Modeling of Gasification of a Solid Porous Energetic Material in a Low-Temperature Aircraft Gas Generator
Source abstract
Abstract
Abstract This paper presents an improved mathematical model for gasification of a solid porous fuel when hot gases are filtered through it. Gasification modes were studied at a constant pressure drop between the gasifier inlet and outlet and at a constant gas velocity at the gasifier inlet using polymethyl methacrylate as an example. In the case of a constant pressure drop, fuel gasification takes longer and the gas temperature at the outlet increases more slowly than in the case of a constant gas velocity at the inlet under comparable conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Rocket and propulsion systems research · Combustion and Detonation Processes · Combustion and flame dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. V. N. Avrashkov, E. S. Metelkina, and D. V. Meshcheryakov, “Investigation of High-Speed Ramjet Engines," Fiz. Goreniya Vzryva 46 (4),36–44 (2010) [Combust., Expl., Shock Waves 46 (4), 400–407 (2010); https://doi.org/10.1007/s10573-010-0054-0].10.1007/s10573-010-0054-0 ↗
2. R. K. Seleznev, “On the Way to Hypersound. Brief Historical Overview," Fiz.-Khim. Kinet. Gaz. Din. 15 (3), 2014; http://chemphys.edu.ru/issues/2014-15-3/articles/228.
3. M. V. Belobrovina and N. S. Senyushkin, “Use of Ramjets," Akt. Probl. Aviats. Kosm. 1 (9), 47–48 (2013).
4. A. E. Zangiev, V. S. Ivanov, and S. M. Frolov, “Thrust Characteristics of an Airbreathing Pulse Detonation Engine in Supersonic Flight at Different Altitudes," Khim. Fiz. 32 (5), 62–76 (2013) [Russ. J. Phys. Chem. B7, 276–289 (2013); https://doi.org/10.1134/S1990793113050126].10.1134/s1990793113050126 ↗
5. V. N. Karasev, L. L. Kartovitskii, and V. M. Levin, “Organization of the Operation Process in a Ramjet Combustor," Vest. Mosk. Aviats. Inst. 16 (5), 10 (2009).
6. I. S. Aver’kov, V. V. Raznoschikov, and L. S. Yanovsky, “Parametric Analysis of the Influence of Fuel Properties on the Flight Performance of a Ramjet-Powered Vehicle," Izv. Ross. Akad. Raket Artil. Nauk, 104 (4), 117–125 (2018).
7. S. M. Frolov, V. I. Zvegintsev, V. S. Ivanov, et al., “Demonstrator of Continuous-Detonation Air-Breathing Ramjet: Wind Tunnel Data," Dokl. Akad. Nauk 474 (1), 51–55 (2017) [Dokl. Phys. Chem. 474, 75–79 (2017); https://doi.org/10.1134/S0012501617050013].10.1134/S0012501617050013 ↗
8. D. A. Vnuchkov, V. I. Zvegintsev, D. G. Nalivaichenko, et al., “Testing of Solid Fuel Ramjet with Measurement of Thrust Characteristics in Aerodynamic Facilities," Teplofiz. Aeromekh. 25 (4), 629–635 (2018) [Thermophys. Aeromech. 25 (4), 605–611 (2018); https://doi.org/10.1134/S0869864318040121.10.1134/s0869864318040121 ↗
9. V. V. Sakhin, E. M. Gerliman, and N. A. Brykov, “Study of Ramjet Cycle Parameters," Syst. Anal. Analit. 6 (1), 41–45 (2018).
10. R. R. Gubaidullina and N. S. Senyushkin, “Approach to Thermogasdynamic Modeling of a Hypersonic Ramjet Jet Engine," Aerokosm. Tekh., Vysok. Tekhnol. Innov. 1, 94–97 (2018).
11. M. V. Belobrovina and N. S. Senyushkin, “Calculation of Thermogasdynamic Ramjet Parameters," Akt. Probl. Aviats. Kosm. 1 (10), 40–41 (2014).
12. V. I. Biryukov, V. N. Ivanov, and R. A. Tsarapkin, “Method for Predicting the Stability Limit to Acoustic Oscillataionsin Liquid-Propellant Rocket Engine Combustion Chambers Based on Combustion Noise," Fiz. Goreniya Vzryva 57 (1), 80–89; DOI: 10.15372/FGV20210109 [Combust., Expl., Shock Waves. 57 (1), 74–82 (2021); https://doi.org/10.1134/S0010508221010093].10.1134/s0010508221010093 ↗
13. L. L. Kartovitskii, V. M. Levin, and A. A. Yakovlev, “Concept of Improving the Ramjet Performance," Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh. 4, 67–72 (2015).
14. V. Yu. Aleksandrov, K. Yu. Aref’ev, A. N. Prokhorov, et al., “Experimental Methods for Studying the Performance of High-Speed Solid Fuel Gas-Generator Ramjet," Izv. Vyssh. Uchebn. Zaved., Mashinostr. 671 (2), 65–75 (2016).
15. A. D. Egoryan and A. N. Kraiko, “Comparison of Air-Breathing Engines with Slow and Detonation Combustion," Izv. Ross. Akad. Nauk, Mekh. Zhidk. Gaza, No. 2, 123–137 (2020).10.1134/S0015462820020020 ↗
16. S. M. Frolov and V. S. Ivanov, “Breakthrough in the Theory of Ramjet Engines," Khim. Fiz. 40 (4), 68–75 (2021) [Russ. J. Phys. Chem. B 15, 318–325 (2021); https://doi.org/10.1134/S1990793121020184].10.1134/s1990793121020184 ↗
17. S. A. Rashkovskii, Yu. M. Milekhin, A. V. Fedorychev, et al., “Mechanism of Stabilization of the Combustion in the Duct of the Solid Fuel Grain of a Solid Fuel Ramjet," Dokl. Ross. Akad. Nauk, Khim., Nauki Mater. 490 (1), 51–56 (2020) [Dokl. Phys. Chem. 490 (1), 9–13 (2020); https://doi.org/10.1134/S0012501620020013].10.1134/s0012501620020013 ↗
18. V. M. Levin, V. N. Karasev, L. L. Kartovitsky, E. A. Krymov, et al., “Unsteadiness in a Ramjet Model," Fiz. Goreniya Vzryva 49 (6), 68–75 (2013) [Combust., Expl., Shock Waves 49 (6), 682–689 (2013); https://doi.org/10.1134/S0010508213060075].10.1134/s0010508213060075 ↗
19. Yu. V. Tunik, “Actual Schemes of Supersonic Ramjet with Unsteady Detonation Combustion," Fiz.-Khim. Kinet. Gaz. Din. 21 (1), 1–12 (2020).10.33257/PhChGD.21.1.871 ↗
20. I. V. Kytmanov and I. E. Nikitina, “Controlling a Solid Fuel Ramjet by Varying Gas Generator Flow," Kompleks. Probl. Razv. Obraz. Ekon. Reg. 6 (1), 106–131 (2015).
21. P. K. Tretyakov, “Organization of a Pulsed Mode of Combustion in Scramjet," Fiz. Goreniya Vzryva 48 (6), 21–27 (2012) [Combust., Expl., Shock Waves 48 (6) 677–682 (2012); https://doi.org/10.1134/S0010508212060020].10.1134/s0010508212060020 ↗
22. S. T. Surzhikov, “Simulation of Radiation-Convective Heating of Hydrogen- and Hydrocarbon-Fueled Model Chambers of Ramjet Engines," Fiz.-Khim. Kinet. Gaz. Din. 15 (3), 2 (2014).
23. Y. E. Bogomolov and V. I. Malinin, “Determination of Stall Characteristics in the Prechamber of an Aluminum Powder Fueled Combined Ramjet," Aerokosm. Tekh., Vysok. Tekhnol. Innovats. 2, 35–38 (2019).
24. A. N. Shiplyuk et al., “Gasification of Low-Melting Hydrocarbon Material in the Airflow Heated by Hydrogen Combustion," Int. J. Hydrogen Energy 45 (15), 9098–9112 (2020); DOI: 10.1016/j.ijhydene.2020.01.099.10.1016/j.ijhydene.2020.01.099 ↗
25. V. I. Zvegintsev et al., “Gasification of Low-Melting Hydrocarbon Materials in High-Temperature Gas Flow, Gorenie Vzryv 12 (3), 108–116 (2019).
26. A. N. Shiplyuk, V. I. Zvegintsev, S. M. Frolov, et al., “Gasification of Low-Melting Fuel in a High-Temperature Flow of Inert Gas," J. Propul. Power 37 (1), 20, (2021); DOI: 10.2514/1.B37780.10.2514/1.b37780 ↗
27. E. A. Salgansky and N. A. Lutsenko, “Effect of Solid Fuel Characteristics on Operating Conditions of Low-Temperature Gas Generator for High-Speed Flying Vehicle," Aerospace Sci. Technol. No. 109, 106420 (2021); DOI: 10.1016/j.ast.2020.106420.10.1016/j.ast.2020.106420 ↗
28. K. O. Sabdenov, “Effect of Molar Mass Variation on a Flame Temperature and Burning Rate," Fiz. Goreniya Vzryva 57 (1), 51–57 (2021) [Combust., Expl., Shock Waves 57 (1), 46–52 (2021); https://doi.org/10.1134/S0010508221010056].10.1134/s0010508221010056 ↗
29. M. Fierro, P. Requena, E. Salgansky, and M. Torres, “Experimental Investigation of Reverse Flow Porous Medium Reactor with Premixed and Non-Premixed Flames," Chem. Eng. J., No. 425, 130178 (2021); DOI: 10.1016/j.cej.2021.130178].10.1016/j.cej.2021.130178 ↗
30. V. A. Levin, N. A. Lutsenko, E. A. Salgansky, et al., “A Model of Solid-Fuel Gasification in the Combined Charge of a Low-Temperature Gas Generator of a Flying Vehicle," Dokl. Akad. Nauk 482 (2), 150–154 (2018) [Dokl. Phys. 63, 375–379 (2018); https://doi.org/10.1134/S1028335818090057].10.1134/s1028335818090057 ↗
31. E. A. Salgansky, N. A. Lutsenko, V. A. Levin, et. al., “Modeling of Solid Fuel Gasification in Combined Charge of Low-Temperature Gas Generator for High-Speed Ramjet Engine," Aerospace Sci. Technol. 84, 31–36 (2019); DOI: 10.1016/j.ast.2018.10.029.10.1016/j.ast.2018.10.029 ↗
32. R. I. Nigmatulin, Fundamentals of the Mechanics of Heterogeneous Media (Nauka, Moscow, 1978) [in Russian].
33. Y. Pizzo, C. Lallemand, A. Kacem, et al., “Steady and Transient Pyrolysis of Thick Clear PMMA Slabs," Combust. Flame 162 (1), 226–236 (2015); DOI: 10.1016/j.combustflame.2014.07.004.10.1016/j.combustflame.2014.07.004 ↗