journal article·2017-10

Nucleation and preferential growth mechanism of recrystallization texture in high purity binary magnesium-rare earth alloys

Aidin Imandoust, Christopher D. Barrett, Andrew L. Oppedal, Wilburn R. Whittington, Yubraj Paudel, Haitham El Kadiri

Acta Materialia· Volume 138
Publisher page

Abstract

Abstract We investigated the effect of rare-earth element on recrystallization textures using Mg-Ce and Mg-Gd binary alloys at various concentrations of Ce and Gd, and employing electron backscattered diffraction – EBSD technique. Our results indicate that the rare earth element concentration required to noticeably alter recrystallization texture depends primarily on the processing conditions, and cannot be regarded only from the concentration standpoint. Rare earth element additions and stored energy from deformation work in combination to alter texture in rare earth element containing magnesium alloys. The nucleation stage of dynamic recrystallization was explored in samples with partially recrystallized microstructures, revealing necklace structures of small grains forming continuously along the boundaries of pancake-shaped grains in the extrusion direction. Stochastic relaxation of basal " open=" a , pyramidal " open=" c + a , and prismatic " open=" a dislocations into low-angle grain boundaries produced chains of new dynamically recrystallized embryos with nearly random orientations. A remarkable grain-size driven textural transition occurs from a predominant band in the inverse pole figures where the " open=" c -axis is oriented 35–65°away from the extrusion direction to a hot spot between " open=" 11 2 ¯ 1 − " open=" 11 2 ¯ 3 | | E D texture components. EBSD observations showed that Mg-Gd alloys have a slower textural transition rate due to the stronger grain refining potential of Gd compared to Ce. These results suggest that the formation of band-like texture patterns in the inverse pole figures is associated with the recovery of basal/ " open=" c + a dislocations, while transition to a hot spot in texture is a result of preferential grain growth, which was made possible by an effect related to the presence of rare earth elements in the grain boundaries. We investigated the growth behavior during dynamic and static recrystallization. Schmid factor analysis showed a lower net activation of dislocations in " open=" 11 2 ¯ 1 − " open=" 11 2 ¯ 3 | | E D grains compared to " open=" 10 1 ¯ 1 − " open=" 10 1 ¯ 2 | | E D grains. Lower dislocation densities within RE " open=" 11 2 ¯ 1 − " open=" 11 2 ¯ 3 | | E D grains favor their growth by setting the boundary migration direction toward grains with higher dislocation density, thereby decreasing the system energy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Magnesium: properties—applications—potential10.1016/S0921-5093(00)01351-4 ↗
2. Magnesium alloys and applications10.1179/mst.1994.10.1.1 ↗
3. Flow localization during severe plastic deformation of AZ81 magnesium alloy: micro-shear banding phenomenon10.1016/j.msea.2013.05.069 ↗
4. Compressive deformation behavior at room temperature – 773K in Mg–0.2mass%(0.035at.%)Ce alloy10.1016/j.actamat.2007.09.036 ↗
5. Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2wt%(0.035at%)Ce10.1016/j.msea.2008.04.059 ↗
6. Texture evolution during large-strain hot rolling of the Mg AZ61 alloy10.1016/S0921-5093(03)00043-1 ↗
7. Why are twins profuse in magnesium?10.1016/j.actamat.2014.11.033 ↗
8. The effect of twin–twin interactions on the nucleation and propagation of twinning in magnesium10.1016/j.actamat.2013.02.030 ↗
9. A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys10.1007/s10853-016-0371-0 ↗
10. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y10.1016/S1359-6454(01)00297-X ↗
11. Connections between the basal I1 “growth” fault and 〈c+a〉 dislocations10.1016/j.actamat.2014.07.056 ↗
12. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
13. Enhanced ductility in strongly textured magnesium produced by equal channel angular processing10.1016/j.scriptamat.2003.10.006 ↗
14. Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling10.1016/S1359-6462(02)00591-2 ↗
15. Deformation microstructures and textures of some cold rolled Mg alloys10.1016/S0921-5093(04)00942-6 ↗
16. Twinning and the ductility of magnesium alloys10.1016/j.msea.2007.02.109 ↗
17. Sheet texture modification in magnesium-based alloys by selective rare earth alloying10.1016/j.msea.2011.01.080 ↗
18. Softening and dynamic recrystallization in magnesium single crystals during c-axis compression10.1016/j.actamat.2011.10.013 ↗
19. Triggering rare earth texture modification in magnesium alloys by addition of zinc and zirconium10.1016/j.actamat.2013.12.015 ↗
20. Shear band-related recrystallization and grain growth in two rolled magnesium-rare earth alloys10.1016/j.msea.2013.04.076 ↗
21. Effect of rare earth elements on the microstructure and texture development in magnesium–manganese alloys during extrusion10.1016/j.msea.2010.07.081 ↗
22. The texture and anisotropy of magnesium–zinc–rare earth alloy sheets10.1016/j.actamat.2006.11.013 ↗
23. Rokhlin · 2003
24. Micro-alloying Mg with Y, Ce, Gd and La for texture modification—a comparative study10.1016/j.msea.2009.12.036 ↗
25. The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
26. Influence of cerium on the texture and ductility of magnesium extrusions10.1016/j.scriptamat.2008.05.019 ↗
27. The relation between ductility and stacking fault energies in Mg and Mg–Y alloys10.1016/j.actamat.2012.02.006 ↗
28. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys10.1016/j.actamat.2010.08.031 ↗
29. Basal and prism dislocation cores in magnesium: comparison of first-principles and embedded-atom-potential methods predictions10.1088/0965-0393/17/5/055012 ↗
30. Dynamic recrystallization of Mg and Mg–Y alloys: crystallographic texture development10.1016/j.msea.2007.08.016 ↗
31. Influence of texture on dynamic recrystallization and deformation mechanisms in rolled or ECAPed AZ31 magnesium alloy10.1016/j.msea.2007.11.024 ↗
32. The effect of Gd on the recrystallisation, texture and deformation behaviour of magnesium-based alloys10.1016/j.actamat.2010.09.003 ↗
33. Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys10.1016/j.scriptamat.2008.06.008 ↗
34. Effects of solute and second-phase particles on the texture of Nd-Containing Mg alloys10.1007/s11661-011-1018-z ↗
35. Role of solute in the texture modification during hot deformation of Mg-Rare earth alloys10.1007/s11661-011-0923-5 ↗
36. Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets10.1016/j.scriptamat.2009.12.033 ↗
37. Effect of extrusion conditions on microstructure, texture, and yield asymmetry in Mg–6Y–7Gd–0.5wt%Zr alloy10.1016/j.msea.2011.05.075 ↗
38. Unraveling recrystallization mechanisms governing texture development from rare earth element additions to magnesium
39. The role of atomic scale segregation in designing highly ductile magnesium alloys10.1016/j.actamat.2016.06.024 ↗
40. Texture weakening effects in Ce-Containing Mg alloys10.1007/s11661-012-1486-9 ↗
41. Tensile-compressive yield asymmetries in high strength wrought magnesium alloys10.1016/0956-716X(94)90159-7 ↗
42. Promotion of texture weakening in magnesium by alloying and thermomechanical processing: (I) alloying10.1007/s10853-013-7826-3 ↗
43. Dynamic recrystallization during high temperature deformation of magnesium10.1016/j.msea.2008.02.004 ↗
44. Texture evolution during cold rolling of dilute Mg alloys10.1016/j.scriptamat.2015.06.009 ↗
45. Texture evolution during static recrystallization of cold-rolled magnesium alloys10.1016/j.actamat.2015.12.045 ↗
46. The origin and enhancement of texture during heat treatment of rolled AZ31B magnesium alloys10.1016/j.actamat.2015.04.043 ↗
47. Microstructure and texture development during hydrostatic extrusion of magnesium alloy AZ3110.1016/j.scriptamat.2005.03.036 ↗
48. The effect of rare earth elements on the behaviour of magnesium-based alloys: Part 1—hot deformation behaviour10.1016/j.msea.2012.12.023 ↗
49. Evaluating the effect of yttrium as a solute strengthener in magnesium using in situ neutron diffraction10.1016/j.actamat.2014.06.023 ↗
50. Solute segregation and texture modification in an extruded magnesium alloy containing gadolinium10.1016/j.scriptamat.2011.08.012 ↗
51. Homogenization of grain boundary energy in magnesium by yttrium segregation
52. Effect of grain boundaries on texture formation during dynamic recrystallization of magnesium alloys10.1016/j.actamat.2017.01.063 ↗
53. Grain breakup during elevated temperature deformation of an HCP metal10.1007/s11661-015-2812-9 ↗
54. Dynamic recrystallization in pure magnesium10.2320/matertrans.42.1928 ↗
55. Rollett · 2004
56. First-principles study of self-diffusion in hcp Mg and Zn10.1016/j.commatsci.2010.08.019 ↗
57. First-principles calculations of impurity diffusion coefficients in dilute Mg alloys using the 8-frequency model10.1016/j.actamat.2011.01.062 ↗
58. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes10.1007/s11661-010-0410-4 ↗
59. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗