Discrete dislocation density modelling of single phase FCC polycrystal aggregates
Source abstract
Abstract
A new dislocation-mechanics based crystallographic theory has been developed to model the mechanical behaviour of single-phase FCC polycrystal aggregates. In the theory, dislocations are discretised into edge and screw components with intrinsically different relative mobilities and are subject to different dynamic recovery processes. The theory has been implemented within a finite-strain and rate-dependent constitutive framework, and applied to a thin polycrystal Cu specimen to investigate the effect of intragranular lattice misorientations on deformation behaviour. These misorientations are representative of low angle grain boundaries, which are known to play an important role in the microstructural evolution of polycrystals under monotonic and cyclic deformation. This study reveals that the presence of these misorientations strengthen the material response by suppressing and re-distributing the localisation of slip within the grains, as well as inhibiting the formation of sub-grains. Through the discretisation of dislocations, the model also predicts a higher proportion of edge dislocations in the vicinities of localised slip regions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Polycrystalline plasticity and the evolution of crystallographic texture in fcc metals10.1098/rsta.1992.0111 ↗
2. Effects of grain interactions on deformation and local texture in polycrystals10.1016/0956-7151(94)00460-Y ↗
3. Work-hardening /softening behaviour of B.C.C. polycrystals udring changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress–strain behaviour of an IF steel during two-stage strain paths10.1016/S1359-6454(01)00066-0 ↗
4. Using texture components in crystal plasticity finite element simulations10.1016/S0749-6419(03)00092-5 ↗
5. Microstructure and flow stress of polycrystals and single crystals10.1016/S1359-6454(97)00365-0 ↗
6. The influence of microstructure on work hardening in aluminium10.1016/1359-6454(95)00403-3 ↗
7. Teodosiu C, Raphanel JL, Tabourot L, Finite element simulation of the large elastoplastic deformation of multicrystals. In: Teodosiu C, Raphanel JL, Tabourout L, Sidoroff F, editors. Proceedings of the international seminar MECAMAT’91: Large plastic deformations, fundamental aspects and applications to metal forming, Fontainebleau, France; 1991. p. 153–6810.1007/978-94-011-3644-0_39 ↗
8. Becker R. Modeling of a clumnar grain polycrystal deformed in plane strain compression. In: Bieler TR, Lalli LA, MacEwen SR, editors. Proceedings of the 2nd TMS symposium: hot deformation of aluminum alloys II; 1998. p. 255–66
9. Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations10.1016/S1359-6454(99)00408-5 ↗
10. Length scale effects on the macroscopic behaviour of single and polycrystalline FCC crystals
11. Inelastic microstructural failure mechanisms in crystalline materials with high angle grain boundaries10.1016/0022-5096(96)00049-X ↗
12. Modeling the evolution of crystallographic dislocation density in crystal plasticity10.1016/S0022-5096(01)00134-X ↗
13. Measurement of screw and edge dislocation density by means of X-ray Bragg profile analysis10.1016/S0921-5093(01)00979-0 ↗
14. Strain localisation in ductile single crystals10.1016/0022-5096(77)90001-1 ↗
15. Observations of dislocation glide and climb in lithium fluoride crystals10.1063/1.1722532 ↗
16. Busso EP. Cyclic deformation of monocrystalline nickel aluminide and high temperature coatings. PhD Thesis, MIT 1990
17. Dislocation mechanics-based crystallographic model of a B2-type intermetallic alloy10.1016/S0749-6419(95)00041-0 ↗
18. Problems of plastic gliding
19. Hibbitt, Karlsson and Sorensen Inc., ABAQUS V6.2, 2001. Providence, RI, USA
20. Cheong KS, Busso EP. Modeling the monotonic and cyclic deformation of FCC metals at low homologous temperatures [in preparation]
21. Cell structures in copper single crystals deformed in the [001] and [111] axes10.1016/0036-9748(80)90091-5 ↗
22. Tensile deformation of high-purity copper as a function of temperature, strain rate, and grain size10.1016/0001-6160(53)90022-4 ↗
23. Thermodynamics and kinetics of slip
24. Elasto-viscoplastic constitutive equations for polycrystalline fcc materials at low homologous temperatures10.1016/S0022-5096(01)00022-9 ↗
25. Work hardening of copper single crystals with multiple glide orientations
26. Theory of plastic deformation : Properties of low energy dislcoation structures
27. Plastic deformation and work hardening in Dislocations in Solids
28. Latent hardening in copper and aluminium single crystals10.1016/0001-6160(80)90162-5 ↗
29. Elektronmikroskopische Untersuchung der Gleitlinienbildung auf Kupfereinkristallen10.1007/BF01325693 ↗
30. Kombinierte Zug-und Torsionsverformung von Kupbfer-Einkristallrohen
31. Die Oberflächenerscheinungen auf gedehnter aluminium-einkristallen in ihrer abhängigkeit von der dehngeschwindigkeit10.1007/BF01329414 ↗
32. Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities10.1080/01418617908234871 ↗
33. Correspondence between layered cell structures and slip lines in deformed copper single crystals10.1143/JJAP.18.1429 ↗
34. Kelly · 1971
35. Consideration of grain-size effect and kinetics in the plastic deformation of metal polycrystals10.1016/S1359-6454(00)00136-1 ↗
36. Delaire F. PhD Thesis, Université Paris-Nord, France 1999
37. Hull · 2001