Mapping the parent austenite orientation reconstructed from the orientation of martensite by EBSD and its application to ausformed martensite
Source abstract
Abstract
Abstract A new method is developed for reconstruction of the local orientation of the parent austenite based on the orientation of lath martensite measured by electron backscattered diffraction. The local orientation of austenite was obtained by least squares fitting as the difference between the experimental data and the predicted martensite orientation was minimal, assuming the specific orientation relationship (OR) between martensite and the parent austenite. First, the average OR between austenite and lath martensite was precisely determined and it was shown that both close packed planes and directions between martensite and the parent austenite deviated by more than 1° in low carbon martensite. The quality of the reconstructed austenite orientation map depended strongly on the OR used for the calculation. When Kurdjumov–Sachs (K–S) or Nishiyama–Wasserman (N–W) ORs were used the austenite orientation was frequently mis-indexed as a twin orientation with respect to the true orientation because of the mirror symmetry of (0 1 1)α stacking in the K–S or N–W ORs. In contrast, the frequency of mis-indexing was significantly reduced by using the measured OR, where the close packed planes and directions were not parallel. The deformation structure in austenite was successfully reconstructed by applying the proposed method to ausformed martensite in low carbon steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Mader · Trans ASM · 1967 · 60 · 651
2. Morito · Acta Mater · 2003 · 51 · 178910.1016/S1359-6454(02)00577-3 ↗
3. Matsuda · 1971
4. Guo · Acta Mater · 2004 · 52 · 551110.1016/j.actamat.2004.08.011 ↗
5. Tamura · J Phys · 1982 · C4 · 551
6. Maki T, Tamura I. In: Proceedings of the international conference on physical metallurgy of thermomechanical processing of steels and other metals (THERMEC-88). Tokyo: The Iron and Steel Institute of Japan; 1988. p. 458.
7. Morito · J Phys IV France · 2003 · 112 · 45310.1051/jp4:2003923 ↗
8. Kawata · Mater Sci Eng A · 2006 · 438–440 · 14010.1016/j.msea.2006.02.175 ↗
9. Humbert · J Appl Crystallogr · 1995 · 28 · 57110.1107/S0021889895004067 ↗
10. Humbert · J Appl Crystallogr · 2002 · 35 · 40110.1107/S0021889802005824 ↗
11. Gey · J Mater Sci · 2003 · 38 · 128910.1023/A:1022842712172 ↗
12. Glavicic · Mater Sci Eng A · 2003 · 346A · 5010.1016/S0921-5093(02)00535-X ↗
13. Glavicic · Mater Sci Eng A · 2003 · 351A · 25810.1016/S0921-5093(02)00844-4 ↗
14. Cayron · Mater Charact · 2006 · 57 · 38610.1016/j.matchar.2006.03.008 ↗
15. Morimoto · Tetsu to Hagane · 2007 · 93 · 59110.2355/tetsutohagane.93.591 ↗
16. Blaineau · Solid State Phen · 2010 · 160 · 20310.4028/www.scientific.net/SSP.160.203 ↗
17. Miyamoto · Scripta Mater · 2009 · 60 · 111310.1016/j.scriptamat.2009.02.053 ↗
18. Miyamoto · Acta Mater · 2009 · 57 · 112010.1016/j.actamat.2008.10.050 ↗
19. Morito · Acta Mater · 2006 · 54 · 532310.1016/j.actamat.2006.07.009 ↗
20. Kelly · Acta Metall Mater · 1990 · 38 · 107510.1016/0956-7151(90)90180-O ↗
21. Steven · JISI · 1956 · 183 · 349
22. Regle H, Maruyama N, Yoshinaga N. In: Proceedings of the international conference on advanced high strength sheet steels for automotive applications; 2004. p. 239.
23. Olson · Metall Trans A · 1976 · 7A · 1897