On the nature of γ′ phase cutting and its effect on high temperature and low stress creep anisotropy of Ni-base single crystal superalloys

Abstract The creep anisotropy of the single crystal superalloy LEK 94 deformed in tension along [0 0 1] and [1 1 0] directions at 1293 K and 160 MPa was investigated. Elementary microstructural processes which are responsible for a higher increase in creep rates with strain during [1 1 0] as compared to [0 0 1] tensile loading were identified. [1 1 0] tensile creep is associated with a higher number of γ′ phase cutting events, where two dislocations with equal Burgers vectors of type 〈1 1 0〉 jointly shear the γ′ phase. The resulting 〈2 2 0〉-type superdislocation can move by glide. In contrast, during [0 0 1] tensile loading, two dislocations with different 〈1 1 0〉-type Burgers vectors must combine for γ′ phase cutting. The resulting 〈2 0 0〉-type superdislocations can only move by a combination of glide and climb. The evolution of dislocation networks during creep determines the nature of the γ′ phase cutting events. The higher [1 1 0] creep rates at strains exceeding 2% result from a combination of a higher number of cutting events (density of mobile dislocations in γ′) and a higher superdislocation mobility (〈2 2 0〉 glide) in the γ′ phase.