journal article·2006-12

A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature

R. Goodall, T.W. Clyne

Acta Materialia· Volume 54· Issue 20
Publisher page

Abstract

Nanoindentation is being increasingly used to obtain creep parameters. The technique allows interrogation of small volumes and relatively rapid acquisition of data. However, the reliability of the methods used to extract creep parameters from experimental data is largely unproven. In the present work, commonly employed procedures are applied to a wide range of materials, for which the creep parameters are already known. The correlation observed between known values of the stress exponent, n, and those obtained using the indentation method is generally very poor. Possible reasons for this are considered. One concern is that primary creep, or other unsteady deformation mechanisms, may be strongly influencing the observed behaviour throughout the test. Taking such uncertainties into account, a procedure is proposed for ranking creep propensities exhibited during nanoindentation under specified conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
2. Hardness, toughness and brittleness: an indentation analysis10.1111/j.1151-2916.1979.tb19075.x ↗
3. Micro impact testing: a new technique for investigating thin film toughness, adhesion erosive wear resistance and dynamic hardness10.1179/026708401101517755 ↗
4. Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results10.1016/S0257-8972(01)01340-8 ↗
5. An experimental investigation of the deformed zone associated with indentation hardness impressions10.1016/0022-5096(57)90056-X ↗
6. The deformation of metals by Vickers-type pyramidal indenters10.1016/0022-5096(59)90013-4 ↗
7. Plastic flow in glass10.1098/rspa.1964.0114 ↗
8. Hill · 1950
9. The correlation of indentation experiments10.1016/0022-5096(70)90029-3 ↗
10. Creep and hardness of metals: a physical study
11. Indentation of a power law creeping solid10.1098/rspa.1993.0050 ↗
12. Indentation hardness and the creep of solids
13. Characterisation of submicrometre surface layers by indentation
14. A micro-indentation study of superplasticity in Pb, Sn, and Sn–38wt.% Pb10.1016/0001-6160(88)90319-7 ↗
15. The relationship between indentation and uniaxial creep in amorphous selenium10.1557/JMR.1995.2024 ↗
16. Assessment and use of creep rupture properties
17. Thermal stability and mechanical properties of a Zr-based bulk amorphous alloy10.1016/j.msea.2004.01.088 ↗
18. Temperature dependance of the hardness of pure metals
19. Indentation creep
20. Impression creep; a new test10.1007/BF00552241 ↗
21. Impression creep and other localised tests10.1016/S0921-5093(01)01116-9 ↗
22. Repeated load relaxations of type-316 austenitic stainless-steel10.1016/0036-9748(84)90512-X ↗
23. Indentation load relaxation experiments with indentation depth in the submicron range10.1557/JMR.1990.2100 ↗
24. Indentation power-law creep of high-purity indium10.1007/s11661-999-0051-7 ↗
25. Mechanical properties of nanophase TiO2 as determined by nanoindentation10.1557/JMR.1990.1073 ↗
26. An investigation of the creep processes in tin and aluminium using a depth-sensing indentation technique10.1557/JMR.1992.0627 ↗
27. Nano-scale indentation creep testing at non-ambient temperature10.1080/00218469808011105 ↗
28. Frost · 1982
29. Finite element analysis of the critical ratio of coating thickness to indentation depth for coating property measurements by nanoindentation10.1016/0040-6090(94)06357-5 ↗
30. 3D simulation of a nanoindentation test at a mesoscopic scale10.1016/S0921-5093(97)00362-6 ↗
31. Modeling of nanoindentation of bulk and thin film by finite element method10.1016/j.wear.2004.05.021 ↗
32. The mechanisms of indentation creep10.1016/0956-7151(91)90043-Z ↗
33. The elastic, plastic and time dependent properties of thin films as determined by ultra low load indentation10.1557/PROC-239-337 ↗
34. Transient creep analysis of ball indentation10.1016/0020-7403(95)00016-Q ↗
35. Metallic materials – instrumented indentation test for hardness and materials parameters – part 1: test method. In: International Standard ISO 14577-1; 2002.