journal article·2018-12

Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures

Jae Wung Bae, Jae Bok Seol, Jongun Moon, Seok Su Sohn, Min Ji Jang, Ho Yong Um, Byeong-Joo Lee, Hyoung Seop Kim

Acta Materialia· Volume 161
Publisher page

Abstract

Abstract High-entropy alloys (HEAs) are a newly emerging class of materials that show attractive mechanical properties for structural applications. Particularly, face-centered cubic (fcc) structured HEAs and medium-entropy alloys (MEAs) such as FeMnCoNiCr and CoNiCr alloys, respectively, which exhibit superior fracture toughness and tensile properties at liquid nitrogen temperature, are the potential HEA materials available for cryogenic applications. Here, we report a ferrous Fe60Co15Ni15Cr10 (at%) MEA exhibiting combination of cryogenic tensile strength of ∼1.5 GPa and ductility of ∼87% due to the multiple-stage strain hardening. Astonishingly, detailed microstructural observations at each stage reveal the sequential operation of deformation-induced phase transformation from parent fcc to newly formed bcc (body-centered cubic) phases. No compositional heterogeneity is observed at phase boundaries, indicating diffusionless phase transformation, as confirmed by atom probe tomography. The transformation to bcc phase occurs predominantly along grain boundaries (GBs) at the early stage of plastic deformation. Simultaneously, numerous deformation-induced shear bands (SBs) having stacking faults associated to the Shockley partial dislocations and thin hcp plates, form within fcc grains. Further deformation leads to the intense nucleation and growth of the bcc phase at the intersections of SBs within fcc grains. These micro-processes consecutively enhance the strain hardening rate, which play a key role in the multiple strain hardening behavior. The in-situ neutron diffraction studies make it clear that the martensite formation and the concurrent load partitioning between the fcc and bcc phases play an important role in the increase in strength. Furthermore, replacing high-cost alloying elements cobalt and nickel with iron, as well as introduction of metastability-engineering at liquid nitrogen temperature, distinguishes the new ferrous MEAs from previously reported equiatomic HEAs. This result underlines insights to provide expanded opportunities for the future development of HEAs for cryogenic applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. The ductile-brittle transition in the fraction of α-rin: I10.1080/14786435808237038 ↗
2. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
3. Tobler · 1978
4. Phase-transformation ductilization of brittle high-entropy alloys via metastability engineering10.1002/adma.201701678 ↗
5. Nanostructured high-entropy alloys with multi principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
6. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
7. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
8. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
9. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
10. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
11. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
12. The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy10.1016/j.actamat.2017.04.033 ↗
13. The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.08.072 ↗
14. A Precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
15. Design of twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
16. Ultrafine-grained AlCoCrFeNi2.1 eutectic high-entropy alloy10.1080/21663831.2016.1160451 ↗
17. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
18. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
19. Phase evolution and densification behavior of nanocrystalline multicomponent high entropy alloys during spark plasma sintering
20. Criterion for sigma phase formation in Cr- and V- containing high-entropy alloys10.1080/21663831.2013.831382 ↗
21. Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system10.1016/j.jallcom.2013.12.210 ↗
22. Acceleration of low-temperature bainite10.2355/isijinternational.43.1821 ↗
23. Phase transformation and properties of Fe-Cr-Co alloys with low cobalt content10.2320/matertrans.M2015077 ↗
24. The Co-Fe (Cobalt-Irion) system
25. Current status of engineering materials diffractometer at J-PARC10.4028/www.scientific.net/MSF.681.443 ↗
26. Rietveld analysis software for J-PARC10.1016/j.nima.2008.11.056 ↗
27. Deformation behavior of an austenitic steel by neutron diffraction
28. The thermo-calc databank system10.1016/0364-5916(85)90021-5 ↗
29. Thermo-Calc · 1999
30. Thermodynamic calculation on the stability of (Fe,Mn)3AlC carbide in high aluminum steels10.1016/j.jallcom.2010.06.032 ↗
31. Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2017.10.014 ↗
32. Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels10.1016/j.actamat.2015.08.027 ↗
33. Properties of metallic materials for LNG service
34. Cryogenic strength and microstructure of a hydrostatically extruded austenitic steel 1.4429 (ALSI 316LN)10.1016/j.cryogenics.2014.07.014 ↗
35. Fracture and strength properties of selected austenitic stainless steels at cryogenic temperatures10.1016/0011-2275(81)90175-2 ↗
36. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
37. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
38. The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures10.1016/j.intermet.2015.11.002 ↗
39. Direct observations of martensite nuclei in stainless steel10.1016/0001-6160(79)90074-9 ↗
40. Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels10.1016/j.actamat.2014.09.017 ↗
41. The effect of experimental variables including the martensitic transformation on the low-temperature mechanical properties of austenitic stainless steels
42. Cullity · 1978
43. A model for transformation plasticity during bainite transformation of steel under external stress10.1016/S1359-6454(03)00333-1 ↗
44. Thermomechanical properties of iron and iron-carbon alloys: density and thermal contraction10.1002/srin.199101722 ↗
45. Calculation of solidification-related thermophysical properties for steels10.1007/s11663-997-0095-2 ↗
46. Lattice parameter and magnetic moment in 3d transition metal alloys: the origin of Invar effects10.1109/TMAG.1972.1067439 ↗
47. Lattice parameters and Curie-point anomalies of iron-cobalt alloys
48. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature10.1016/S1359-6454(98)00248-1 ↗
49. In situ neutron diffraction investigation of the collaborative deformation-transformation mechanism in TRIP-assisted steels at room and elevated temperatures10.1016/j.actamat.2008.03.026 ↗
50. Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: in situ neutron diffraction10.1016/j.actamat.2017.01.034 ↗
51. Cleavage-like fracture along slip planes in Fe-18Cr-3Ni-13Mn-0.37N austenitic stainless steel at liquid helium temperature10.1007/BF02674040 ↗
52. Relationship between stress-induced martensitic transformation and impact toughness in low carbon austenitic steels10.1023/A:1016544821646 ↗
53. Microstructural dependence of Fe-high Mn tensile behavior10.1007/BF02643961 ↗
54. Effect of the strain rate on the TRIP-TWIP transition in austenitic Fe-12 pct Mn-0.6 pct C TWIP steel10.1007/s11661-013-2028-9 ↗
55. Effect of strain rate on the strain-induced γ → α′-martensite transformation and mechanical properties of austenitic stainless steels10.1007/s11661-005-0313-y ↗
56. Effects of temperature and strain rate on TRIP effect in SUS301L metastable austenitic stainless steel10.2355/isijinternational.53.1881 ↗
57. Kinetics of strain-induced martensitic nucleation
58. An experimental study of the martensite nucleation and growth in 18/8 stainless steel10.1016/0001-6160(77)90202-4 ↗
59. A general mechanism of martensitic nucleation: Part II. FCC → BCC and other martensitic transformations
60. Linear complexions: confined chemical and structural states at dislocations10.1126/science.aab2633 ↗
61. Combination of different in situ characterization techniques and scanning electron microscopy investigations for a comprehensive description of the tensile deformation behavior of a CrMnNi TRIP/TWIP steel
62. Deformation bands in high-alloy austenitic 16Cr6Mn6Ni TRIP steel: phase transformation and its consequences on strain hardening at room temperature10.1002/srin.201500005 ↗
63. Rate of propagation of martensite