journal article·2022-01

Anomalous precipitate-size-dependent ductility in multicomponent high-entropy alloys with dense nanoscale precipitates

Y.L. Zhao, Y.R. Li, G.M. Yeli, J.H. Luan, S.F. Liu, W.T. Lin, D. Chen, X.J. Liu, J.J. Kai, C.T. Liu, T. Yang

Acta Materialia· Volume 223
Publisher page

Abstract

Abstract Precipitates are known to be effective obstacles for dislocation gliding, which can substantially increase the strength of metallic materials. In particular, dense nanoscale precipitates under a peak-aged condition can achieve a favorable precipitate size for pronounced strengthening, which, however, often causes progressive stress localization and premature failure of alloys with reduced ductility. Here, we showcase an “unusual ductilization effect from the peak-aged state” in a high-entropy alloy (HEA) system with a medium-to-high stacking fault energy (SFE). Compared with the under-aged HEA, the peak-aged HEA with relatively large precipitates exhibits a pronounced increment in both the strength and the tensile ductility, distinguishing from the conventional wisdom. Such an anomalous precipitate-size-dependence of ductility is achieved by trigging a unique multi-staged strain-hardening mechanism from the activation of microbands, which is enabled through a delicate modulation of precipitate size, volume fraction, and SFE of the precipitate-hardened HEA. Specifically, the dynamically active microbands upon loading can simultaneously serve as dislocation obstacles for strengthening and also the origins of stress delocalization, leading to a sustainable strain hardening for balanced mechanical properties. These discoveries shed new insights into the innovative design of ultrastrong and ductile metallic materials for advanced structural applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility10.1038/nature14144 ↗
2. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
3. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
4. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
5. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
6. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
7. A new 1.9GPa maraging stainless steel strengthened by multiple precipitating species10.1016/j.matdes.2015.05.042 ↗
8. Gamma-gamma prime-gamma double prime dual-superlattice superalloys10.1016/j.scriptamat.2017.04.029 ↗
9. Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity10.1126/science.aav7086 ↗
10. Synthesis of a new tungsten-free γ-γ′ Cobalt-based superalloy by tuning alloying additions10.1016/j.actamat.2014.11.016 ↗
11. Precipitation mechanism and mechanical properties of an ultra-high strength steel hardened by nanoscale NiAl and Cu particles10.1016/j.actamat.2015.06.063 ↗
12. Effect of Zn additions on the age-hardening of Mg-2.0Gd-1.2Y-0.2Zr alloys10.1016/j.actamat.2007.02.036 ↗
13. Strengthening from Nb-rich clusters in a Nb-microalloyed steel10.1016/j.scriptamat.2012.01.029 ↗
14. Ripening of L12 nanoparticles and their effects on mechanical properties of Ni28Co28Fe21Cr15Al4Ti4 high-entropy alloys10.1016/j.msea.2019.138803 ↗
15. Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates10.1016/j.ijplas.2017.10.005 ↗
16. Nanoscale precipitation and its influence on strengthening mechanisms in an ultra-high strength low-carbon steel10.1016/j.ijplas.2018.09.009 ↗
17. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
18. An atom probe tomography study of site preference and partitioning in a nickel-based superalloy10.1016/j.actamat.2016.11.053 ↗
19. Nabarro · 1996
20. Strengthening mechanisms in polycrystalline multimodal nickel-base superalloys10.1007/s11661-009-9858-5 ↗
21. A modelling approach to yield strength optimisation in a nickel-base superalloy10.1016/j.ijplas.2013.08.009 ↗
22. Reed · 2008
23. On the prediction of the yield stress of unimodal and multimodal γ’ Nickel-base superalloys10.1016/j.actamat.2015.07.048 ↗
24. On the origin of planar10.1016/0001-6160(89)90143-0 ↗
25. Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel10.1016/j.actamat.2016.06.037 ↗
26. Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates
27. Microband-induced plasticity in a high Mn-Al-C light steel10.1016/j.msea.2008.05.042 ↗
28. Some new hardening apects concerning particle mechanisms in γ′ precipitating Ni-base alloys-I. theretical concept
29. Dislocation mean free paths and strain hardening of crystals10.1126/science.1156101 ↗
30. Nanoscale precipitates as sustainable dislocation sources for enhanced ductility and high strength10.1073/pnas.1914615117 ↗
31. Effects of grain size on body-centered-cubic martensitic transformation in metastable Fe46Co30Cr10Mn5Si7V2 high-entropy alloy10.1016/j.scriptamat.2020.11.005 ↗
32. Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures10.1016/j.actamat.2018.09.057 ↗
33. EBSD characterization of cryogenically rolled type 321 austenitic stainless steel10.1007/s11661-018-4919-2 ↗
34. Mechanisms of deformation localization and mechanical twinning under the conditions of phase instability of a crystal in stress fields10.1007/s11182-005-0003-7 ↗
35. Transformation induced softening and plasticity in high entropy alloys10.1016/j.actamat.2018.01.002 ↗
36. The formation of microbands by cross-slips10.1016/0036-9748(83)90098-4 ↗
37. Strain hardening and substructural evolution in NiCo solid solutions at large strains10.1016/0921-5093(89)90627-8 ↗
38. Microstructural evolution in a non-cell forming metal:Al-Mg10.1016/0956-7151(93)90251-M ↗
39. Slip band formation and mobile dislocation density generation in high rate deformation of single fcc crystals10.1080/14786430802129833 ↗
40. Microbanding mechanism in an Fe-Mn-C high-Mn twinning-induced plasticity steel10.1016/j.scriptamat.2013.03.010 ↗
41. An overview of tailoring strain delocalization for strength-ductility synergy10.1016/j.pmatsci.2020.100675 ↗
42. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗
43. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗
44. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
45. Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe-Mn-Al-C steel10.1016/j.actamat.2012.07.018 ↗
46. Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel10.1016/j.actamat.2017.08.049 ↗
47. The determination of the elastic field of an ellipsoidal inclusion, and related problems
48. Models for dislocation cross-slip in close-packed crystal structures: a critical review10.1016/S0079-6425(01)00003-2 ↗
49. Some aspects of cross-slip mechanisms in metals and alloys10.1051/jphys:0198900500180245500 ↗
50. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
51. The substructure of plastically deformed nickel10.1016/0001-6160(64)90192-0 ↗
52. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗