BCC-FCC interfacial effects on plasticity and strengthening mechanisms in high entropy alloys
Source abstract
Abstract
Al0.7CoCrFeNi high entropy alloy (HEA) with a microstructure comprising strain free face-centered cubic (FCC) grains and strongly deformed sub-structured body centered cubic (BCC) grains was subjected to correlative nanoindentation testing, orientation imaging microscopy and local residual stress analysis. Depending on the geometry of BCC-FCC interface, certain boundaries indicated appearance of additional yield excursions apart from the typically observed elastic to plastic displacement burst. The role of interfacial strengthening mechanisms is quantified for small scale deformation across BCC-FCC interphase boundaries. An overall interfacial strengthening of the order of 4GPa was estimated for BCC-FCC interfaces in HEAs. The influence of image forces due to the presence of a BCC-FCC interface is quantified and correlated to the observed local stress and hardness gradients in both the BCC and FCC grains.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Alloy design strategies and future trends in high-entropy alloys
2. Gao · 2016
3. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
4. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
5. Secondary phases in AlxCoCrFeNi high-entropy alloys: an in-situ TEM heating study and thermodynamic appraisal10.1016/j.actamat.2017.03.066 ↗
6. Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization10.1016/j.msea.2015.08.078 ↗
7. Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys10.1038/srep40704 ↗
8. Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy10.1038/s41598-017-16509-9 ↗
9. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
10. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
11. On the criteria for slip transmission across interfaces in polycrystals10.1016/0956-716X(92)90173-C ↗
12. Dislocation and grain boundary interactions in metals10.1016/0001-6160(88)90058-2 ↗
13. Interaction of dislocations with grain boundaries in Ni3Al, Acta Metall
14. Attempt to design a strong solid10.1103/PhysRevB.2.547 ↗
15. The interaction of dislocations and boundaries10.1080/14786440108520278 ↗
16. One-dimensional dislocations. II. Misfitting monolayers and oriented overgrowth10.1098/rspa.1949.0096 ↗
17. Theory of the core structures of dislocations in BCC metals
18. An overview of interface-dominated deformation mechanisms in metallic multilayers10.1016/j.cossms.2010.09.002 ↗
19. Grain and interface boundaries governed strengthening mechanisms in metallic multilayers10.1016/j.jallcom.2016.12.254 ↗
20. Size dependent plasticity and damage response in multiphase body centered cubic high entropy alloys10.1016/j.actamat.2018.03.015 ↗
21. A novel pole figure inversion method: specification of the MTEX algorithm10.1107/S0021889808030112 ↗
22. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
23. On the determination of local residual stress gradients by the slit milling method10.1007/s10853-015-8927-y ↗
24. Measurement of spatial stress gradients near grain boundaries10.1016/j.scriptamat.2017.03.036 ↗
25. Experimental determination and theoretical analysis of local residual stress at grain scale10.2495/MC170011 ↗
26. Gottstein · 2013
27. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
28. Assessment of geometrically necessary dislocation levels derived by 3D EBSD10.1016/j.actamat.2015.06.051 ↗
29. Incipient plasticity during nanoindentation at grain boundaries in body-centered cubic metals10.1016/j.actamat.2005.07.001 ↗
30. “Dislocation–interface” interaction — stress accommodation processes at interfaces10.1016/S0921-5093(00)01696-8 ↗
31. The influence of grain boundaries on mechanical properties10.1007/BF02661312 ↗
32. On the absorption of dislocations by grain boundaries10.1080/14786437708244939 ↗
33. Grain-boundary shear-migration coupling. II. Geometrical model for general boundaries10.1016/j.actamat.2009.01.023 ↗
34. Experimental observations of stress-driven grain boundary migration10.1126/science.1178226 ↗
35. Grain boundary shear–migration coupling—I. In situ TEM straining experiments in Al polycrystals10.1016/j.actamat.2009.01.014 ↗
36. Coupling grain boundary motion to shear deformation10.1016/j.actamat.2006.08.004 ↗
37. Johnson · 1987
38. Non-linear deformation mechanisms during nanoindentation10.1016/S1359-6454(98)00024-X ↗
39. The equilibrium of linear arrays of dislocations10.1080/14786445108561060 ↗
40. Atomistic simulations of dislocation–interface interactions in the Cu-Ni multilayer system10.1080/01418610008212148 ↗
41. On interface strengthening ability in metallic multilayers10.1016/j.scriptamat.2007.03.032 ↗
42. Atomistic simulations of dislocations in a model BCC multicomponent concentrated solid solution alloy10.1016/j.actamat.2016.12.011 ↗
43. Atomistic simulations of dislocation behavior in a model FCC multicomponent concentrated solid solution alloy10.1016/j.actamat.2017.05.071 ↗
44. Generalized stacking fault energies, ductilities, and twinnabilities of CoCrFeNi-based face-centered cubic high entropy alloys10.1016/j.scriptamat.2017.06.014 ↗
45. Influences of stress on the measurement of mechanical properties using nanoindentation: Part I. Experimental studies in an aluminum alloy10.1557/JMR.1996.0091 ↗
46. Effect of residual stresses on the hardness of bulk metallic glasses10.1016/j.actamat.2011.01.025 ↗
47. 2018