.1016/j.matlet.2006.02.093 ↗
3. Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni10.1016/j.actamat.2006.02.013 ↗
4. Dieter · 1986
5. Grain boundaries and interfaces in slip transfer10.1016/j.cossms.2014.05.003 ↗
6. Effect of strain rate on tensile and work hardening properties for Al-Zn magnesium alloys10.1504/IJMATEI.2014.059487 ↗
7. Activating profuse pyramidal slips in magnesium alloys via raising strain rate to dynamic level10.1016/j.jallcom.2016.07.097 ↗
8. Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: characterization and modeling of the compressive yield stress10.1016/j.ijsolstr.2005.06.040 ↗
9. High strain rate superplasticity in friction stir processed Al–Mg–Zr alloy10.1016/S0921-5093(02)00824-9 ↗
10. Adiabatic heating at a dislocation pile-up avalanche10.1016/0001-6160(82)90131-6 ↗
11. Anomalous strain rate dependence of tensile ductility in moisture-embrittled Co 3 Ti alloys10.1557/JMR.2000.0273 ↗
12. Anomalous strain-rate effect on plasticity of a Mo–Re alloy at room temperature10.1016/j.msea.2007.08.031 ↗
13. Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP10.1016/S1359-6454(03)00118-6 ↗
14. Low-temperature superplasticity in nanostructured nickel and metal alloys10.1038/19486 ↗
15. An abnormal strain rate effect on tensile behavior in nanocrystalline copper10.1016/S1359-6462(01)01138-1 ↗
16. Anomalous effect of strain rate on the tensile elongation of coarse-grained pure iron with grain boundary micro-voids10.4028/www.scientific.net/AMR.214.334 ↗
17. Mordike · Magnes., Mater. Sci. Eng.: A · 2001 · 302 · 3710.1016/S0921-5093(00)01351-4 ↗
18. Effect of strain rate on deformation behaviour of a Mg–8.5 Li–1Zn alloy sheet at room temperature10.1016/S0921-5093(99)00221-X ↗
19. Aging characteristics and high temperature tensile properties of Mg-Gd-Y-Zr alloys10.2320/matertrans.42.1206 ↗
20. Microstructure and strengthening mechanism of high strength Mg–10Gd–2Y–0.5 Zr alloy10.1016/j.jallcom.2006.03.015 ↗
21. Effect of Y for enhanced age hardening response and mechanical properties of Mg–Gd–Y–Zr alloys10.1016/j.msea.2006.11.096 ↗
22. Effect of heat treatment on microstructures and mechanical properties of sand-cast Mg-10Gd-3Y-0.5 Zr magnesium alloy10.1016/S1003-6326(14)63102-2 ↗
23. {11-22}< 1123> Slip system in magnesium10.1016/0001-6160(73)90141-7 ↗
24. The origins of high hardening and low ductility in magnesium10.1038/nature15364 ↗
25. Microstructure and mechanical properties in an AZ31 magnesium alloy sheet fabricated by asymmetric hot extrusion10.1016/j.msea.2008.06.015 ↗
26. The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys10.1016/S1359-6454(03)00005-3 ↗
27. Understanding the high temperature reversed yield asymmetry in a Mg-rare earth alloy by slip trace analysis10.1016/j.actamat.2017.12.021 ↗
28. Effect of precipitate shape on slip and twinning in magnesium alloys10.1016/j.actamat.2010.11.060 ↗
29. The effect of high yttrium solute concentration on the twinning behaviour of magnesium alloys10.1016/j.actamat.2014.09.022 ↗
30. Pekguleryuz · 2013
31. Super-formable pure magnesium at room temperature10.1038/s41467-017-01330-9 ↗
32. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys10.1016/j.actamat.2010.08.031 ↗
33. The relation between ductility and stacking fault energies in Mg and Mg–Y alloys10.1016/j.actamat.2012.02.006 ↗
34. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y10.1016/S1359-6454(01)00297-X ↗
35. First-principles calculations of stacking fault energies in Mg-Y, Mg-Al and Mg-Zn alloys and implications for activity10.1016/j.actamat.2017.06.062 ↗
36. Comprehensive first-principles study of stable stacking faults in hcp metals10.1016/j.actamat.2016.10.042 ↗
37. Effect of solute atoms on dislocation motion in Mg: an electronic structure perspective10.1038/srep08793 ↗
38. Enhanced strength and ductility due to microstructure refinement and texture weakening of the GW102K alloy by cyclic extrusion compression10.1016/j.jmst.2016.01.004 ↗
39. Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation10.1016/S0921-5093(00)01660-9 ↗
40. Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure10.1016/S1359-6462(01)00996-4 ↗
41. Precipitation in a Mg–10Gd–3Y–0.4Zr (wt.%) alloy during isothermal ageing at 250°C10.1016/j.jallcom.2005.11.046 ↗
42. Microstructure and strengthening mechanisms of a cast Mg–1.48Gd–1.13Y–0.16Zr (at.%) alloy10.1007/s10853-009-3672-8 ↗
43. Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling10.1016/j.actamat.2006.05.018 ↗
44. Asymmetry strain hardening behavior in Mg-3% Al-1% Zn and Mg-8% Gd-3% Y alloy tubes10.1016/j.matlet.2013.06.007 ↗
45. Analysis of the deformation behavior of magnesium-rare earth alloys Mg-2 pct Mn-1 pct rare earth and Mg-5 pct Y-4 pct rare earth by in situ energy-dispersive X-ray synchrotron diffraction and elasto-plastic self-consistent modeling10.1007/s11661-014-2533-5 ↗
46. Transmission electron microscopy investigation of 〈c+a〉 dislocations in Mg and α-solid solution Mg-Li alloys10.1007/s11661-002-0154-x ↗
47. In-situ analysis of the slip activity during tensile deformation of cast and extruded Mg-10Gd-3Y-0.5 Zr (wt.%) at 250 °C10.1016/j.matchar.2016.04.001 ↗
48. Caillard · 2003
49. Microscopic deformation compatibility during monotonic loading in a Mg-Gd-Y alloy10.1016/j.matchar.2016.08.003 ↗
50. Compatibility of deformation in two-phase Ti-Al alloys: dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
51. Prominent role of basal slip during high-temperature deformation of pure Mg polycrystals10.1016/j.actamat.2014.11.013 ↗
52. Effect of grain size on slip activity in pure magnesium polycrystals10.1016/j.actamat.2014.10.001 ↗
53. Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium10.1016/j.actamat.2015.01.032 ↗
54. Microplasticity-based rationalization of the room temperature yield asymmetry in conventional polycrystalline Mg alloys10.1016/j.actamat.2016.02.023 ↗
55. Classification of the critical resolved shear stress in the hexagonal-close-packed materials by atomic simulation: application to α-zirconium and α-titanium10.1063/1.3599870 ↗
56. Twinning and the ductility of magnesium alloys: Part I: “Tension” twins10.1016/j.msea.2006.12.037 ↗
57. Yu · 2012
58. The activation of non-basal slip in Magnesium alloys10.1007/s10853-012-6344-z ↗
59. Hardening mechanism of commercially pure Mg processed by high pressure torsion at room temperature10.1016/j.msea.2014.09.068 ↗
60. Mechanism of strain rate effect based on dislocation theory10.1088/0256-307X/26/3/036103 ↗