Crack initiation mechanisms during very high cycle fatigue of Ni-based single crystal superalloys at high temperature
Source abstract
Abstract
Abstract Crack initiation mechanisms in the very high cycle fatigue (VHCF) regime of nickel-based single-crystal (SX) superalloys have been investigated at high temperature (1000 °C) and under fully reversed conditions (R = −1). For all Ni-based SX alloys tested, a discernible area called rough zone has been identified around the crack initiation site on the fracture surface and is for the first time described. By means of electron microscopy and atom probe analyses, localized and severe plastic activity occurring in the rough zone is evidenced. The high dislocation density provided by the slip bands induces single-phase recrystallized grains and phases precipitation (intermetallics or carbides) via the redistribution of interacting solutes in the rough zone. A crack initiation mechanism based on these observations and on the stress intensity parameter determined around the rough zone – which has been demonstrated to be a constant threshold dependent on the material – is finally proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Evolution of Ni-based superalloys for single crystal gas turbine blade applications10.1016/S1270-9638(99)00108-X ↗
2. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
3. Reed · 2008
4. Damage accumulation during creep deformation of a single crystal superalloy at 1150°C10.1016/j.msea.2006.11.101 ↗
5. Creep of CMSX-4 superalloy single crystals: effects of misorientation and temperature10.1016/S1359-6454(99)00029-4 ↗
6. Creep behaviour of ni-base single-crystal superalloys with various γ′ volume fraction10.1016/j.actamat.2004.04.028 ↗
7. Effect of porosity and eutectics on the high-temperature low-cycle fatigue performance of a nickel-base single-crystal superalloy10.1016/j.scriptamat.2018.06.036 ↗
8. Stress-induced formation of tcp phases during high temperature low cycle fatigue loading of the single-crystal ni-base superalloy ERBO/110.1016/j.actamat.2019.02.022 ↗
9. Effects of microstructure in high temperature fatigue: lifetime to crack initiation of a single crystal superalloy in high temperature low cycle fatigue10.1016/j.ijfatigue.2012.10.013 ↗
10. Fatigue behaviour of cmsx 2 superalloy [001]single crystals at high temperature I: low cycle fatigue of notched specimens10.1016/0921-5093(90)90343-2 ↗
11. Low cycle fatigue of a nickel based superalloy at high temperature: deformation microstructures10.1016/S0921-5093(01)01235-7 ↗
12. High cycle fatigue in aircraft gas turbines—an industry perspective10.1007/BF00012667 ↗
13. Fatigue failure in high-temperature single crystal superalloy turbine blades10.1515/HTMP.2001.20.2.117 ↗
14. Recent developments in ultrasonic fatigue10.1111/ffe.12365 ↗
15. Piezoelectric fatigue testing machines and devices10.1016/j.ijfatigue.2005.09.020 ↗
16. Very high cycle fatigue measuring techniques10.1016/j.ijfatigue.2012.11.016 ↗
17. Mechanism of fatigue crack initiation and propagation in the very high cycle fatigue regime of high-strength steels10.1016/j.scriptamat.2012.07.049 ↗
18. The nature and the mechanism of crack initiation and early growth for very-high-cycle fatigue of metallic materials – an overview10.1016/j.tafmec.2017.05.002 ↗
19. Crack initiation mechanisms of Ti6Al4V in the very high cycle fatigue regime10.1016/j.ijfatigue.2016.04.026 ↗
20. On the mechanism of very high cycle fatigue in Ti–6Al–4V10.1016/j.scriptamat.2008.08.012 ↗
21. Ultrasonic fatigue tests at high temperature on an austenitic steel10.1016/j.jppr.2012.10.008 ↗
22. Crystallographic fatigue crack initiation in nickel-based superalloy rené 88DT at elevated temperature10.1016/j.actamat.2009.08.022 ↗
23. Development of ultrasonic fatigue for rapid, high temperature fatigue studies in turbine engine materials
24. Ultrasonic fatigue of a single crystal ni-base superalloy at 1000°C10.1016/j.msea.2006.08.028 ↗
25. Fatigue strength of a single crystal in the gigacycle regime10.1016/j.ijfatigue.2007.04.003 ↗
26. High-temperature ultrasonic fatigue testing of single-crystal superalloys10.1016/j.matlet.2011.11.066 ↗
27. Very high cycle fatigue of ni-based single-crystal superalloys at high temperature10.1007/s11661-018-4672-6 ↗
28. VHCF life evolution after microstructure degradation of a Ni-based single crystal superalloy10.1016/j.ijfatigue.2017.07.021 ↗
29. Giraud · 2014
30. The precipitation of topologically close-packed phases in rhenium-containing superalloys10.1016/S1359-6454(01)00265-8 ↗
31. CMSX-4® plus single crystal alloy development, characterization and application development
32. Anisotropy in creep properties of DS200 + hf alloy10.1080/09603409.2016.1159836 ↗
33. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
34. Analysis of three-dimensional atom-probe data by the proximity histogram10.1007/S100050010051 ↗
35. Consequences of a room-temperature plastic deformation during processing on creep durability of a ni-based sx superalloy10.1007/s11661-018-4748-3 ↗
36. The effect of chromium and cobalt segregation at dislocations on nickel-based superalloys10.1016/j.scriptamat.2017.10.005 ↗
37. On the segregation of re at dislocations in the γ’ phase of ni-based single crystal superalloys10.1016/j.mtla.2018.09.018 ↗
38. Microstructural degradation of polycrystalline superalloys from oxidized carbides and implications on crack initiation10.1016/j.scriptamat.2017.12.028 ↗
39. Atomistic phase field chemomechanical modeling of dislocation-solute-precipitate interaction in ni–al–co10.1016/j.actamat.2019.06.008 ↗
40. Dislocation motion in the presence of diffusing solutes: a computer simulation study10.1016/S1359-6454(00)00035-5 ↗
41. Effect of solutes on dislocation motion —a phase-field simulation10.1016/S0749-6419(03)00094-9 ↗
42. A review on fatigue fracture modes of structural metallic materials in very high cycle regime10.1016/j.ijfatigue.2016.05.029 ↗
43. On the crystallographic, stage I-like, character of fine granular area formation in internal fish-eye fatigue cracks10.1016/j.ijfatigue.2017.09.013 ↗
44. There is no infinite fatigue life in metallic materials10.1046/j.1460-2695.1999.00183.x ↗
45. Subsurface crack initiation and propagation mechanisms in gigacycle fatigue10.1016/j.actamat.2010.07.022 ↗
46. A general scenario of fish-eye crack initiation on the life of high-strength steels in the very high-cycle fatigue regime10.1111/ffe.13104 ↗
47. On the mechanism of fatigue failure in the superlong life regime (N>107 cycles). Part II: influence of hydrogen trapped by inclusions10.1046/j.1460-2695.2000.00343.x ↗
48. High-cycle rotating bending fatigue property in very long-life regime of high-strength steels10.1046/j.1460-2695.2002.00575.x ↗
49. On the formation mechanisms of fine granular area (FGA) on the fracture surface for high strength steels in the vhcf regime10.1016/j.ijfatigue.2015.08.021 ↗
50. Mechanism of fatigue failure in ultralong life regime10.1046/j.1460-2695.2002.00576.x ↗
51. Effect of inclusion on subsurface crack initiation and gigacycle fatigue strength10.1016/S0142-1123(02)00037-3 ↗
52. Fatigue crack propagation behaviour derived from s–n data in very high cycle regime10.1046/j.1460-2695.2002.00547.x ↗
53. Characteristic s–n properties of high-carbon–chromium-bearing steel under axial loading in long-life fatigue10.1046/j.1460-2695.2002.00574.x ↗
54. Prediction of threshold value for fga formation10.1016/j.msea.2011.05.070 ↗
55. Effects of defects, inclusions and inhomogeneities on fatigue strength10.1016/0142-1123(94)90001-9 ↗
56. Fatigue crack growth behavior of pwa 1484 single crystal superalloy at elevated temperatures
57. Resolved shear stress intensity coefficient and fatigue crack growth in large crystals10.1016/0167-8442(88)90003-1 ↗
58. Fatigue crack path prediction in udimet 720 nickel-based alloy single crystals10.1007/s11661-000-0058-6 ↗
59. Lifetime modelling of fatigue crack initiation from casting defects
60. Mataveli Suave · 2017
61. Creep-fatigue small crack propagation in a single crystal ni-base superalloy, CMSX-2: microstructural influences and environmental effects10.1016/S0142-1123(99)00058-4 ↗
62. The growth of small cracks in the single crystal superalloy CMSX-4 at 750 and 1000°C
63. Benefits of high gradient solidification for creep and low cycle fatigue of AM1 single crystal superalloy10.1016/j.msea.2015.07.045 ↗
64. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
65. Assessment of small fatigue crack growth driving forces in single crystals with and without slip bands10.1007/s10704-012-9726-y ↗
66. Deformation and damage mechanisms during thermal–mechanical fatigue of a single-crystal superalloy10.1016/j.actamat.2009.01.027 ↗
67. Damage mechanisms of a high-Cr single crystal superalloy during thermomechanical fatigue10.1016/j.msea.2009.08.023 ↗
68. The role of oxidized carbides on thermal-mechanical performance of polycrystalline superalloys10.1007/s11661-018-4709-x ↗
69. Effect of pre-strain on microstructural evolution during thermal exposure of single crystal superalloy CMSX-410.1016/S1003-6326(11)60855-8 ↗
70. Correlative microscopy—novel methods and their applications to explore 3D chemistry and structure of nanoscale lattice defects: a case study in superalloys10.1007/s11837-018-2802-7 ↗
71. On the diffusive phase transformation mechanism assisted by extended dislocations during creep of a single crystal coni-based superalloy10.1016/j.actamat.2018.05.074 ↗
72. On the atomic solute diffusional mechanisms during compressive creep deformation of a co-al-w-ta single crystal superalloy10.1016/j.actamat.2019.11.035 ↗
73. Elemental segregation to antiphase boundaries in a crept coni-based single crystal superalloy10.1016/j.scriptamat.2018.07.042 ↗
74. Tensile properties at intermediate temperature of ni-based single crystal superalloys after microstructure degradation
75. Relationships between microstructural instabilities and mechanical behaviour in new generation nickel-based single crystal superalloys
76. The effect of stress on the microstructural stability of CMSX-10 single crystal ni-base superalloys10.1016/j.scriptamat.2005.09.007 ↗
77. Fatigue deformation in a polycrystalline nickel base superalloy at intermediate and high temperature: competing failure modes10.1016/j.actamat.2018.03.035 ↗
78. A study of fatigue damage mechanisms in waspaloy from 25 to 800°C10.1016/0025-5416(84)90177-0 ↗
79. Precipitation and growth of carbide particles in a cyclically strained low-carbon steel10.1016/0001-6160(73)90076-X ↗
80. Prestraining effect on creep behaviour of nickel base C263 superalloy10.1179/026708302225004838 ↗
81. The role of local plasticity during very high cycle fatigue crack initiation in high-strength steels10.1016/j.ijfatigue.2018.02.008 ↗
82. On the mechanism of fatigue failure in the superlong life regime (N>107 cycles). Part 1: influence of hydrogen trapped by inclusions10.1046/j.1460-2695.2000.00328.x ↗
83. The effect of vacuum-like environment inside sub-surface fatigue crack on the formation of oda fracture surface in high strength steel10.1016/j.proeng.2010.03.228 ↗