A novel type of Co–Ti–Cr-base γ / γ ′ superalloys with low mass density
Source abstract
Abstract
A γ ′ strengthened Co–Ti–Cr superalloy is presented with a mass density ∼ 14 % below that of typical Co–Al–W-based alloys. The lattice misfit is sufficiently low to form coherent cuboidal γ ′ precipitates. Atom probe tomography shows that Cr partitions to the γ phase, but increases the γ ′ volume fraction compared to a binary Co-Ti alloy to more than 60 %. The solubility of Cr in the γ ′ phase is significantly higher than expected from previously published values. The γ ′ solvus temperature is above 1100 °C. The yield strength shows a distinct increase above 600 °C surpassing that of Co–9Al–8W (at.%) and conventional Co-base superalloys, even more so when it is normalized by the mass density.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Cobalt-base high-temperature alloys10.1126/science.1121738 ↗
2. Lee · 1971
3. Microstructure and creep strength of different γ/γ′-strengthened Co-base superalloy variants10.1016/j.scriptamat.2010.08.036 ↗
4. New Co-based γ-γ′ high-temperature alloys10.1007/s11837-010-0013-y ↗
5. Quaternary alloying effects and the prospects for a new generation of Co-Base superalloys
6. Effects of alloying elements on physical and mechanical properties of Co-Al-W-Based L12/fcc two-phase alloys10.4028/www.scientific.net/MSF.783-786.1195 ↗
7. L12-Strengthened cobalt-base superalloys10.1146/annurev-matsci-070214-021043 ↗
8. High-temperature strength and deformation of γ/γ′ two-phase Co-Al-W-base alloys10.1016/j.actamat.2007.11.014 ↗
9. The stability of γ′-Co3(Al,W) phase in Co-Al-W ternary system10.4028/www.scientific.net/MSF.654-656.448 ↗
10. The effects of alloying elements (Ta, Hf) on the thermodynamic stability of γ′-Co3 (Al,W) phase10.1016/j.intermet.2012.06.006 ↗
11. Creep strength and microstructure of polycrystalline γ′-strengthened Cobalt-base superalloys
12. Diffusion of solutes in fcc cobalt investigated by diffusion couples and first principles kinetic Monte carlo10.1016/j.actamat.2016.01.028 ↗
13. Co-base alloys
14. Alloy design for aircraft engines10.1038/nmat4709 ↗
15. Refractory metals and intermetallic precipitates in cobalt-chromium alloys
16. Verbesserung hitzebeständiger Kobaltlegierungen durch Aushärtung
17. Aushärtung von Kobalt-Chrom-Tantal-Legierungen
18. Über Stabilität und Ausscheidung der Co3Ti-Phase in Kobalt-Titan-Legierungen
19. New L12 ordered alloys having the positive temperature dependence of strength10.2320/matertrans1960.21.237 ↗
20. M. N. Thompson, J. W. Edington, High temperature mechanical properties and deformation modes in a precipitation hardened Co-Ti alloy, in: Proc. 2nd Int. Conf. Strength of Metals and Alloys, vol. 3, pp. 1150–1154.
21. The Co-Ti (Cobalt-Titanium) system10.1007/BF02873414 ↗
22. Murray · 1987
23. Gefüge und Eigenschaften von CM-7, einer schmied- und aushärtbaren Kobaltlegierung
24. A new Co-Base superalloy strengthened by γ′ phase10.2320/matertrans.47.2099 ↗
25. Allotropic transformation induced stacking faults and discontinuous coarsening in a γ-γ′ Co-base alloy10.1016/j.intermet.2014.12.013 ↗
26. Stability of the γ′-Co3 Ti compound in simple and complex cobalt alloys
27. 2000
28. An X-ray study of creep-deformation induced changes of the lattice mismatch in the γ′-hardened monocrystalline Nickel-base superalloy SRR 9910.1016/0956-7151(91)90095-I ↗
29. Lukas · 2007
30. Computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
31. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
32. Effect of Ruthenium on the precipitation of topologically close packed phases in Ni-based superalloys of 3rd and 4th generation10.1016/j.actamat.2015.05.033 ↗
33. Advanced scale bridging microstructure analysis of single crystal Ni-base superalloys10.1002/adem.201400136 ↗
34. Effects of Ru on elemental partitioning and precipitation of topologically close-packed phases in Ni-based superalloys10.1016/j.scriptamat.2015.01.014 ↗
35. Microstructural evolution of a Ni-based superalloy (617B) at 700 °C studied by electron microscopy and atom probe tomography10.1016/j.actamat.2011.11.020 ↗
36. Mechanical properties and lattice misfit of γ/γ′ strengthened Co-base superalloys in the Co–W–Al–Ti quaternary system10.1016/j.intermet.2014.07.006 ↗
37. Elastic constants of face-centered-cubic cobalt10.1063/1.371647 ↗
38. Kittel · 2005
39. Microstructure, lattice misfit, and high-temperature strength of γ′-strengthened Co-Al-W-Ge model superalloys10.1007/s11661-016-3408-8 ↗
40. New boron and silicon free single crystal-diffusion brazing alloys
41. The Co-Cr-Ti system (Cobalt-Chromium-Titanium)10.1361/105497101770339292 ↗
42. Livshits · J. Inorg. Chem. · 1958 · 3 · 193
43. Izv. Vyssh. Ucheb. Zaved
44. Alloying behavior of Co3Ti10.1007/BF02650125 ↗
45. The effects of different alloying elements on the thermal expansion coefficients, lattice constants and misfit of nickel-based superalloys investigated by X-ray diffraction
46. Elemental partitioning, lattice misfit and creep behaviour of Cr containing γ′ strengthened Co base superalloys10.1179/1743284715Y.0000000112 ↗
47. Elemental partitioning and mechanical properties of Ti- and Ta-containing Co–Al–W-base superalloys studied by atom probe tomography and nanoindentation10.1016/j.actamat.2014.06.020 ↗
48. Intermediate Co/Ni-Base model superalloys - thermophysical properties, creep and oxidation10.1016/j.scriptamat.2015.09.018 ↗
49. The importance of sign and magnitude of γ/γ′ lattice misfit in superalloys–with special reference to the new γ′-hardened cobalt-base superalloys10.1016/j.actamat.2014.08.005 ↗
50. Creep and directional coarsening in single crystals of new γ–γ′ Cobalt-base alloys10.1016/j.scriptamat.2012.01.008 ↗
51. Creep-Induced planar defects in L12-containing Co- and CoNi-base single-crystal superalloys10.1016/j.actamat.2014.08.033 ↗