Synergistic effect of ultrasonic melt treatment and fast cooling on the refinement of primary Si in a hypereutectic Al–Si alloy
Source abstract
Abstract
Abstract A mechanism describing the synergistic effect of ultrasonic melt treatment (UST) and subsequent fast cooling on the refinement of primary Si particles in a hypereutectic Al−Si alloy was investigated by examining inoculant particles via high-resolution transmission electron microscopy, serial sectioning, and melt filtration. The application of UST activated non-wetting MgAl2O4 particles with diameters of ∼0.5 μm to nucleate the primary Si phase. The cavitation-enhanced wetting of MgAl2O4 particles caused the formation of the AlP phase at the MgAl2O4 interface, further improving the nucleation potential. The cavitation-enhanced wetting and dispersion of inclusions (such as MgAl2O4) also resulted in the refinement and de-agglomeration of AlP particles. The UST-induced changes to the inoculant particles ultimately increased their number density, and the observed effects became more pronounced after increasing the degree of undercooling up to 20 K, leading to enhanced refinement of primary Si particles at higher cooling rates (up to 102 K s−1).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Effect of composition and processing route on the wear behaviour of Al–Si alloys10.1016/S1359-6462(02)00020-9 ↗
2. Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al–Si alloys10.1038/srep25244 ↗
3. Aluminum phosphide as a eutectic grain nucleus in hypoeutectic Al–Si alloys10.1093/jmicro/dfh048 ↗
4. Morphologies of primary silicon in hypereutectic Al–Si alloys with melt overheating temperature and cooling rate10.1016/j.msea.2006.07.088 ↗
5. Cooling rate and microstructure of rapidly solidified Al–20 wt%Si alloy10.1016/j.msea.2005.10.040 ↗
6. Industrial application of ultrasonic vibrations to improve the structure of Al–Si hypereutectic alloys: potential and limitations10.1007/s11661-015-2829-0 ↗
7. Combined effects of ultrasonic melt treatment, Si addition and solution treatment on the microstructure and tensile properties of multicomponent Al–Si alloys10.1016/j.jallcom.2016.09.006 ↗
8. Ultrasonic refinement of magnesium by cavitation: clarifying the role of wall crystals10.1016/j.jcrysgro.2009.04.036 ↗
9. A refining mechanism of primary Al3Ti intermetallic particles by ultrasonic treatment in the liquid state10.1016/j.actamat.2016.06.056 ↗
10. Refinement of primary silicon in casting aluminum alloys via application of ultrasonic vibrations to DC process
11. Phosphorus in Al–Si cast alloys: thermodynamic prediction of the AlP and eutectic (Si) solidification sequence validated by microstructure and nucleation undercooling data10.1016/j.actamat.2014.02.042 ↗
12. Heterogeneous nucleation on potent spherical substrates during solidification10.1016/j.actamat.2006.09.016 ↗
13. The effect of the size distribution of inoculant particles on as-cast grain size in aluminium alloys10.1016/j.actamat.2004.04.035 ↗
14. Influence of ultrasonic melt treatment on the formation of primary intermetallics and related grain refinement in aluminum alloys10.1007/s10853-011-5463-2 ↗
15. Eskin · 1998
16. Compressibility and structure factors at zero wavevector of liquid aluminium-silicon alloys
17. Effect of grain refining and Sr modification on prefill measurement sensitivity in 356 alloys using electron probe microanalysis technique10.1179/136404604225014837 ↗
18. Serial sectioning and reconstruction techniques for three-dimensional microscopy of metallic materials10.3365/KJMM.2016.54.9.698 ↗
19. Improved mechanical properties of near-eutectic Al–Si piston alloy through ultrasonic melt treatment10.1016/j.msea.2016.05.087 ↗
20. Effect of transition elements on the microstructure and tensile properties of Al–12Si alloy cast under ultrasonic melt treatment10.1016/j.jallcom.2017.04.084 ↗
21. Solubility and precipitation of AlP in Al–Si melts studied with a temperature controlled filtration technique10.1016/S0925-8388(98)00686-0 ↗
22. The effect of cooling rate on the dendritic spacing and morphology of Ag3Sn intermetallic particles of a SnAg solder alloy10.1016/j.matdes.2010.12.046 ↗
23. Cellular growth during transient directional solidification of Pb–Sb alloys10.1016/j.jallcom.2005.12.011 ↗
24. Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al–Mg alloys10.1016/j.actamat.2011.11.044 ↗
25. Oxidation of molten Al−Mg alloys10.2320/matertrans1960.24.613 ↗
26. Oxidation of aluminium alloy melts and inoculation by oxide particles10.1007/s12666-012-0194-x ↗
27. Kinetic study of the reaction between copper (I) chloride and commercial silicon and silicides10.1007/BF01142049 ↗
28. Epitaxial relations between in situ superconducting YBa2Cu3O7-x thin films and BaTiO3/MgAl2O4/Si substrates10.1063/1.346607 ↗
29. Crystalline oxides on silicon10.1002/adma.200904306 ↗
30. Cavitation erosion mechanism of titanium alloy radiation rods in aluminum melt10.1016/j.ultsonch.2015.12.009 ↗
31. Solid-liquid interface energy between silicon crystal and silicon–aluminum melt10.1007/s11661-010-0217-3 ↗
32. Determination of latent heat and changes in solid fraction during solidification of Al–Si alloys by the CA-CCA method10.1080/13640461.1998.11819247 ↗
33. Saunders · 1998
34. An approach to assessing ultrasonic attenuation in molten magnesium alloys10.1063/1.3054374 ↗
35. Effects of ultrasonic vibration on the microstructure and mechanical properties of high alloying TiAl10.1038/srep41463 ↗