journal article·2016-02Open access

Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy

Mansur Ahmed, David Wexler, Gilberto Casillas, Dmytro G. Savvakin, Elena V. Pereloma

Acta Materialia· Volume 104

Abstract

Abstract A metastable β Ti–10V–3Fe–3Al–0.27O (wt.%) alloy was subjected to thermo-mechanical processing to induce α and ω phase formation, so that the alloy can exhibit the features responsible for both transformation induced plasticity (TRIP) and twinning induced plasticity (TWIP) behaviour during deformation. The alloy thereafter was deformed at different strain rates (10−3, 10−1, 101, 102 s−1) at ambient temperature. At slow strain rate (≤10−3 s−1), in addition to slip the alloy displayed a dominant deformation mechanism with α′′ martensite formation, where mechanical {332}〈113〉β twinning and deformation-induced ω phase were also activated. At an intermediate strain rate, 10−1 s−1, there was a competition between stress-induced phase transformations and stress-induced twinning deformation mechanisms. With increasing strain rate to 101 s−1 or higher; it was found that the dominant deformation mode was twinning. These results have been correlated with the β phase stability of the samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. New thermomechanical strategy for production of high strength low alloyed multiphase steel showing transformation induced plasticity effect10.1179/030192399677031 ↗
2. Phase transformations and mechanical properties of Fe–Mn–Si–Al TRIP-steels
3. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application10.1016/S0749-6419(00)00015-2 ↗
4. Multiple deformation mechanisms of Ti–22.4Nb–0.73Ta–2.0Zr–1.34O alloy10.1063/1.3078521 ↗
5. Electronic structure and phase stability of titanium alloys10.2355/tetsutohagane1955.72.6_555 ↗
6. Theoretical design of titanium alloys
7. Multiple deformation mechanisms of Ti–22.4Nb–0.73Ta–2.0Zr–1.34O alloy10.1063/1.3078521 ↗
8. Formation of zigzag-shaped {112}〈111〉 β mechanical twins in Ti–24.5 Nb–0.7 Ta–2 Zr–1.4 O alloy10.1016/j.scriptamat.2011.10.031 ↗
9. Evolution of deformation mechanisms of Ti–22.4Nb–0.73Ta–2Zr–1.34O alloy during straining10.1016/j.actamat.2010.01.015 ↗
10. Elastic deformation behavior of multi-functional Ti–Nb–Ta–Zr–O alloys10.2320/matertrans.46.3001 ↗
11. Transmission electron microscopic observations of mechanical twinning in metastable beta titanium alloys10.1007/BF02650122 ↗
12. On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects10.1016/j.scriptamat.2012.01.049 ↗
13. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
14. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility10.1016/j.scriptamat.2014.09.005 ↗
15. Transmission Electron microscopy of {332} <113> deformation twin in Ti–15V–3Cr–3Sn–3Al alloy10.2320/matertrans1989.35.843 ↗
16. General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters10.1016/j.scriptamat.2006.04.022 ↗
17. The influence of β phase stability on deformation mode and compressive mechanical properties of Ti–10V–3Fe–3Al alloy10.1016/j.actamat.2014.10.043 ↗
18. Effect of the strain rate on the TRIP–TWIP transition in austenitic Fe-12 pct Mn-0.6 pct C TWIP steel10.1007/s11661-013-2028-9 ↗
19. Effect of iron content on sintering behavior of Ti-V-Fe-Al near-β titanium alloy10.1007/s11661-011-0875-9 ↗
20. Cullity · 2011
21. Formation and reversion of stress induced martensite in Ti–10V–2Fe–3Al10.1016/0001-6160(82)90137-7 ↗
22. Constitutive equations for the room temperature deformation of commercial purity aluminum10.1016/S0924-0136(02)01129-9 ↗
23. Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy10.1007/s11661-005-0284-z ↗
24. Workability of Ti–6Al–4V alloy at high temperatures and strain rates10.1016/j.matlet.2004.06.058 ↗
25. The adiabatic correction factor for deformation heating during the uniaxial compression test10.1361/105994901770344593 ↗
26. Modelling and design of stress-induced martensite formation in metastable Ti alloys10.1016/j.msea.2013.10.003 ↗
27. The omega phase transformation in titanium alloys as an example of displacement controlled reactions10.1016/0001-6160(71)90047-2 ↗
28. The evolution of microstructure and mechanical properties of Ti–5Al–5Mo–5V–2Cr–1Fe during ageing10.1016/j.jallcom.2015.01.005 ↗
29. Omega phase transformation – morphologies and mechanisms10.3139/146.101327 ↗
30. ω-Assisted nucleation and growth of α precipitates in the Ti–5Al–5Mo–5V–3Cr–0.5Fe β titanium alloy10.1016/j.actamat.2009.01.007 ↗
31. The influence of oxygen content on the athermal β-ω transformation10.1016/0036-9748(73)90229-9 ↗
32. Deformation-induced ω phase in nanocrystalline Mo10.1016/j.scriptamat.2012.09.033 ↗
33. Shock-induced deformation twinning and omega transformation in tantalum and tantalum–tungsten alloys10.1016/S1359-6454(00)00287-1 ↗
34. Deformation behavior of age-hardened Ti–Mo alloys10.1016/0001-6160(74)90057-1 ↗
35. Stress-induced products in meta-stable Beta Ti–Mo and Ti–V alloys10.2320/jinstmet1952.42.8_814 ↗
36. Structural relaxation of interface of {332}〈113〉 twin in β Ti alloy10.2320/jinstmet1952.57.12_1471 ↗
37. β Phase decomposition in Ti–5Al–5Mo–5V–3Cr10.1016/j.actamat.2009.04.031 ↗
38. The effect of omega phase on the mechanical properties of titanium alloys10.1007/BF02913423 ↗
39. The concern of elasticity in stress-induced martensitic transformation in NiTi10.1016/S0921-5093(98)00959-9 ↗
40. Interphase-boundary dislocations and the concept of coherency10.1016/0001-6160(79)90081-6 ↗
41. Very high strain-rate response of a NiTi shape-memory alloy10.1016/j.mechmat.2004.03.007 ↗
42. Mobility of martensitic interfaces10.1007/BF02670359 ↗
43. Kinetics of martensitic interface motion
44. Strain rate dependence of deformation mechanisms in a Ni–Ti–Cr shape-memory alloy10.1016/j.actamat.2004.10.001 ↗
45. The effect of strain rate on trigger stress for stress-induced martensitic transformation and yield strength in Ti–18Al–8Nb alloy10.1016/j.jallcom.2010.02.106 ↗
46. Effect of Zr, Sn and Al additions on deformation mode and beta phase stability of metastable beta Ti alloys10.2355/isijinternational.31.807 ↗
47. Thermostatistical modelling of deformation twinning in HCP metals10.1016/j.ijplas.2013.09.006 ↗
48. Rollett · 2004
49. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
50. Effect of strain rate on twinning in a Zr alloy10.1016/j.scriptamat.2013.10.025 ↗
51. Deformation mechanisms of Ti–6Al–4V alloy with a martensitic microstructure subjected to oligocyclic fatigue10.1016/S1359-6454(00)00152-X ↗
52. Deformation twinning of titanium β-alloys of transition class10.1007/s11041-006-0078-y ↗
53. Intersection of deformation twins {332}<113> in titanium beta-alloys
54. Twinning system selection in a metastable β-titanium alloy by Schmid factor analysis10.1016/j.scriptamat.2011.02.033 ↗