Design of D022 superlattice with superior strengthening effect in high entropy alloys
Source abstract
Abstract
Abstract Precipitation strengthening is one of the most promising mechanisms to develop high-performance high entropy alloys (HEAs). However, the design of a reinforcing phase with an excellent strengthening effect is still one of the most pivotal challenges. In the present study, a design strategy based on overall valence electron concentration (OVEC) is developed, and a coherent D022 superlattice (noted as γ″ phase) with superior strengthening effect is designed. The newly developed γ″ phase is systematically characterized using transmission electron microscope and atom probe tomography. Differentiating from the traditional Ni3Nb γ″ phase, the present high-entropy γ″ phase contains ∼7.7% Co and follows the (Ni,Co,Cr,Fe)3(Nb,Fe) stoichiometry. Three γ″ phase variants are observed with crystallographic orientation relationships of [001]γ″// γ and (001)γ″//{100}γ. The lenticular γ″ particles with small volume fraction (7%) causes a significant yield strength increase (670 MPa) and ductility retention (40%), resulting in excellent yield strength-ductility combination. The excellent strengthening effect of the γ″ phase is attributed to both ordering strengthening and coherency strengthening. The present study proposes a new design strategy of precipitates and develops a superior reinforcing phase for HEAs. These findings will not only promote the development of precipitation-hardened HEAs but deepen the fundamentals of precipitates design for other complex concentrated alloys as well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
3. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
4. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
5. Hexagonal high-entropy alloys10.1080/21663831.2014.951493 ↗
6. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
7. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy10.1038/ncomms15719 ↗
8. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
9. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
10. The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy10.1016/j.actamat.2017.04.033 ↗
11. Mechanism of radiation damage reduction in equiatomic multicomponent single phase alloys10.1103/PhysRevLett.116.135504 ↗
12. Microstructure and electrochemical properties of high entropy alloys—a comparison with type-304 stainless steel10.1016/j.corsci.2004.11.008 ↗
13. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy10.1016/j.actamat.2016.01.050 ↗
14. Geddes · 2010
15. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
16. The phase stability of Ni2CrFeMox multi-principal-component alloys with medium configurational entropy10.1016/j.matdes.2015.06.174 ↗
17. Annealing effects on the microstructure and properties of bulk high-entropy CoCrFeNiTi 0.5 alloy casting ingot10.1016/j.intermet.2013.08.016 ↗
18. Recrystallization behavior of CoCrCuFeNi high-entropy alloy10.1007/s11661-014-2594-5 ↗
19. Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy10.1016/j.scriptamat.2012.12.002 ↗
20. Fcc nanostructured TiFeCoNi alloy with multi-scale grains and enhanced plasticity10.1016/j.scriptamat.2017.09.023 ↗
21. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
22. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
23. Tuning the defects in face centered cubic high entropy alloy via temperature-dependent stacking fault energy10.1016/j.scriptamat.2018.06.002 ↗
24. Metastability in high-entropy alloys: a review10.1557/jmr.2018.306 ↗
25. Strengthening the CoCrFeNiNb0.25 high entropy alloy by FCC precipitate10.1016/j.jallcom.2016.01.153 ↗
26. L12-strengthened high-entropy alloys for advanced structural applications
27. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
28. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
29. Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates10.1016/j.ijplas.2017.10.005 ↗
30. Precipitation-hardened high entropy alloys with excellent tensile properties10.1016/j.msea.2018.06.102 ↗
31. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
32. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
33. Precipitation strengthening of ductile Cr15Fe20Co35Ni20Mo10 alloys10.1016/j.scriptamat.2017.05.019 ↗
34. Yielding behavior of a γy-precipitation strengthened Co Ni Cr Nb Fe alloy10.1007/BF02648511 ↗
35. Precipitation hardening10.1007/BF02670416 ↗
36. Elemental phase partitioning in the γ-γ″ Ni2CoFeCrNb0.15 high entropy alloy10.3390/e20120910 ↗
37. Ductile ordered intermetallic alloys10.1126/science.226.4675.636 ↗
38. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
39. Ductilizing brittle high-entropy alloys via tailoring valence electron concentrations of precipitates by controlled elemental partitioning10.1080/21663831.2018.1518276 ↗
40. Abnormal γ″ - ε phase transformation in the CoCrFeNiNb0.25 high entropy alloy10.1016/j.scriptamat.2017.12.009 ↗
41. Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates10.1016/j.scriptamat.2018.01.028 ↗
42. Effect of iron addition on the precipitation behavior of CoNiCr alloys containing Nb10.1007/BF02811688 ↗
43. Deformation behaviour of γ″ strengthened inconel 71810.1016/0001-6160(88)90139-3 ↗
44. Some aspects of the precipitation of metastable intermetallic phases in INCONEL 71810.1007/BF02647549 ↗
45. Lattice constants and compositions of the metastable Ni3Nb phase precipitated in a Ni-15Cr-8Fe-6Nb alloy10.1007/s11661-998-0243-6 ↗
46. Alloying behavior of Ni3Nb10.2320/matertrans.M2009316 ↗
47. Argon · 2008
48. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
49. An estimate of the strengthening arising from coherent, tetragonally-distorted particles10.1016/0025-5416(74)90020-2 ↗
50. Precipitation hardening in metals10.1179/026708399773002782 ↗
51. Strengthening of nanoprecipitations in an annealed Al0.5CoCrFeNi high entropy alloy10.1016/j.msea.2016.06.040 ↗
52. The formation of cellular precipitate and its effect on the tensile properties of a precipitation strengthened high entropy alloy10.1016/j.matchemphys.2017.09.057 ↗
53. High-temperature tensile strength of Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy (High-Entropy alloy)10.1007/s11837-015-1484-7 ↗
54. Formation and morphology of Kurnakov type D022 compound in disordered face-centered cubic γ–(Ni, Fe) matrix alloys10.1557/jmr.2006.0001 ↗
55. Influence of the co/ni ratio on the γ and γ" precipitation in fe-ni-co-ta alloys10.1007/BF02644030 ↗
56. The influence of cobalt, iron and aluminum on the precipitation of metastable phases in the Ni-Ta system10.1016/0025-5416(83)90185-4 ↗
57. The influence of iron and aluminum on the precipitation of metastable Ni3Nb phases in the Ni-Nb system10.1007/BF02662742 ↗
58. Microstructure evolution during the precipitation and growth of fully coherent DO22 superlattice in an Ni-Cr-W alloy10.1016/j.matchar.2016.06.001 ↗
59. The precipitation of Ni3Nb phases in a Ni−Fe−Cr−Nb alloy10.1007/BF03037800 ↗
60. The effect of Ti on precipitation of fully coherent DO22 superlattice in an Ni-Cr-W-based superalloy10.1016/j.scriptamat.2017.02.037 ↗
61. Phase separation in a Ni–37 at.% Co–5% Nb alloy10.1016/S0921-5093(98)00544-9 ↗