A constitutive model for fcc single crystals based on dislocation densities and its application to uniaxial compression of aluminium single crystals
Source abstract
Abstract
Abstract A new dislocation density based constitutive model for fcc single crystals at elevated temperatures is developed. In addition to former composite models [Acta Mater 48 (2000) 4181; J Mater Proc Technol 123 (2002) 155; Acta Metall Mater 41 (1993) 589; Acta Metal 31 (1983) 1367] it distinguishes the individual slip systems and thus directly accounts for latent hardening. This distinction is an essential prerequisite for a later implementation into crystal plasticity finite element models. The model is applied to hot compression tests of aluminium single crystals with their 〈1 1 0〉 axis parallel to the compression axis. The predicted stress strain curves fit the experimental observations very well for a strain rate range from 1×10 −5 to 1×10 −1 s −1 and a temperature range from 623 to 723 K using a single set of parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Computational homogenization analysis in finite plasticity simulation of texture development in polycrystalline materials10.1016/S0045-7825(98)00218-7 ↗
2. Laws of work-hardening and low temperature creep10.1115/1.3443340 ↗
3. Work hardening in heteroheneneous alloys – a microstructural approach based on three internal state variables10.1016/S1359-6454(00)00289-5 ↗
4. Development and application of constitutive equations for the multiple-stand hot rolling of Al-alloys10.1016/S0924-0136(02)00081-X ↗
5. A simple model for dislocation behaviour, strain and strain rate hardening evolution in deforming aluminium alloys10.1016/S0749-6419(01)00015-8 ↗
6. Evolution of FCC deformation structures in polyslip10.1016/0956-7151(92)90296-Q ↗
7. A model for rolling deformation with grain subdivision. Part I: the initial stage10.1016/S0749-6419(00)00059-0 ↗
8. Deformation structures in lightly rolled pure aluminium10.1016/0921-5093(89)90325-0 ↗
9. A model for rolling deformation with grain subdivision. Part II: the subsequent stage10.1016/S0749-6419(00)00059-0 ↗
10. Cold hardening in stages IV and V of FCC metals-I. Experiments and interpretation10.1016/0956-7151(93)90088-A ↗
11. Effect of grain size on substructural evolution and plastic behavior of copper10.1016/0921-5093(89)90061-0 ↗
12. The double effect of grain size on the work-hardening behavior of polycrystalline copper10.1016/0956-716X(94)90024-8 ↗
13. Cold hardening in stages IV and V of FCC metals-II. Model fites and physical results10.1016/0956-7151(93)90089-B ↗
14. An alternative approach to finite plasticity based on material isomorphisms10.1016/S0749-6419(98)00074-6 ↗
15. A new concept for the calculation of the mobile dislocation density in constitutive models10.1002/pssb.200301873 ↗
16. Mughrabi H. Plastic deformation and fracture of materials. In: Haël Mughrabi, editor. Materials science and technology, vol. 6; 1993
17. Gottstein · 2001
18. The relationship between stress and strain for homogeneous deformation
19. Thermal activation analysis of dislocations in obstacle fields10.1016/S0927-0256(96)00066-3 ↗
20. Roters F. Realisierung eines Mehrebenenkonzeptes in der Plastizitätsmodellierung, PhD Thesis. RWTH Aachen, Shaker Verlag Aachen; 1999
21. Elasto-viscoplastic constitutive equations for polycrystalline fcc materials at low homologous temperatures10.1016/S0022-5096(01)00022-9 ↗
22. Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals10.1016/0001-6160(83)90007-X ↗