Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure
Source abstract
Abstract
The development of steels with a combination of high strength, ductility, and toughness has been highly desirable for structural applications. Here we achieve high fracture toughness (129 MPa m ½ ) in a high-strength (∼1.5 GPa yield strength) and ductile (∼37% uniform elongation) austenitic stainless steel. Through cold rolling, flash annealing, and tempering processes, the steel displays a heterogeneous lamellar microstructure that is comprised of reversed austenite (RA) lamellae with high-density dislocations and partially recrystallized austenite (PRA) lamellae with sub-micron grains. The lamellar interfaces are prior-austenite grain boundaries (PAGBs) with thin layer precipitates. Intrinsically, a large number of grain boundaries hinder the propagation of cracks, enhancing fracture resistance in PRA lamellae. The dislocation cells in the RA lamellae act as soft barriers to crack propagation, blunting the crack tips and reducing the adverse effect of high-density dislocations on fracture toughness. Extrinsically, the toughening mechanisms include the deep expansion of dimples in the PRA lamellae, the interfacial delamination of lamellar interfaces, and transformation-induced plasticity (TRIP) effect. Our study may promote the development of high-strength and high-toughness austenitic steels and alloys for structural applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
2. Toughening materials: enhancing resistance to fracture10.1098/rsta.2020.0437 ↗
3. Making ultrastrong steel tough by grain-boundary delamination10.1126/science.aba9413 ↗
4. Facile route to bulk ultrafine-grain steels for high strength and ductility10.1038/s41586-021-03246-3 ↗
5. Stability and design of stainless steel structures–Review and outlook10.1016/j.tws.2019.04.019 ↗
6. Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles10.1016/j.actamat.2011.11.009 ↗
7. Tensile ductility and deformation mechanisms of a nanotwinned 316L austenitic stainless steel10.1016/j.jmst.2019.02.008 ↗
8. Challa · Scr. Mater. · 2014 · 86 · 6010.1016/j.scriptamat.2014.05.010 ↗
9. Towards strength-ductility synergy through hierarchical microstructure design in an austenitic stainless steel10.1016/j.scriptamat.2019.05.017 ↗
10. Reverse-transformation austenite structure control with micro/nanometer size10.1007/s12613-017-1434-1 ↗
11. First-principles evaluation of the effect of alloying elements on the lattice parameter of a 23Cr25NiWCuCo austenitic stainless steel to model solid solution hardening contribution to the creep strength10.1016/j.msea.2014.12.057 ↗
12. Enhancing the strength and ductility of CoCrFeMnNi high-entropy alloy by nitrogen addition10.1016/j.msea.2020.139587 ↗
13. Strengthening mechanisms in directed energy deposited austenitic stainless steel10.1016/j.actamat.2018.11.021 ↗
14. Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation10.1126/sciadv.aba9543 ↗
15. Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
16. Extra strengthening and work hardening in gradient nanotwinned metals10.1126/science.aau1925 ↗
17. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper10.1126/science.1200177 ↗
18. Achieving high hetero-deformation induced (HDI) strengthening and hardening in brass by dual heterostructures10.1016/j.jmst.2021.03.088 ↗
19. Unique microstructure and simultaneous enhancements of strength and ductility in gradient-microstructured Cu sheet produced by single-roll angular-rolling10.1016/j.actamat.2019.01.021 ↗
20. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility P10.1073/pnas.1517193112 ↗
21. Theory of designing the gradient microstructured metals for overcoming strength-ductility trade-off10.1016/j.scriptamat.2020.03.045 ↗
22. Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure10.1007/s10853-018-2322-4 ↗
23. Strength-ductility synergy in a 1.4GPa austenitic steel with a heterogeneous lamellar microstructure10.1016/j.jmst.2021.06.083 ↗
24. Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures10.1016/j.ijplas.2019.07.017 ↗
25. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
26. Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys10.1038/s41578-020-0212-2 ↗
27. An overview of tailoring strain delocalization for strength-ductility synergy10.1016/j.pmatsci.2020.100675 ↗
28. Fracture behavior of heterogeneous nanostructured 316L austenitic stainless steel with nanotwin bundles10.1016/j.actamat.2018.02.065 ↗
29. Fracture behavior of an austenitic stainless steel with nanoscale deformation twins10.1016/j.scriptamat.2016.09.012 ↗
30. Enhancing fracture toughness of nanotwinned austenitic steel by thermal annealing10.1016/j.scriptamat.2016.03.024 ↗
31. Size effect of deformation nanotwin bundles on their strengthening and toughening in heterogeneous nanostructured Cu, Sci10.1007/s11431-020-1584-6 ↗
32. 2017
33. Fracture toughness evaluation of nanostructured metals via a contactless crack opening displacement gauge10.1016/j.mtla.2019.100430 ↗
34. Microstructural evolution and mechanical behavior of phase reversion-induced bimodal austenitic steels10.1016/j.msea.2019.138669 ↗
35. Dislocation theory of yielding and strain ageing of iron
36. On the exceptional damage-tolerance of gradient metallic materials10.1016/j.mattod.2019.09.023 ↗
37. Cryogenic-temperature fracture toughness analysis of non-equi-atomic V10Cr10Fe45Co20Ni15 high-entropy alloy10.1016/j.jallcom.2019.151864 ↗
38. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
39. Fracture toughness of an advanced ultrahigh-strength TRIP-aided steel10.2355/isijinternational.54.955 ↗
40. Characterization and control of the compromise between tensile properties and fracture toughness in a quenched and partitioned steel10.1007/s11661-019-05265-2 ↗
41. Ultra-high-strength bainitic steels10.2355/isijinternational.45.1736 ↗
42. Fracture toughness of a high carbon and high silicon steel10.1016/S0921-5093(00)01272-7 ↗
43. ANN back-propagation prediction model for fracture toughness in microalloy steel10.1016/S0142-1123(01)00207-9 ↗
44. Influence of cold sprayed Cr3C2-Ni coating on fracture characteristics of additively manufactured 15Cr-5Ni stainless steel10.1016/j.matdes.2018.05.063 ↗
45. Influence of tempering in different melting routes on toughness behavior of AISI 4340 steel10.1007/s11665-020-05164-3 ↗
46. Crack propagation mechanisms of AISI 4340 steels with different strength and toughness10.1016/j.msea.2018.05.056 ↗
47. Near-threshold fatigue crack propagation in ultra-high strength steel: influence of load ratio and cyclic strength10.1115/1.3443519 ↗
48. Investigation on the cracking resistances of different ageing treated 18Ni maraging steels10.1016/j.msea.2019.138553 ↗
49. Fracture in a thin film of nanotwinned copper10.1016/j.actamat.2015.07.055 ↗
50. Hertzberg · 2020
51. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
52. Micro-mechanical analysis and TEM study of crack initiation in dislocation free zone
53. The TRIP effect and its application in cold formable sheet steels10.1002/srin.201700218 ↗
54. Nanolaminate transformation-induced plasticity–twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance10.1016/j.actamat.2014.11.010 ↗
55. Cryogenic toughness of commercial aluminum-lithium alloys: role of delamination toughening10.1007/BF02653929 ↗
56. Bone-like crack resistance in hierarchical metastable nanolaminate steels10.1126/science.aal2766 ↗
57. Effect of long-term operational aging on the mechanical properties and microstructure of austenitic 18Cr-9Ni steel and the weld metal10.1134/S2075113313060087 ↗
58. Decreased Ti/Al ratio modifies the precipitate behavior of Cr23C6 and improves long-term stress-rupture life10.1016/j.jallcom.2020.157303 ↗
59. Composition and grain size dependencies of strain-induced martensitic transformation in metastable austenitic stainless steels10.2355/tetsutohagane1955.63.5_772 ↗
60. Transformation-induced plasticity (TRIP) in advanced steels: a review10.1016/j.msea.2020.140023 ↗
61. Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility10.1016/j.actamat.2016.04.045 ↗