The microstructure of lath martensite in quenched 9Ni steel

Abstract Many of the most useful structural steels have dislocated lath martensitic structures. The microstructures of these steels are complex since each prior austenite grain contains as many as 24 different crystallographic variants of the γ(fcc)–α′(bcc) transformation. Recent research, using electron backscatter diffraction (EBSD), has significantly clarified the “block-and-packet” structure of lath martensite in low-carbon steel. The blocks are bivariant composites of two transformation variants, with the three distinct blocks stacked so that all six of the possible variants of the packet are used. The present work was undertaken to complete the description of this structure and identify its underlying causes. We address these issues in two steps. First, we present an EBSD characterization of lath martensite in low-carbon 9Ni steel. The results show that all packets have the bivariant block structure, and, with the proper notation, the full hierarchical structure has a simple pattern that is easily described and visualized. The results are readily explained on the basis of two assumptions: (i) the bivariant block, in contrast to a single-variant block, has an α′–γ invariant plane very near {0 1 1} α″ ||{1 1 1} γ , which permits the plate-shaped blocks to stack without significant strain to form a packet; (ii) the transformation goes to completion, with the consequence that the net strain in the prior austenite grain is a simple dilatation, and polygranular bodies can transform martensitically without significant residual stress. In a companion paper we use an appropriate modification of the crystallographic theory of lath martensite to validate the first of these assumptions.