journal article·2020-08

Short-range order strengthening in boron-doped high-entropy alloys for cryogenic applications

Jae Bok Seol, Jae Wung Bae, Jung Gi Kim, Hyokyung Sung, Zhiming Li, Hyun Hwi Lee, Sang Hun Shim, Jae Hoon Jang, Won-Seok Ko, Sun Ig Hong, Hyoung Seop Kim

Acta Materialia· Volume 194
Publisher page

Abstract

Abstract Boron doping with an adequate concentration is highly desirable for alloy development because it profoundly improves the material's interface cohesion via interfacial segregation. However, scientific and applicable potentials of soluble boron that resides at the alloy internal grains are generally overlooked. Here we report a strategy for overcoming the typically low strengths of face-centered cubic high-entropy alloys (HEAs) through exploiting soluble boron instead of the interfacial boron. We find that soluble boron increases stress/strain field at the recrystallized HEA grain structure, leading to the generation of short-range order (SRO) in those deformation structure under load at 77 K. The highly increased degree of SRO at planar dislocation slip band that forms during straining, proved by electron microscopy and synchrotron X-ray diffraction, strengthens a typical non-equimolar Fe40Mn40Co10Cr10 (at%) HEA, particularly increasing yield strengths by ∼32%, to ∼1.1 GPa compared to those of boron-free reference materials with similar grain sizes. The advent of deformation-induced SRO domains causes severe lattice distortion (specifically, contraction), leading to the increased cryogenic yield strength of ∼210 MPa, but generating micro-voids at grain boundaries. This study on deformation-induced SRO via boron advances the fundamental understanding of SRO impacts on HEA grains and mechanical properties at cryogenic temperatures, which may pave a general pathway for developing a wide range of ultrastrong alloys for cryogenic applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Fatigue crack growth resistance of structural alloys at cryogenic temperatures
2. The use of a boron addition to prevent intergranular embrittlement in Fe−12Mn
3. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
4. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
5. High entropy alloys as a bold step forward in alloy development10.1038/s41467-019-09700-1 ↗
6. High-entorpy alloys: A critical review10.1080/21663831.2014.912690 ↗
7. Micorstructure and properties of high-entorpy alloys10.1016/j.pmatsci.2013.10.001 ↗
8. High-entorpy alloys10.1038/s41578-019-0121-4 ↗
9. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
10. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
11. Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures10.1016/j.actamat.2018.09.057 ↗
12. Grain boundary segregation engineering in metallic alloys: a pathway to the design of interfaces10.1016/j.cossms.2014.06.002 ↗
13. McLean · 1957
14. Effect of boron on grain-boundaries in Ni3Al10.1016/0001-6160(85)90139-7 ↗
15. Non-equilibrium grain boundary segregation of boron in austenitic stainless steel−I. large scale segregation behaviour10.1016/0001-6160(88)90023-5 ↗
16. Boron doped ultrastrong and ductile high-entropy alloys10.1016/j.actamat.2018.04.004 ↗
17. Grain boundary segregation of boron during continuous cooling10.1016/0001-6160(89)90274-5 ↗
18. Atomic scale investigation on the distribution of boron in medium carbon steels by atom probe tomography and EELS10.1016/j.ultramic.2009.12.006 ↗
19. Atomic scale investigation of non-equilibrium segregation of boron in a quenched Mo-free martensitic steel10.1016/j.ultramic.2015.03.009 ↗
20. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
21. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
22. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
23. The atomic size-mismatch contribution to the enthalpy of formation of concentrated substitutional metallic solid solutions10.1002/pssa.2210850211 ↗
24. The elastic-strain energy criterion of phase formation for complex concentrated alloys10.1016/j.mtla.2019.100222 ↗
25. Short-range ordered structure of Ga0.47In0.53 as studied by energy-filtered electron diffraction and HREM10.1093/oxfordjournals.jmicro.a023419 ↗
26. Quantitative analysis of short-range order diffuse scattering in Cu-27.5 at%Pd alloy with energy-filtered electron diffraction10.2320/matertrans1989.41.238 ↗
27. Direct imaging of short-range order and its impact on deformation in Ti-6Al10.1126/sciadv.aax2799 ↗
28. Solid‐solution phase formation rules for multi‐ component alloys10.1002/adem.200700240 ↗
29. Prediction of high-entropy stabilized solid-solution in multicomponent alloys10.1016/j.matchemphys.2011.11.021 ↗
30. Nanoscale modulated structures by balanced distribution of atoms and mechanical/structural stabilities in CoCuFeMnNi high entropy alloys10.1016/j.msea.2019.138120 ↗
31. Ab initio molecular-dynamics simulation of the liquid-metal-amorphous-semiconductor transition in germanium10.1103/PhysRevB.49.14251 ↗
32. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
33. Generalized gradient approximation mate simple10.1103/PhysRevLett.77.3865 ↗
34. Influences of interstitial and extrusion temperature on grain boundary segregation, Y−Ti−O nanofeatures, and mechanical properties of ferritic steels10.1016/j.actamat.2018.04.046 ↗
35. Qualification of the tomographic reconstruction in atom probe by advanced spatial distribution map techniques10.1016/j.ultramic.2009.03.016 ↗
36. Advances in the reconstruction of atom probe tomography data10.1016/j.ultramic.2010.11.016 ↗
37. The adsorption of gases on plane surfaces of glass, mica and platinum10.1021/ja02242a004 ↗
38. Fracture and strength properties of selected austenitic stainless steels at cryogenic temperatures10.1016/0011-2275(81)90175-2 ↗
39. Properties of metallic materials for LNG service
40. Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels10.1016/j.actamat.2015.08.027 ↗
41. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy10.1038/ncomms15719 ↗
42. On the origin of planar slip in F.C.C. alloys10.1016/0001-6160(89)90143-0 ↗
43. The geometry and interfaces due to ordering and their observation in transmission electron microscopy and electron diffraction10.1016/0039-6028(72)90266-X ↗
44. Tanner · 1974 · 180
45. Effect of short-range ordering on stress corrosion cracking susceptibility of Alloy 600 studied by electron and neutron diffraction10.1016/j.actamat.2014.10.009 ↗
46. Deformation rate controls atomic-scale dynamic strain aging and phase transformation in high Mn TRIP steels10.1016/j.actamat.2017.03.076 ↗
47. J.W. Bae, J.M. Park, K.S. Kim, Strain-rate sensitivity of high-entropy alloys and its significance in deformation10.1080/21663831.2019.1668489 ↗
48. Microstructural change in austenitic Fe−30.0wt% Mn−7.8wt% Al−1.3wt% C initiated by spinodal decomposition and its influence on mechanical properties10.1016/S1359-6454(97)00201-2 ↗
49. Direct evidence for the formation of ordered carbides in a ferrite-based low-density Fe−Mn−Al−C alloy studied by transmission electron microscopy and atom probe tomography10.1016/j.scriptamat.2012.08.013 ↗
50. Alloy design, combinatorial synthesis, and microstructure-property relations for low-density Fe−Mn−Al−C austenitic steels10.1007/s11837-014-1032-x ↗
51. Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel10.1016/j.actamat.2017.08.049 ↗
52. Current state of Fe-Mn-Al-C low density steels10.1016/j.pmatsci.2017.05.002 ↗
53. Annealing-induced abnormal hardening in a cold rolled CrMnFeCoNi high entropy alloy10.1016/j.scriptamat.2018.11.042 ↗
54. Transmission electron microscopy: Diffraction, Imaging, and spectrometry
55. Microstructural evolution of a Ni-based superalloy (617B) at 700°C studied by electron microscopy and atom probe tomography10.1016/j.actamat.2011.11.020 ↗
56. On the effect of boron on grain boundary character in a new polycrysltalline superalloys10.1016/j.actamat.2015.10.006 ↗
57. Chemical short-range orders and the induced structural transition in high entropy alloys10.1016/j.scriptamat.2017.09.049 ↗
58. Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy10.1038/ncomms6964 ↗
59. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways10.1038/s41467-019-11464-7 ↗
60. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗
61. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
62. Local structure and short-range order in a NiCoCr solid solution alloy10.1103/PhysRevLett.118.205501 ↗
63. Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys10.1073/pnas.1808660115 ↗
64. Tuning order in disorder10.1038/nmat4300 ↗
65. The plastic deformation of ordered FeCo and Fe3Al alloys10.1016/0001-6160(64)90019-7 ↗
66. Hot deformation behavior of a Fe3Al-binary alloy in the A2 and B2-order regimes10.1016/j.intermet.2004.10.017 ↗
67. Strain-induced ordering in silicon-germanium alloys10.1103/PhysRevB.34.1363 ↗
68. On the morphology of strain-induced martensite and the transformation-induced plasticity in Fe-Ni and Fe-Cr-Ni alloys10.2355/isijinternational1966.10.163 ↗
69. Effect of strain-induced martensite on tensile properties and hydrogen embrittlement of 304 stainless steel10.1007/s11661-015-3198-4 ↗
70. Impact of short-range ordering on yield strength of high manganese austenitic steels10.1016/j.msea.2014.07.016 ↗