Compression–compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting
Source abstract
Abstract
Abstract Triply Periodic Minimal Surface (TPMS) porous structures are recognized as the most promising bionic artificial structures for tissue engineering. The fatigue properties of additive manufactured porous structures are essential for long-term use in a dynamical bio-skeletal environment. The aim of this study is to study the compression–compression fatigue behaviour and the underlying fatigue mechanism of Gyroid cellular structures (GCS), a typical TPMS porous structure. The high-cycle fatigue results show that both cyclic ratcheting and fatigue damage phenomena contribute to the failure of GCS during fatigue testing. For most fatigue loading stress, the failure samples have nearly 45° fracture bands along the diagonal surface. The fatigue ratio of GCS reaches 0.35 for as-built samples and can be raised to 0.45 after sandblasting treatment. The fatigue ratio values are higher than most of the other bending-dominated lattice structures, suggesting superior fatigue resistance properties of GCSs due to the smooth surface connection between struts. Besides, a systematic investigation of the crack initiation and propagation was conducted by both deformation analysis and finite element method to support experimental phenomena. The results also indicate that the fatigue resistance properties of GCSs are significantly enhanced by sandblasting post-treatment, through removing the adhered powder particles, inducing compressive residual stress on the surface and generating a nanocrystalline zone.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Minimal surface scaffold designs for tissue engineering10.1016/j.biomaterials.2011.06.012 ↗
2. Schwarz meets Schwann: design and fabrication of biomorphic and durataxic tissue engineering scaffolds10.1016/j.media.2006.06.001 ↗
3. Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting10.1016/j.jmbbm.2015.06.024 ↗
4. Permeability versus design in tpms scaffolds10.3390/ma12081313 ↗
5. Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing10.1016/j.actbio.2010.06.012 ↗
6. A TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering10.1038/s41598-018-25750-9 ↗
7. Triply periodic minimal surfaces sheet scaffolds for tissue engineering applications: an optimization approach toward biomimetic scaffold design10.1021/acsabm.8b00052 ↗
8. The design of additively manufactured lattices to increase the functionality of medical implants10.1016/j.msec.2018.10.052 ↗
9. Porous-coated hip replacement. The factors governing bone ingrowth, stress shielding, and clinical results10.1302/0301-620X.69B1.3818732 ↗
10. On the effects of geometry, defects, and material asymmetry on the mechanical response of shape memory alloy cellular lattice structures10.1088/0964-1726/25/2/025008 ↗
11. Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size10.1007/s11340-015-0021-5 ↗
12. Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM10.1016/j.matdes.2018.01.059 ↗
13. Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells10.1016/j.jmbbm.2014.02.003 ↗
14. Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction10.1016/j.matdes.2016.11.090 ↗
15. Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials10.1016/j.matdes.2017.02.021 ↗
16. Compression deformation behavior of Ti-6Al-4V alloy with cellular structures fabricated by electron beam melting10.1016/j.jmbbm.2012.10.005 ↗
17. Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting10.1016/j.msea.2008.04.002 ↗
18. Evaluations of cellular lattice structures manufactured using selective laser melting10.1016/j.ijmachtools.2012.06.002 ↗
19. Gyroid porous titanium structures: a versatile solution to be used as scaffolds in bone defect reconstruction10.1016/j.matdes.2017.11.050 ↗
20. Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading10.1016/j.matdes.2018.05.058 ↗
21. Continuous graded gyroid cellular structures fabricated by selective laser melting: design, manufacturing and mechanical properties10.1016/j.matdes.2018.12.007 ↗
22. Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications10.1016/j.msec.2016.06.016 ↗
23. The stiffness and strength of the gyroid lattice10.1016/j.ijsolstr.2014.06.024 ↗
24. Functionally graded porous scaffolds in multiple patterns: new design method, physical and mechanical properties10.1016/j.matdes.2018.09.053 ↗
25. Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting10.1016/j.ijmecsci.2018.08.039 ↗
26. Additively manufactured metallic porous biomaterials based on minimal surfaces: a unique combination of topological, mechanical, and mass transport properties10.1016/j.actbio.2017.02.024 ↗
27. Fatigue behavior of as-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering10.1016/j.actbio.2019.05.046 ↗
28. Creep contributes to the fatigue behavior of bovine trabecular bone10.1115/1.2834757 ↗
29. Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem10.1016/j.jmbbm.2013.03.002 ↗
30. Fatigue properties of a dental implant produced by electron beam melting® (EBM)10.1016/j.jmatprotec.2015.07.013 ↗
31. Influence of layer thickness and post-process treatments on the fatigue properties of CoCr scaffolds produced by laser powder bed fusion
32. Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)10.1002/jbm.b.31901 ↗
33. Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion10.1016/j.ijfatigue.2019.01.013 ↗
34. Investigation on the orientation dependence of elastic response in gyroid cellular structures10.1016/j.jmbbm.2018.09.042 ↗
35. Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
36. Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique10.1016/j.ijmecsci.2012.12.004 ↗
37. Enhancement of fatigue and corrosion properties of pure Ti by sandblasting10.1016/j.msea.2006.04.024 ↗
38. The influence of surface enhancement by low plasticity burnishing on the corrosion fatigue performance of AA7075-T610.1016/j.ijfatigue.2004.01.010 ↗
39. The effect of shot peening on the fatigue behavior of alloy 7075-T610.1007/BF02658332 ↗
40. Comparison between the improvements made to the fatigue strength of stainless steel by cavitation peening, water jet peening, shot peening and laser peening10.1016/j.jmatprotec.2019.01.030 ↗
41. mechanical and in vitro characterization of individually structured Ti–6Al–4V produced by direct laser forming10.1016/j.biomaterials.2005.07.041 ↗
42. Improved bioactivity of selective laser melting titanium: surface modification with micro-/nano-textured hierarchical topography and bone regeneration performance evaluation10.1016/j.msec.2016.05.096 ↗
43. I. Standard, ISO 13314: 2011 (E) (2011) Mechanical Testing of Metals—Ductility Testing—Compression Test for Porous and Cellular Metals, Ref Number ISO, pp. 1–7.
44. Fatigue performance of additively manufactured meta-biomaterials: the effects of topology and material type10.1016/j.actbio.2017.11.014 ↗
45. 2017
46. Effects of scanning path and overlapping rate on residual stress of 316L stainless steel blade subjected to massive laser shock peening treatment with square spots10.1016/j.apsusc.2019.03.093 ↗
47. Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading10.1016/j.actamat.2016.05.054 ↗
48. Improving the fatigue performance of porous metallic biomaterials produced by selective laser melting10.1016/j.actbio.2016.10.005 ↗
49. Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting10.1016/j.actbio.2008.03.013 ↗
50. Manufacturability of AlSi10Mg overhang structures fabricated by laser powder bed fusion10.1016/j.matdes.2018.10.043 ↗
51. Feedback control of selective laser melting
52. Study on the designing rules and processability of porous structure based on selective laser melting (SLM)10.1016/j.jmatprotec.2013.05.001 ↗
53. Mechanical, electrochemical and tribological properties of nano-crystalline surface of 304 stainless steel10.1016/S0043-1648(03)00055-3 ↗
54. Smooth-shell metamaterials of cubic symmetry: anisotropic elasticity, yield strength and specific energy absorption10.1016/j.actamat.2018.10.034 ↗
55. Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: simulations & experiments10.1016/j.jmps.2018.08.022 ↗
56. Anisotropy in the microstructure and mechanical property for the bulk and porous 316L stainless steel fabricated via selective laser melting10.1016/j.matlet.2018.09.152 ↗
57. Effect of molten pool boundaries on the mechanical properties of selective laser melting parts10.1016/j.jmatprotec.2014.06.002 ↗
58. Corrosion fatigue behavior of additively manufactured biodegradable porous iron10.1016/j.corsci.2019.05.003 ↗
59. Biodegradation-affected fatigue behavior of additively manufactured porous magnesium
60. Microstructure and fracture behavior of 316L Austenitic stainless steel produced by selective laser melting10.1016/j.jmst.2016.06.016 ↗
61. Compression–compression fatigue of open cell aluminum foams: macro-/micro- mechanisms and the effects of heat treatment10.1016/j.msea.2003.08.009 ↗
62. Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting10.1016/j.actamat.2018.02.060 ↗
63. The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting10.1016/j.jmbbm.2016.01.034 ↗
64. Effect of pore geometry on the fatigue properties and cell affinity of porous titanium scaffolds fabricated by selective laser melting10.1016/j.jmbbm.2018.08.048 ↗
65. Enhanced fatigue properties of nanostructured austenitic sus 316L stainless steel10.1016/j.actamat.2011.07.061 ↗
66. Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting10.1016/j.actamat.2011.10.051 ↗
67. Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer10.1016/j.actamat.2014.12.057 ↗
68. On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting10.1016/j.engfracmech.2014.03.008 ↗
69. Compression fracture of CFRP laminates containing stress intensifications10.3390/ma10091039 ↗
70. Deformation and fracture behavior of laser processed dense and porous Ti6Al4V alloy under static and dynamic loadinge10.1016/j.msea.2012.04.036 ↗
71. Failure mechanisms of additively manufactured porous biomaterials: effects of porosity and type of unit cell10.1016/j.jmbbm.2015.06.012 ↗
72. The stress-life fatigue behaviour of aluminium alloy foams10.1046/j.1460-2695.2000.00261.x ↗
73. Micromechanically-motivated phenomenological Hosford–Coulomb model for predicting ductile fracture initiation at low stress triaxialities10.1016/j.ijsolstr.2015.02.024 ↗
74. Anisotropic Hosford–Coulomb fracture initiation model: theory and application10.1016/j.engfracmech.2015.08.004 ↗
75. A generalized isotropic yield criterion10.1115/1.3422732 ↗
76. Ductility and the workability of metals
77. Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell10.1016/j.jmbbm.2015.07.013 ↗
78. Ratchetting: recent progresses in phenomenon observation, constitutive modeling and application10.1016/j.ijfatigue.2007.10.002 ↗
79. Experimental investigations into the influence of cyclic phenomena of metals on structural ratchetting behaviour10.1016/0020-7403(84)90016-X ↗
80. Modeling of cyclic ratchetting plasticity, part I: development of constitutive relations10.1115/1.2823355 ↗
81. Influence of cell shape on mechanical properties of Ti-6Al-4V meshes fabricated by electron beam melting method10.1016/j.actbio.2014.06.010 ↗
82. Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses10.1016/j.actamat.2004.03.011 ↗
83. Advanced lattice support structures for metal additive manufacturing10.1016/j.jmatprotec.2013.01.020 ↗
84. Improved fatigue resistance of gradient nanograined Cu10.1016/j.actamat.2018.12.018 ↗
85. Grain size effects on the fatigue response of nanocrystalline metals10.1016/S1359-6462(03)00393-2 ↗