Microstructural evolution and magnetic properties of binder jet additive manufactured Ni-Mn-Ga magnetic shape memory alloy foam
Source abstract
Abstract
Abstract This study investigated microstructural evolution, phase transformation and magnetic behavior of additively manufactured magnetic shape memory alloy foam. Pre-alloyed angular Ni-Mn-Ga ball-milled powder was binder jet printed and sintered at 1020 °C for 4 h in both vacuum and argon atmospheres. Porosity of the manufactured foams was studied using micro-computed x-ray tomography and it was found that the relative density of the sintered parts was about 50–60%. In the printed sample that was sintered in argon, electron microscopy with elemental analysis showed no compositional gradient. X-ray diffraction indicated that 10M modulated martensite was present in the pre-alloyed powder as well as the sample sintered in argon. Differential scanning calorimetry and thermomagnetic results showed that martensitic transformation of the sample sintered in argon was at 34 °C, while barely detectable in the sample sintered in vacuum. Saturation magnetization of the printed sample sintered in argon atmosphere was around 68.4 Am2/kg. Production of a magnetic shape memory alloy by printing would enable complex-shaped elements for demanding applications, and intentionally including porosity could allow these polycrystals to exhibit the magnetic shape memory effect. Therefore, a facile method for sintering of Ni–Mn–Ga printed parts has been presented for the first time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Influence of Mn incorporation for Ni on the magnetocaloric properties of rapidly solidified off-stoichiometric NiMnGa ribbons10.1016/j.jmmm.2015.08.102 ↗
2. Ferromagnetic shape memory alloys—challenges, applications, and experimental characterization10.1007/s40799-016-0098-5 ↗
3. Increasing magnetoplasticity in polycrystalline Ni-Mn-Ga by reducing internal constraints through porosity10.1103/PhysRevLett.99.247201 ↗
4. A magnetic shape memory micropump: contact-free, and compatible with PCR and human DNA profiling10.1088/0964-1726/21/11/115020 ↗
5. Characterization of a high-resolution solid-state micropump that can be integrated into microfluidic systems10.1007/s10404-014-1524-6 ↗
6. Effects of surface roughness and training on the twinning stress of Ni–Mn–Ga single crystals10.1016/j.actamat.2010.03.031 ↗
7. Double twinning in Ni-Mn-Ga-Co10.1016/j.actamat.2009.12.051 ↗
8. Composition and temperature dependence of the crystal structure of Ni–Mn–Ga alloys10.1063/1.1748860 ↗
9. Large magnetic-field-induced strains in Ni2MnGa single crystals10.1063/1.117637 ↗
10. Crystal structure and transformation behavior of Ni–Mn–Ga martensites10.1016/j.scriptamat.2006.01.033 ↗
11. Effect of Mn incorporation for Ni on the properties of melt spun off-stoichiometric compositions of NiMnGa alloys10.1016/j.jmmm.2010.12.035 ↗
12. Microstructure and properties of Ni–Mn–Ga alloys produced by rapid solidification and pulsed electric current sintering10.1016/j.jallcom.2011.02.166 ↗
13. Microstructure and magnetic properties of melt spinning Ni-Mn-Ga10.1016/j.intermet.2012.08.021 ↗
14. Martensitic transformation, mechanical property and magnetic-field-induced strain of Ni-Mn-Ga alloy fabricated by spark plasma sintering10.1016/j.jallcom.2011.01.001 ↗
15. Grain size effect on martensitic transformation, mechanical and magnetic properties of Ni-Mn-Ga alloy fabricated by spark plasma sintering10.1016/j.jallcom.2011.11.077 ↗
16. Magnetic field induced strain and damping behavior of Ni-Mn-Ga particles/epoxy resin composite10.1016/j.jallcom.2014.03.100 ↗
17. Microstructure, phase transformation and mechanical property of Ni-Mn-Ga particles/Mg composites10.1016/j.msea.2014.07.045 ↗
18. Effect of enhanced interfacial reaction on the microstructure, phase transformation and mechanical property of Ni–Mn–Ga particles/Mg composites10.1016/j.matdes.2015.05.051 ↗
19. Properties of the pulsed electric current sintered Ni-Mn-Ga-Co-WC composites10.1016/j.jallcom.2015.09.251 ↗
20. Phase structure and magnetic properties of the annealed Mn-rich Ni-Mn-Ga ferromagnetic shape memory thin films10.1016/j.materresbull.2014.10.008 ↗
21. The effect of the deposition rate on the crystallographic texture, microstructure evolution and magnetic properties in sputter deposited Ni-Mn-Ga thin films10.1016/j.tsf.2016.08.033 ↗
22. Self-patterning of epitaxial Ni-Mn-Ga/MgO(001) thin films10.1016/j.actamat.2016.03.065 ↗
23. Giant magnetic-field-induced strains in polycrystalline Ni-Mn-Ga foams10.1038/nmat2527 ↗
24. Magnetic-field-induced recovery strain in polycrystalline Ni-Mn-Ga foam10.1063/1.3524503 ↗
25. Recent developments in Ni-Mn-Ga foam Research10.4028/www.scientific.net/MSF.635.119 ↗
26. Temperature variation of structure and magnetic properties of Ni-Mn-Ga magnetic shape memory alloys10.1016/S0304-8853(01)01087-3 ↗
27. Magnetic properties and domain structure of magnetic shape memory Ni-Mn-Ga alloy10.1016/S0304-8853(00)01170-7 ↗
28. Effect of ball milling and post-annealing on magnetic properties of Ni49.8Mn28.5Ga21.7 alloy powders10.1016/j.intermet.2008.08.002 ↗
29. Powder bed binder jet printed alloy 625: densification, microstructure and mechanical properties10.1016/j.matdes.2016.06.067 ↗
30. Effect of solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed nickel-based superalloy 62510.1016/j.matdes.2016.08.083 ↗
31. Brief data overview of differently heat treated binder jet printed samples made from argon atomized alloy 625 powder10.1016/j.dib.2016.09.042 ↗
32. Microstructural evolution and mechanical properties of differently heat-treated binder jet printed samples from gas- and water-atomized alloy 625 powders10.1016/j.actamat.2016.11.021 ↗
33. Data on the densification during sintering of binder jet printed samples made from water- and gas-atomized alloy 625 powders10.1016/j.dib.2016.11.078 ↗
34. Chemical ordering in Ni-Mn-Ga Heusler alloys10.1016/S1359-6462(99)00080-9 ↗
35. Effect of Mn substitution on structural and magnetic properties of ferromagnetic shape memory alloys10.1080/15376494.2015.1022638 ↗
36. Formation temperature thin plate martensite and growth behavior of in Fe-Ni-C alloys10.2320/matertrans1960.16.35 ↗
37. Durlu · 1996 · Vol. 15 · 11
38. The crystallography and growth of partially-twinned martensite plates in Fe-Ni alloys10.1016/0001-6160(66)90094-0 ↗
39. Relationship between martensitic plate size and austenitic grain size in martensitic transformations10.1063/1.4922195 ↗
40. Phase transformation and magnetic property of Ni-Mn-Ga powders prepared by dry ball milling10.1007/s11665-012-0365-2 ↗
41. Ab initio and monte carlo approaches for the Magnetocaloric Effect in Co- and in-doped Ni-Mn-Ga Heusler alloys10.3390/e16094992 ↗
42. Phase equilibria and composition dependence of martensitic transformation in Ni-Mn-Ga ternary system10.1016/j.intermet.2011.12.009 ↗
43. Effect of composition on transformation temperatures of Ni-Mn-Ga shape memory alloys10.1016/S0167-577X(03)00305-7 ↗
44. Magnetic-field-induced strains in polycrystalline Ni-Mn-Ga at room temperature10.1016/S1359-6462(00)00610-2 ↗
45. Martensite transformation in Ni-Mn-Ga ferromagnetic shape-memory alloys10.1007/s11661-007-9097-6 ↗
46. Characterization of gas atomized Ni-Mn-Ga powders10.1016/j.matpr.2015.07.422 ↗
47. Microstructure, phase transformation and mechanical property of Nb-doped Ni-Mn-Ga alloys10.1016/j.intermet.2015.04.015 ↗
48. Phase transition of Ni-Mn-Ga alloy powders prepared by vibration ball milling10.1016/j.jallcom.2011.01.104 ↗
49. Giant magnetic-field-induced strain in NiMnGa seven-layered martensitic phase10.1063/1.1458075 ↗
50. Empirical mapping of Ni-Mn-Ga properties with composition and valence electron concentration10.1063/1.1453943 ↗