Low-temperature martensitic transformation in tool steels in relation to their deep cryogenic treatment

Abstract The low-temperature martensitic transformation in steel X153CrMoV12 containing (mass%) 1.55C, 11.90Cr, 0.70V, 0.86Mo is studied using dilatometry, Mossbauer spectroscopy, X-ray diffraction, mechanical spectroscopy and transmission electron microscopy. Some additional measurements were carried out on steel X220CrMoV13-4. It is shown that, in contrast to the widely known absence of martensitic transformation during deep cryogenic treatment, this transformation occurs with isothermal kinetics within the temperature range of −100 down to −170 °C with its largest intensity near −150 °C. No transformation is observed at −196 °C. The remarkable features of the isothermal martensitic transformation are: (i) the plastic deformation, which is explained by the absence of ageing of martensite at low temperatures; and (ii) the abnormally low tetragonality of martensite. In contrast to existing interpretations, the abnormally low c / a ratio is interpreted in terms of the capture of immobile carbon atoms by gliding dislocations during plastic deformation at low temperatures. A recommendation is proposed for optimizing the deep cryogenic treatment of tool steels.