Control of nanoscale precipitation and elimination of intermediate-temperature embrittlement in multicomponent high-entropy alloys
Source abstract
Abstract
Abstract Thermally stable high-entropy alloys (HEAs) consisting of a high density of coherent precipitates show a great potential for high-temperature applications. In this work, we systematically investigated the phase stability and coarsening kinetics of L12-type coherent precipitates in a Ni-30Co-13Fe-15Cr-6Al-6Ti-0.1B (at.%) HEA isothermally aged at 800, 900 and 1000 °C. Aged microstructures in the grain interiors under this temperature range were essentially dominated by the uniform precipitation of multicomponent L12 (Ni, Co, Fe, Cr)3(Ti, Al)-type precipitates. The coarsening kinetics of these intragranular L12 precipitates were quantitatively determined, which were adequately characterized by the classical Lifshitz-Slyozov-Wagner model. The activation energy for coarsening was determined to be 378 kJ/mol, which is relatively higher than that of conventional Ni or Co-based superalloys, suggesting a slow elemental diffusion in the HEA matrix. More importantly, the heterogeneous precipitation and the associated metastable phase transformation mechanism along grain boundaries (GBs) were carefully analyzed. Localized chemical heterogeneity was identified within the discontinuous L12 phase at the GBs, which thermodynamically destabilizes the L12 structure and encourages the formation of brittle Heusler phase. Finally, we establish a unique duplex-aging strategy that can be efficiently utilized for GB stabilization, by which these detrimental intergranular heterostructures can be greatly eliminated, leading to an exceptional resistance to intermediate-temperature embrittlement, along with enhanced tensile strengths. These findings will not only shed light on the precipitation mechanisms in compositionally complex HEAs but also generate new opportunities to the interfacial design of HEAs for advanced high-temperature applications with superior properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Nanostructured high‐entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
3. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
4. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
5. The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.08.072 ↗
6. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
7. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
8. L12-strengthened high-entropy alloys for advanced structural applications10.1557/jmr.2018.186 ↗
9. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
10. High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys10.1038/s41467-018-06600-8 ↗
11. Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy10.1016/j.scriptamat.2019.01.034 ↗
12. Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures10.1016/j.actamat.2018.11.049 ↗
13. Thermal stability and coarsening of coherent particles in a precipitation-hardened (NiCoFeCr) 94 Ti 2 Al 4 high-entropy alloy10.1016/j.actamat.2018.01.049 ↗
14. The high temperature tensile and creep behaviors of high entropy superalloy10.1038/s41598-017-13026-7 ↗
15. On the path to optimizing the Al-Co-Cr-Cu-Fe-Ni-Ti high entropy alloy family for high temperature applications10.3390/e18040104 ↗
16. Exceptional nanostructure stability and its origins in the CoCrNi-based precipitation-strengthened medium-entropy alloy10.1080/21663831.2019.1568315 ↗
17. High-entropy alloys: potential candidates for high-temperature applications - an overview10.1002/adem.201700645 ↗
18. Precipitation behavior and its effects on tensile properties of FeCoNiCr high-entropy alloys10.1016/j.intermet.2016.09.005 ↗
19. The evolution of microstructures and high temperature properties of AlxCo1.5CrFeNi1.5Tiy high entropy alloys10.1016/j.jallcom.2015.09.042 ↗
20. Design of novel precipitate-strengthened Al-Co-Cr-Fe-Nb-Ni high-entropy superalloys10.1007/s11661-017-4399-9 ↗
21. Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates10.1016/j.scriptamat.2018.01.028 ↗
22. Influence of γ′ and grain boundary carbide on tensile fracture behaviors of nimonic 26310.1016/j.msea.2009.06.011 ↗
23. Intermediate temperature brittleness of Ni based superalloy nimonic26310.1016/j.matchar.2018.03.013 ↗
24. Intermediate temperature embrittlement of one new Ni-26W-6Cr based superalloy for molten salt reactors10.1016/j.msea.2016.04.032 ↗
25. Effects of temperature and strain rate on tensile deformation behavior of superalloy UNS N1027610.1016/j.msea.2017.05.085 ↗
26. Alloy design and properties optimization of high-entropy alloys10.1007/s11837-012-0366-5 ↗
27. A geometric model for intrinsic residual strain and phase stability in high entropy alloys10.1016/j.actamat.2015.04.051 ↗
28. Solid solution or intermetallics in a high-entropy alloy10.1002/adem.200900057 ↗
29. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys10.1016/j.actamat.2013.01.042 ↗
30. Accelerated exploration of multi-principal element alloys with solid solution phases10.1038/ncomms7529 ↗
31. Ductilizing brittle high-entropy alloys via tailoring valence electron concentrations of precipitates by controlled elemental partitioning10.1080/21663831.2018.1518276 ↗
32. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
33. Kinetics pathway of precipitation in model Co-Al-W superalloy10.1016/j.actamat.2017.12.032 ↗
34. γ’-(L12) precipitate evolution during isothermal aging of a Co Al W Ni superalloy10.1016/j.actamat.2018.11.014 ↗
35. Stability of L21 (NiM)2TiAl (M=Co, Fe) in high-entropy alloys10.1016/j.jallcom.2018.06.113 ↗
36. Formation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy10.1016/j.scriptamat.2014.12.006 ↗
37. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
38. Ostwald ripening in multicomponent alloys10.1016/j.actamat.2013.03.049 ↗
39. Nano-sized precipitate stability and its controlling factors in a NiAl-strengthened ferritic alloy10.1038/srep16081 ↗
40. On the high temperature coarsening kinetics of γ′ precipitates in a high strength Co37. 6Ni35. 4Al9. 9Mo4. 9Cr5. 9Ta2. 8Ti3. 5 fcc-based high entropy alloy10.1016/j.actamat.2019.07.011 ↗
41. Diffusion of solutes in fcc cobalt investigated by diffusion couples and first principles kinetic Monte Carlo10.1016/j.actamat.2016.01.028 ↗
42. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
43. The equilibrium shape of a misfitting precipitate10.1016/0956-7151(94)90036-1 ↗
44. Elastic properties (the stiffness constants, the shear modulus and the dislocation line energy and tension) of Ni Al solid solutions and of the nimonic alloy PE1610.1016/0025-5416(83)90001-0 ↗
45. Grain boundary discontinuous precipitation reactions10.1179/imr.1981.26.1.153 ↗
46. The formation of cellular precipitate and its effect on the tensile properties of a precipitation strengthened high entropy alloy10.1016/j.matchemphys.2017.09.057 ↗
47. Discontinuous cellular precipitation in a high-refractory nickel-base superalloy10.1007/s11661-997-0001-1 ↗
48. Discontinuous precipitation in Cu-Co alloys10.1016/0001-6160(81)90086-9 ↗
49. Discontinuous and continuous precipitation in magnesium–aluminium type alloys10.1016/j.jallcom.2008.11.008 ↗
50. Estimation of grain boundary segregation enthalpy and its role in stable nanocrystalline alloy design10.1557/jmr.2013.211 ↗
51. Non-equilibrium grain-boundary segregation in austenitic alloys10.1007/BF00738626 ↗
52. Effect of grain size on grain boundary segregation10.1016/0925-8388(95)02094-2 ↗
53. Role of base-metal composition in isothermal solidification during diffusion brazing of nickel-based superalloys10.1080/13621718.2017.1327934 ↗
54. Effect of cellular structure on the mechanical property of Al0.2Co1.5CrFeNi1.5Ti0.3 high-entropy alloy10.1016/j.matchemphys.2017.10.064 ↗
55. Phase transformation strengthening of high-temperature superalloys10.1038/ncomms13434 ↗